{
"NDC": [
{
"NDCCode": "83634-500-81",
"PackageDescription": "24 POUCH in 1 CARTON (83634-500-81) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG",
"NDC11Code": "83634-0500-81",
"ProductNDC": "83634-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240422",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "83634-501-81",
"PackageDescription": "24 POUCH in 1 CARTON (83634-501-81) / 1 BAG in 1 POUCH (83634-501-41) / 50 mL in 1 BAG",
"NDC11Code": "83634-0501-81",
"ProductNDC": "83634-501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "80",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240422",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "83634-500-82",
"PackageDescription": "24 POUCH in 1 CARTON (83634-500-82) / 1 BAG in 1 POUCH (83634-500-42) / 100 mL in 1 BAG",
"NDC11Code": "83634-0500-82",
"ProductNDC": "83634-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240422",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "83634-500-83",
"PackageDescription": "30 POUCH in 1 CARTON (83634-500-83) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG",
"NDC11Code": "83634-0500-83",
"ProductNDC": "83634-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250915",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "46123-500-02",
"PackageDescription": "1.81 kg in 1 CYLINDER (46123-500-02) ",
"NDC11Code": "46123-0500-02",
"ProductNDC": "46123-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbon Dioxide",
"NonProprietaryName": "Carbon Dioxide",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19670101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205764",
"LabelerName": "Roberts Oxygen Company, Inc.",
"SubstanceName": "CARBON DIOXIDE",
"StrengthNumber": "990",
"StrengthUnit": "g/kg",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19670101",
"SamplePackage": "N"
},
{
"NDCCode": "58575-161-81",
"PackageDescription": "500 mL in 1 POUCH (58575-161-81) ",
"NDC11Code": "58575-0161-81",
"ProductNDC": "58575-161",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ics3 Blue Healthcare Hand Antiseptic",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140801",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Inopak, Ltd",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "56.525",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2020-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20140801",
"SamplePackage": "N"
},
{
"NDCCode": "59651-500-81",
"PackageDescription": "8000 TABLET, FILM COATED in 1 BAG (59651-500-81) ",
"NDC11Code": "59651-0500-81",
"ProductNDC": "59651-500",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"StartMarketingDate": "20211007",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2026-03-04",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "07-OCT-21"
},
{
"NDCCode": "73069-500-81",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BOX (73069-500-81) > 100 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "73069-0500-81",
"ProductNDC": "73069-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viatrexx-systemic Detox",
"NonProprietaryName": "Adrenal Gland, .alpha.-ketoglutaric Acid, .alpha.-lipoic Acid, Pork Liver, Lycopodium Clavatum Spore, Lymph, Mesenchyme, Strychnos Nux-vomica Seed , Taraxacum Officinale, Thymus, Tonsil, Thyroid, Ascorbic Acid, Berberis Vulgaris Root, Activated Charcoal, Centaurea Benedicta, Milk Thistle, Colchicum Autumnale Bulb, Galium Aparine, Binetrakin, Kidney, Beef Liver",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "VIATREXX BIO INCORPORATED",
"SubstanceName": "BOS TAURUS ADRENAL GLAND; SUS SCROFA ADRENAL GLAND; .ALPHA.-KETOGLUTARIC ACID; .ALPHA.-LIPOIC ACID; PORK LIVER; LYCOPODIUM CLAVATUM SPORE; BOS TAURUS LYMPH; SUS SCROFA LYMPH; BOS TAURUS MESENCHYME; SUS SCROFA MESENCHYME; STRYCHNOS NUX-VOMICA SEED; TARAXACUM OFFICINALE; BOS TAURUS THYMUS; SUS SCROFA THYMUS; BOS TAURUS TONSIL; SUS SCROFA TONSIL; THYROID, BOVINE; THYROID, PORCINE; ASCORBIC ACID; BERBERIS VULGARIS ROOT; ACTIVATED CHARCOAL; CENTAUREA BENEDICTA; MILK THISTLE; COLCHICUM AUTUMNALE BULB; GALIUM APARINE; BINETRAKIN; BEEF KIDNEY; PORK KIDNEY; BEEF LIVER",
"StrengthNumber": "31; 31; 31; 31; 201; 4; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 200; 200; 30; 201; 31; 31; 31; 7; 31; 201; 201; 201; 201",
"StrengthUnit": "[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Plant Proteins [CS],Seed Storage Proteins [CS],Vitamin C [EPC],Ascorbic Acid [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190506",
"SamplePackage": "N"
},
{
"NDCCode": "76297-001-81",
"PackageDescription": "24 BAG in 1 CARTON (76297-001-81) / 500 mL in 1 BAG (76297-001-82) ",
"NDC11Code": "76297-0001-81",
"ProductNDC": "76297-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207956",
"LabelerName": "LABORATORIOS GRIFOLS SA",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "g/1000mL",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220806",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.",
"Description": "Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems."
