{
"NDC": [
{
"NDCCode": "83634-500-83",
"PackageDescription": "30 POUCH in 1 CARTON (83634-500-83) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG",
"NDC11Code": "83634-0500-83",
"ProductNDC": "83634-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250915",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "83634-500-81",
"PackageDescription": "24 POUCH in 1 CARTON (83634-500-81) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG",
"NDC11Code": "83634-0500-81",
"ProductNDC": "83634-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240422",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "83634-500-82",
"PackageDescription": "24 POUCH in 1 CARTON (83634-500-82) / 1 BAG in 1 POUCH (83634-500-42) / 100 mL in 1 BAG",
"NDC11Code": "83634-0500-82",
"ProductNDC": "83634-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate In Water",
"NonProprietaryName": "Magnesium Sulfate In Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209642",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240422",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.",
"Description": "Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period."
},
{
"NDCCode": "0395-8102-83",
"PackageDescription": "500 mg in 1 CONTAINER (0395-8102-83) ",
"NDC11Code": "00395-8102-83",
"ProductNDC": "0395-8102",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "POWDER",
"StartMarketingDate": "20180710",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Humco Holding Group, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "1",
"StrengthUnit": "mg/mg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "10-JUL-18"
},
{
"NDCCode": "57664-500-83",
"PackageDescription": "30 TABLET in 1 BOTTLE (57664-500-83) ",
"NDC11Code": "57664-0500-83",
"ProductNDC": "57664-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20040422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076541",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2022-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20040422",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].",
"Description": "Mirtazapine tablets contain mirtazapine, USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro- 2-methylpyrazino [2,1-a] pyrido [2,3-c] [2] benzazepine and has the empirical formula of C17H19N3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture. Mirtazapine, USP is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 mg or 30 mg of mirtazapine, USP, and unscored film-coated tablets containing 7.5 mg or 45 mg of mirtazapine, USP. Each tablet contains colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose 2910, lactose monohydrate, magnesium stearate, pregelatinized starch, and titanium dioxide. The 7.5 mg and 15 mg tablets also contains iron oxide (yellow) and the 30 mg tablets also contains iron oxides (yellow, red and black)."
},
{
"NDCCode": "73069-500-83",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 BOX (73069-500-83) > 100 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "73069-0500-83",
"ProductNDC": "73069-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viatrexx-systemic Detox",
"NonProprietaryName": "Adrenal Gland, .alpha.-ketoglutaric Acid, .alpha.-lipoic Acid, Pork Liver, Lycopodium Clavatum Spore, Lymph, Mesenchyme, Strychnos Nux-vomica Seed , Taraxacum Officinale, Thymus, Tonsil, Thyroid, Ascorbic Acid, Berberis Vulgaris Root, Activated Charcoal, Centaurea Benedicta, Milk Thistle, Colchicum Autumnale Bulb, Galium Aparine, Binetrakin, Kidney, Beef Liver",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "VIATREXX BIO INCORPORATED",
"SubstanceName": "BOS TAURUS ADRENAL GLAND; SUS SCROFA ADRENAL GLAND; .ALPHA.-KETOGLUTARIC ACID; .ALPHA.-LIPOIC ACID; PORK LIVER; LYCOPODIUM CLAVATUM SPORE; BOS TAURUS LYMPH; SUS SCROFA LYMPH; BOS TAURUS MESENCHYME; SUS SCROFA MESENCHYME; STRYCHNOS NUX-VOMICA SEED; TARAXACUM OFFICINALE; BOS TAURUS THYMUS; SUS SCROFA THYMUS; BOS TAURUS TONSIL; SUS SCROFA TONSIL; THYROID, BOVINE; THYROID, PORCINE; ASCORBIC ACID; BERBERIS VULGARIS ROOT; ACTIVATED CHARCOAL; CENTAUREA BENEDICTA; MILK THISTLE; COLCHICUM AUTUMNALE BULB; GALIUM APARINE; BINETRAKIN; BEEF KIDNEY; PORK KIDNEY; BEEF LIVER",
"StrengthNumber": "31; 31; 31; 31; 201; 4; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 200; 200; 30; 201; 31; 31; 31; 7; 31; 201; 201; 201; 201",
"StrengthUnit": "[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Plant Proteins [CS],Seed Storage Proteins [CS],Vitamin C [EPC],Ascorbic Acid [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190506",
"SamplePackage": "N"
},
{
"NDCCode": "83634-776-10",
"PackageDescription": "1 VIAL in 1 CARTON (83634-776-10) / 5 mL in 1 VIAL",
"NDC11Code": "83634-0776-10",
"ProductNDC": "83634-776",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fosaprepitant",
"NonProprietaryName": "Fosaprepitant Dimeglumine",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212143",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "FOSAPREPITANT DIMEGLUMINE",
"StrengthNumber": "150",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240228",
"SamplePackage": "N",
"IndicationAndUsage": "Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: : 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin. , 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). .",
"Description": "Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol[3-[[(2R,3S)-2-[(1R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its empirical formula is C23H22F7N4O6P∙ 2(C7H17NO5) and its structural formula is:. Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose monohydrate (395 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment)."