},
{
"NDCCode": "78829-500-81",
"PackageDescription": "3785 mL in 1 JUG (78829-500-81) ",
"NDC11Code": "78829-0500-81",
"ProductNDC": "78829-500",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Liquidproof",
"ProprietaryNameSuffix": "Gel Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Four Fathers Distillery LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201001",
"SamplePackage": "N",
"IndicationAndUsage": "Use(s): Helps reduce bacteria that can potentially become disease."
},
{
"NDCCode": "83634-107-20",
"PackageDescription": "1 VIAL in 1 CARTON (83634-107-20) / 10 mL in 1 VIAL",
"NDC11Code": "83634-0107-20",
"ProductNDC": "83634-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212022",
"LabelerName": "Avenacy Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20250115",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and, , 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis (1.2) , 3 Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3) .",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine Ɛ1- lactone. The chemical structure is:. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, nonpyrogenic, preservative-free, pale yellow to light brown, lyophilized cake/powder containing approximately 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.7)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown."
},
{
"NDCCode": "83634-114-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (83634-114-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-114-41) ",
"NDC11Code": "83634-0114-20",
"ProductNDC": "83634-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "83634-115-30",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (83634-115-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-115-41) ",
"NDC11Code": "83634-0115-30",
"ProductNDC": "83634-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "83634-116-30",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (83634-116-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-116-41) ",
"NDC11Code": "83634-0116-30",
"ProductNDC": "83634-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "83634-205-50",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-205-50) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0205-50",
"ProductNDC": "83634-205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218644",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide ."
},
{
"NDCCode": "83634-206-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-206-51) / 50 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0206-51",
"ProductNDC": "83634-206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218644",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide ."
},
{
"NDCCode": "83634-207-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-207-51) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0207-51",
"ProductNDC": "83634-207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218644",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide ."
},
{
"NDCCode": "83634-305-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-305-10) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0305-10",
"ProductNDC": "83634-305",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetazolamide",
"NonProprietaryName": "Acetazolamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202693",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "ACETAZOLAMIDE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250831",
"SamplePackage": "N",
"IndicationAndUsage": "For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure. Acetazolamide is also indicated for the prevention or amelioration of symptoms associated with acute mountain sickness in climbers attempting rapid ascent and in those who are very susceptible to acute mountain sickness despite gradual ascent.",
"Description": "Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1, 3, 4-thiadiazol-2-yl)-acetamide and has the following chemical structure:. Acetazolamide is available for intravenous use, and is supplied as a sterile powder requiring reconstitution. Each vial contains an amount of acetazolamide sodium equivalent to 500 mg of acetazolamide. The bulk solution is adjusted to pH 9.6 using sodium hydroxide NF and, if necessary, hydrochloric acid NF prior to lyophilization."
},
{
"NDCCode": "0054-0326-56",
"PackageDescription": "1 POUCH in 1 CARTON (0054-0326-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
"NDC11Code": "00054-0326-56",
"ProductNDC": "0054-0326",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20201217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203433",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 100",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201217",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0054-0327-56",
"PackageDescription": "1 POUCH in 1 CARTON (0054-0327-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
"NDC11Code": "00054-0327-56",
"ProductNDC": "0054-0327",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20201217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203433",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 250",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201217",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0054-0328-56",
"PackageDescription": "1 POUCH in 1 CARTON (0054-0328-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER",
"NDC11Code": "00054-0328-56",
"ProductNDC": "0054-0328",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20201217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203433",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 500",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231219",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0093-7516-31",
"PackageDescription": "1 POUCH in 1 CARTON (0093-7516-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
"NDC11Code": "00093-7516-31",
"ProductNDC": "0093-7516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213948",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "500; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0093-7517-31",
"PackageDescription": "1 POUCH in 1 CARTON (0093-7517-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
"NDC11Code": "00093-7517-31",
"ProductNDC": "0093-7517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213948",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "100; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0093-7518-31",
"PackageDescription": "1 POUCH in 1 CARTON (0093-7518-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER",
"NDC11Code": "00093-7518-31",
"ProductNDC": "0093-7518",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluticasone Propionate And Salmeterol",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213948",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "250; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220323",
"SamplePackage": "N",
"IndicationAndUsage": "Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0695-00",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0695-00) / 60 POWDER in 1 INHALER",
"NDC11Code": "00173-0695-00",
"ProductNDC": "0173-0695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Advair",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021077",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 100",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010228",
"SamplePackage": "N",
"IndicationAndUsage": "ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0695-04",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0695-04) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0695-04",
"ProductNDC": "0173-0695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Advair",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021077",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "100; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010228",
"SamplePackage": "N",
"IndicationAndUsage": "ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0696-00",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0696-00) / 60 POWDER in 1 INHALER",
"NDC11Code": "00173-0696-00",
"ProductNDC": "0173-0696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Advair",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010205",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021077",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 250",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010205",
"SamplePackage": "N",
"IndicationAndUsage": "ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0696-04",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0696-04) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0696-04",
"ProductNDC": "0173-0696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Advair",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010205",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021077",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "250; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010205",
"SamplePackage": "N",
"IndicationAndUsage": "ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0697-00",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0697-00) / 60 POWDER in 1 INHALER",
"NDC11Code": "00173-0697-00",
"ProductNDC": "0173-0697",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Advair",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010305",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021077",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE",
"StrengthNumber": "50; 500",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20010305",
"SamplePackage": "N",
"IndicationAndUsage": "ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0697-04",
"PackageDescription": "1 INHALER in 1 CARTON (0173-0697-04) / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0697-04",
"ProductNDC": "0173-0697",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Advair",
"ProprietaryNameSuffix": "Diskus",
"NonProprietaryName": "Fluticasone Propionate And Salmeterol",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010305",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021077",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE",
"StrengthNumber": "500; 50",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010305",
"SamplePackage": "N",
"IndicationAndUsage": "ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).",
"Description": "ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>83634-500-81</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (83634-500-81) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0500-81</NDC11Code>
<ProductNDC>83634-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>83634-501-81</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (83634-501-81) / 1 BAG in 1 POUCH (83634-501-41) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0501-81</NDC11Code>
<ProductNDC>83634-501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>83634-500-82</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (83634-500-82) / 1 BAG in 1 POUCH (83634-500-42) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0500-82</NDC11Code>