},
{
"NDCCode": "83634-107-20",
"PackageDescription": "1 VIAL in 1 CARTON (83634-107-20) / 10 mL in 1 VIAL",
"NDC11Code": "83634-0107-20",
"ProductNDC": "83634-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Daptomycin",
"NonProprietaryName": "Daptomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212022",
"LabelerName": "Avenacy Inc.",
"SubstanceName": "DAPTOMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Lipopeptide Antibacterial [EPC], Lipopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20250115",
"SamplePackage": "N",
"IndicationAndUsage": "Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and, , 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis (1.2) , 3 Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3) .",
"Description": "Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine Ɛ1- lactone. The chemical structure is:. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, nonpyrogenic, preservative-free, pale yellow to light brown, lyophilized cake/powder containing approximately 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.7)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown."
},
{
"NDCCode": "83634-114-20",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (83634-114-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-114-41) ",
"NDC11Code": "83634-0114-20",
"ProductNDC": "83634-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "83634-115-30",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (83634-115-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-115-41) ",
"NDC11Code": "83634-0115-30",
"ProductNDC": "83634-115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "83634-116-30",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (83634-116-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-116-41) ",
"NDC11Code": "83634-0116-30",
"ProductNDC": "83634-116",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260815",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210274",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260815",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .",
"Description": "Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)]."
},
{
"NDCCode": "83634-205-50",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-205-50) / 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0205-50",
"ProductNDC": "83634-205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218644",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/25mL",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide ."
},
{
"NDCCode": "83634-206-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-206-51) / 50 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0206-51",
"ProductNDC": "83634-206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218644",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide ."
},
{
"NDCCode": "83634-207-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-207-51) / 100 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0207-51",
"ProductNDC": "83634-207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; ORAL",
"StartMarketingDate": "20260201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218644",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260201",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .",
"Description": "Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide ."
},
{
"NDCCode": "83634-305-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (83634-305-10) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "83634-0305-10",
"ProductNDC": "83634-305",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetazolamide",
"NonProprietaryName": "Acetazolamide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202693",
"LabelerName": "Avenacy, LLC",
"SubstanceName": "ACETAZOLAMIDE SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250831",
"SamplePackage": "N",
"IndicationAndUsage": "For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure. Acetazolamide is also indicated for the prevention or amelioration of symptoms associated with acute mountain sickness in climbers attempting rapid ascent and in those who are very susceptible to acute mountain sickness despite gradual ascent.",
"Description": "Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1, 3, 4-thiadiazol-2-yl)-acetamide and has the following chemical structure:. Acetazolamide is available for intravenous use, and is supplied as a sterile powder requiring reconstitution. Each vial contains an amount of acetazolamide sodium equivalent to 500 mg of acetazolamide. The bulk solution is adjusted to pH 9.6 using sodium hydroxide NF and, if necessary, hydrochloric acid NF prior to lyophilization."
},
{
"NDCCode": "0009-5190-03",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0009-5190-03) ",
"NDC11Code": "00009-5190-03",
"ProductNDC": "0009-5190",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Detrol La",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20000222",
"EndMarketingDate": "20241231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021228",
"LabelerName": "Pharmacia and Upjohn Company LLC",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20000222",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)].",
"Description": "DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7,. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone."
},
{
"NDCCode": "0009-5191-03",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0009-5191-03) ",
"NDC11Code": "00009-5191-03",
"ProductNDC": "0009-5191",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Detrol La",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20000222",
"EndMarketingDate": "20241231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021228",
"LabelerName": "Pharmacia and Upjohn Company LLC",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20000222",
"EndMarketingDatePackage": "20240630",
"SamplePackage": "N",
"IndicationAndUsage": "DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)].",
"Description": "DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7,. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone."
},
{
"NDCCode": "0054-0237-63",
"PackageDescription": "500 mL in 1 BOTTLE (0054-0237-63) ",
"NDC11Code": "00054-0237-63",
"ProductNDC": "0054-0237",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20080317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022195",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080317",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Oral Solution 2 mg/mL and 4 mg/mL is indicated for the management of: : 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). , 2 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine)., 3 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H21NO3)2H2SO4, and it has the following chemical structure."