<ProductNDC>83634-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>83634-500-83</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (83634-500-83) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0500-83</NDC11Code>
<ProductNDC>83634-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>46123-500-02</NDCCode>
<PackageDescription>1.81 kg in 1 CYLINDER (46123-500-02) </PackageDescription>
<NDC11Code>46123-0500-02</NDC11Code>
<ProductNDC>46123-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbon Dioxide</ProprietaryName>
<NonProprietaryName>Carbon Dioxide</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19670101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205764</ApplicationNumber>
<LabelerName>Roberts Oxygen Company, Inc.</LabelerName>
<SubstanceName>CARBON DIOXIDE</SubstanceName>
<StrengthNumber>990</StrengthNumber>
<StrengthUnit>g/kg</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19670101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58575-161-81</NDCCode>
<PackageDescription>500 mL in 1 POUCH (58575-161-81) </PackageDescription>
<NDC11Code>58575-0161-81</NDC11Code>
<ProductNDC>58575-161</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ics3 Blue Healthcare Hand Antiseptic</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Inopak, Ltd</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>56.525</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59651-500-81</NDCCode>
<PackageDescription>8000 TABLET, FILM COATED in 1 BAG (59651-500-81) </PackageDescription>
<NDC11Code>59651-0500-81</NDC11Code>
<ProductNDC>59651-500</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<StartMarketingDate>20211007</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-03-04</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>07-OCT-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>73069-500-81</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BOX (73069-500-81) > 100 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>73069-0500-81</NDC11Code>
<ProductNDC>73069-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viatrexx-systemic Detox</ProprietaryName>
<NonProprietaryName>Adrenal Gland, .alpha.-ketoglutaric Acid, .alpha.-lipoic Acid, Pork Liver, Lycopodium Clavatum Spore, Lymph, Mesenchyme, Strychnos Nux-vomica Seed , Taraxacum Officinale, Thymus, Tonsil, Thyroid, Ascorbic Acid, Berberis Vulgaris Root, Activated Charcoal, Centaurea Benedicta, Milk Thistle, Colchicum Autumnale Bulb, Galium Aparine, Binetrakin, Kidney, Beef Liver</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>VIATREXX BIO INCORPORATED</LabelerName>
<SubstanceName>BOS TAURUS ADRENAL GLAND; SUS SCROFA ADRENAL GLAND; .ALPHA.-KETOGLUTARIC ACID; .ALPHA.-LIPOIC ACID; PORK LIVER; LYCOPODIUM CLAVATUM SPORE; BOS TAURUS LYMPH; SUS SCROFA LYMPH; BOS TAURUS MESENCHYME; SUS SCROFA MESENCHYME; STRYCHNOS NUX-VOMICA SEED; TARAXACUM OFFICINALE; BOS TAURUS THYMUS; SUS SCROFA THYMUS; BOS TAURUS TONSIL; SUS SCROFA TONSIL; THYROID, BOVINE; THYROID, PORCINE; ASCORBIC ACID; BERBERIS VULGARIS ROOT; ACTIVATED CHARCOAL; CENTAUREA BENEDICTA; MILK THISTLE; COLCHICUM AUTUMNALE BULB; GALIUM APARINE; BINETRAKIN; BEEF KIDNEY; PORK KIDNEY; BEEF LIVER</SubstanceName>
<StrengthNumber>31; 31; 31; 31; 201; 4; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 200; 200; 30; 201; 31; 31; 31; 7; 31; 201; 201; 201; 201</StrengthNumber>
<StrengthUnit>[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Plant Proteins [CS],Seed Storage Proteins [CS],Vitamin C [EPC],Ascorbic Acid [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76297-001-81</NDCCode>
<PackageDescription>24 BAG in 1 CARTON (76297-001-81) / 500 mL in 1 BAG (76297-001-82) </PackageDescription>
<NDC11Code>76297-0001-81</NDC11Code>
<ProductNDC>76297-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207956</ApplicationNumber>
<LabelerName>LABORATORIOS GRIFOLS SA</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>g/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Chloride Injection, USP is indicated as a source of water and electrolytes. 0.9% Sodium Chloride Injection, USP is also indicated for use as a priming solution in hemodialysis procedures.</IndicationAndUsage>
<Description>Sodium Chloride Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. The pH ranges from 4.5 to 7.0. Composition, osmolarity, and ionic concentration are shown below. 0.9% Sodium Chloride Injection, USP contains 9 g/L Sodium Chloride, USP (NaCl) with an osmolarity of 308 mOsmol/L (calc). It contains 154 mEq/L sodium and 154 mEq/L chloride. The FLEBOFLEX and FLEBOFLEX LUER plastic containers are fabricated from latex-free polyolefins or polypropylene plastic materials. The solution contact materials do not contain PVC, DEHP, or other plasticizers. The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. The suitability of the container materials has been established through biological evaluations, which have shown the containers pass Class VI U.S. Pharmacopeia (USP) testing for plastic containers. These tests confirm the biological safety of the container systems.</Description>
</NDC>
<NDC>
<NDCCode>78829-500-81</NDCCode>
<PackageDescription>3785 mL in 1 JUG (78829-500-81) </PackageDescription>
<NDC11Code>78829-0500-81</NDC11Code>
<ProductNDC>78829-500</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Liquidproof</ProprietaryName>
<ProprietaryNameSuffix>Gel Hand Sanitizer</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Four Fathers Distillery LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use(s): Helps reduce bacteria that can potentially become disease.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>83634-107-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (83634-107-20) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>83634-0107-20</NDC11Code>
<ProductNDC>83634-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212022</ApplicationNumber>
<LabelerName>Avenacy Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and, , 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis (1.2) , 3 Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3) .</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine Ɛ1- lactone. The chemical structure is:. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, nonpyrogenic, preservative-free, pale yellow to light brown, lyophilized cake/powder containing approximately 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.7)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown.</Description>
</NDC>
<NDC>
<NDCCode>83634-114-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (83634-114-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-114-41) </PackageDescription>
<NDC11Code>83634-0114-20</NDC11Code>
<ProductNDC>83634-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>83634-115-30</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (83634-115-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-115-41) </PackageDescription>
<NDC11Code>83634-0115-30</NDC11Code>
<ProductNDC>83634-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>83634-116-30</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (83634-116-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-116-41) </PackageDescription>
<NDC11Code>83634-0116-30</NDC11Code>
<ProductNDC>83634-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>83634-205-50</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-205-50) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0205-50</NDC11Code>
<ProductNDC>83634-205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218644</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide .</Description>
</NDC>
<NDC>
<NDCCode>83634-206-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-206-51) / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0206-51</NDC11Code>
<ProductNDC>83634-206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218644</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide .</Description>
</NDC>
<NDC>
<NDCCode>83634-207-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-207-51) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0207-51</NDC11Code>
<ProductNDC>83634-207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218644</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide .</Description>
</NDC>
<NDC>
<NDCCode>83634-305-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-305-10) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0305-10</NDC11Code>
<ProductNDC>83634-305</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetazolamide</ProprietaryName>
<NonProprietaryName>Acetazolamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202693</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>ACETAZOLAMIDE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure. Acetazolamide is also indicated for the prevention or amelioration of symptoms associated with acute mountain sickness in climbers attempting rapid ascent and in those who are very susceptible to acute mountain sickness despite gradual ascent.</IndicationAndUsage>
<Description>Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1, 3, 4-thiadiazol-2-yl)-acetamide and has the following chemical structure:. Acetazolamide is available for intravenous use, and is supplied as a sterile powder requiring reconstitution. Each vial contains an amount of acetazolamide sodium equivalent to 500 mg of acetazolamide. The bulk solution is adjusted to pH 9.6 using sodium hydroxide NF and, if necessary, hydrochloric acid NF prior to lyophilization.</Description>
</NDC>
<NDC>
<NDCCode>0054-0326-56</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0054-0326-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00054-0326-56</NDC11Code>
<ProductNDC>0054-0326</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20201217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203433</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 100</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0054-0327-56</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0054-0327-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00054-0327-56</NDC11Code>
<ProductNDC>0054-0327</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20201217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203433</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 250</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0054-0328-56</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0054-0328-56) / 1 INHALER in 1 POUCH / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00054-0328-56</NDC11Code>
<ProductNDC>0054-0328</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20201217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203433</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 500</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder is fluticasone propionate, a corticosteroid having the chemical name S-fluoromethyl-6α,9α-difluoro-11β-hydroxy-16α-methyl-3-oxo-17α-propionyloxyandrosta-1,4-diene-17β-carbothioate and the following chemical structure. Fluticasone propionate is a white or almost white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 1,3-benzenedimethanol, 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-(±)-,1-hydroxy-2-naphthalenecarboxylate (salt) and the following chemical structure. Salmeterol xinafoate is a white to off-white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder is in a gray plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100 mcg, 250 mcg, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder delivers 93 mcg, 233 mcg, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from fluticasone propionate and salmeterol inhalation powder 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4‑year‑old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8‑year‑old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0093-7516-31</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0093-7516-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00093-7516-31</NDC11Code>
<ProductNDC>0093-7516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213948</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>500; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0093-7517-31</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0093-7517-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00093-7517-31</NDC11Code>
<ProductNDC>0093-7517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213948</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0093-7518-31</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0093-7518-31) > 1 INHALER in 1 POUCH > 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00093-7518-31</NDC11Code>
<ProductNDC>0093-7518</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluticasone Propionate And Salmeterol</ProprietaryName>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213948</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>250; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluticasone propionate and salmeterol inhalation powder is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>Fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, 250 mcg/50 mcg, and 500 mcg/50 mcg are combinations of fluticasone propionate, USP and salmeterol xinafoate, USP. One active component of fluticasone propionate and salmeterol inhalation powder, USP is fluticasone propionate USP, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure. Fluticasone propionate, USP is a white powder with a molecular weight of 500.57, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of fluticasone propionate and salmeterol inhalation powder, USP is salmeterol xinafoate USP, a beta2-adrenergic bronchodilator. Salmeterol xinafoate, USP is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino] methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate, USP is a white powder with a molecular weight of 603.75, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. Fluticasone propionate and salmeterol inhalation powder, USP is supplied in a green plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate, USP (100, 250, or 500 mcg) and micronized salmeterol xinafoate, USP salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, fluticasone propionate and salmeterol inhalation powder inhaler delivers 93, 233, and 465 mcg of fluticasone propionate, USP and 45 mcg of salmeterol base, per blister from fluticasone propionate and salmeterol inhalation powder USP, 100 mcg/50 mcg, fluticasone propionate and salmeterol inhalation powder USP, 250 mcg/50 mcg, and fluticasone propionate and salmeterol inhalation powder USP, 500 mcg/50 mcg, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through another dry powder inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through another dry powder inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through another dry powder inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0695-00</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0695-00) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0695-00</NDC11Code>
<ProductNDC>0173-0695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Advair</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010228</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 100</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0695-04</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0695-04) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0695-04</NDC11Code>
<ProductNDC>0173-0695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Advair</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010228</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0696-00</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0696-00) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0696-00</NDC11Code>
<ProductNDC>0173-0696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Advair</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010205</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 250</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0696-04</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0696-04) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0696-04</NDC11Code>
<ProductNDC>0173-0696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Advair</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010205</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>250; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0697-00</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0697-00) / 60 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0697-00</NDC11Code>
<ProductNDC>0173-0697</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Advair</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010305</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>SALMETEROL XINAFOATE; FLUTICASONE PROPIONATE</SubstanceName>
<StrengthNumber>50; 500</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0697-04</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (0173-0697-04) / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0697-04</NDC11Code>
<ProductNDC>0173-0697</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Advair</ProprietaryName>
<ProprietaryNameSuffix>Diskus</ProprietaryNameSuffix>
<NonProprietaryName>Fluticasone Propionate And Salmeterol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010305</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021077</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE PROPIONATE; SALMETEROL XINAFOATE</SubstanceName>
<StrengthNumber>500; 50</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADVAIR DISKUS is a combination product containing a corticosteroid and a long-acting beta2-adrenergic agonist (LABA) indicated for: 1 Twice-daily treatment of asthma in patients aged 4 years and older. (1.1), 2 Maintenance treatment of airflow obstruction and reducing exacerbations in patients with chronic obstructive pulmonary disease (COPD). (1.2).</IndicationAndUsage>
<Description>ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50 are combinations of fluticasone propionate and salmeterol xinafoate. One active component of ADVAIR DISKUS is fluticasone propionate, a corticosteroid having the chemical name S-(fluoromethyl) 6α,9-difluoro-11β,17-dihydroxy-16α-methyl-3-oxoandrosta-1,4-diene-17β-carbothioate, 17-propionate and the following chemical structure:. Fluticasone propionate is a white powder with a molecular weight of 500.6, and the empirical formula is C25H31F3O5S. It is practically insoluble in water, freely soluble in dimethyl sulfoxide and dimethylformamide, and slightly soluble in methanol and 95% ethanol. The other active component of ADVAIR DISKUS is salmeterol xinafoate, a beta2-adrenergic bronchodilator. Salmeterol xinafoate is the racemic form of the 1-hydroxy-2-naphthoic acid salt of salmeterol. It has the chemical name 4-hydroxy-α1-[[[6-(4-phenylbutoxy)hexyl]amino]methyl]-1,3-benzenedimethanol, 1-hydroxy-2-naphthalenecarboxylate and the following chemical structure. Salmeterol xinafoate is a white powder with a molecular weight of 603.8, and the empirical formula is C25H37NO4C11H8O3. It is freely soluble in methanol; slightly soluble in ethanol, chloroform, and isopropanol; and sparingly soluble in water. ADVAIR DISKUS is a purple plastic inhaler containing a foil blister strip. Each blister on the strip contains a white powder mix of micronized fluticasone propionate (100, 250, or 500 mcg) and micronized salmeterol xinafoate salt (72.5 mcg, equivalent to 50 mcg of salmeterol base) in 12.5 mg of formulation containing lactose monohydrate (which contains milk proteins). After the inhaler is activated, the powder is dispersed into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, ADVAIR DISKUS delivers 93, 233, and 465 mcg of fluticasone propionate and 45 mcg of salmeterol base per blister from ADVAIR DISKUS 100/50, ADVAIR DISKUS 250/50, and ADVAIR DISKUS 500/50, respectively, when tested at a flow rate of 60 L/min for 2 seconds. In adult subjects with obstructive lung disease and severely compromised lung function (mean FEV1 20% to 30% of predicted), mean peak inspiratory flow (PIF) through the DISKUS inhaler was 82.4 L/min (range: 46.1 to 115.3 L/min). Inhalation profiles for adolescent (N = 13, aged 12 to 17 years) and adult (N = 17, aged 18 to 50 years) subjects with asthma inhaling maximally through the DISKUS inhaler show mean PIF of 122.2 L/min (range: 81.6 to 152.1 L/min). Inhalation profiles for pediatric subjects with asthma inhaling maximally through the DISKUS inhaler show a mean PIF of 75.5 L/min (range: 49.0 to 104.8 L/min) for the 4-year-old subject set (N = 20) and 107.3 L/min (range: 82.8 to 125.6 L/min) for the 8-year-old subject set (N = 20). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
</NDCList>