},
{
"NDCCode": "0054-0238-63",
"PackageDescription": "500 mL in 1 BOTTLE (0054-0238-63) ",
"NDC11Code": "00054-0238-63",
"ProductNDC": "0054-0238",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20080317",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022195",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080317",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Oral Solution 2 mg/mL and 4 mg/mL is indicated for the management of: : 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). , 2 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine)., 3 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H21NO3)2H2SO4, and it has the following chemical structure."
},
{
"NDCCode": "0067-2045-83",
"PackageDescription": "1 BOTTLE in 1 CARTON (0067-2045-83) > 125 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "00067-2045-83",
"ProductNDC": "0067-2045",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Excedrin",
"ProprietaryNameSuffix": "Tension Headache",
"NonProprietaryName": "Acetaminophine, Caffeine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051031",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Novartis Consumer Health, Inc.",
"SubstanceName": "ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "500; 65",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-04-04"
},
{
"NDCCode": "0067-2053-83",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0067-2053-83) > 125 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "00067-2053-83",
"ProductNDC": "0067-2053",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Excedrin",
"ProprietaryNameSuffix": "Pm",
"NonProprietaryName": "Acetaminophen, Diphenhydramine Citrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100301",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Novartis Consumer Health, Inc.",
"SubstanceName": "ACETAMINOPHEN; DIPHENHYDRAMINE CITRATE",
"StrengthNumber": "500; 38",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-04-04"
},
{
"NDCCode": "0067-2055-83",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (0067-2055-83) > 125 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "00067-2055-83",
"ProductNDC": "0067-2055",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Excedrin",
"ProprietaryNameSuffix": "Pm",
"NonProprietaryName": "Acetaminophen, Diphenhydramine Citrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090701",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Novartis Consumer Health, Inc.",
"SubstanceName": "ACETAMINOPHEN; DIPHENHYDRAMINE CITRATE",
"StrengthNumber": "500; 38",
"StrengthUnit": "mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-04-04"
},
{
"NDCCode": "0069-3150-83",
"PackageDescription": "10 VIAL in 1 CARTON (0069-3150-83) / 5 mL in 1 VIAL (0069-3150-84) ",
"NDC11Code": "00069-3150-83",
"ProductNDC": "0069-3150",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zithromax",
"NonProprietaryName": "Azithromycin Dihydrate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050733",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970130",
"SamplePackage": "N",
"Description": "ZITHROMAX for injection (azithromycin for injection, USP) contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13- [(2,6-dideoxy-3-C-methyl-3-O -methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-hepta-methyl- 11- [[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa- 6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙ 2H2O and a molecular weight of 785. ZITHROMAX for injection (azithromycin for injection, USP) consists of azithromycin dihydrate and the following inactive ingredients: anhydrous citric acid and sodium hydroxide. Sodium hydroxide is added to adjust the pH. ZITHROMAX for injection (azithromycin for injection, USP) is supplied as white to off-white lyophilized powder in a single-dose vial for intravenous administration. Each vial contains azithromycin dihydrate equivalent to 500 mg of azithromycin, 384.6 mg anhydrous citric acid, and sodium hydroxide. Reconstitution, according to label directions, results in approximately 5 mL of ZITHROMAX for intravenous injection with each mL containing azithromycin dihydrate equivalent to 100 mg of azithromycin, 76.9 mg anhydrous citric acid, and sodium hydroxide."
},
{
"NDCCode": "0074-3173-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (0074-3173-90) ",
"NDC11Code": "00074-3173-90",
"ProductNDC": "0074-3173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tricor",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160205",
"EndMarketingDate": "20251130",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021656",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "48",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160205",
"EndMarketingDatePackage": "20251130",
"SamplePackage": "N",
"IndicationAndUsage": "TRICOR is indicated as adjunctive therapy to diet. to reduce triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL). to reduce elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy is not possible. Limitations of Use. Markedly elevated levels of serum TG (e.g. > 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate therapy on reducing this risk has not been determined [see Warnings and Precautions (5.7)]. Fenofibrate did not reduce coronary heart disease morbidity and mortality in two large, randomized controlled trials of patients with type 2 diabetes mellitus [see Warnings and Precautions (5.1) and Clinical Studies (14.4)].",
"Description": "TRICOR (fenofibrate) tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula:. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white solid which is stable under ordinary conditions. Inactive Ingredients. Each tablet contains crospovidone, docusate sodium, hypromellose 2910 (3 cps), lactose monohydrate, magnesium stearate, silicified microcrystalline cellulose, sodium lauryl sulfate, and sucrose. In addition, individual tablets contain:. 48 mg tablets. D&C Yellow #10 aluminum lake, FD&C Yellow #6 /sunset yellow FCF aluminum lake, FD&C Blue #2 /indigo carmine aluminum lake, polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum. 145 mg tablets. polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum."
},
{
"NDCCode": "0074-3189-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (0074-3189-90) ",
"NDC11Code": "00074-3189-90",
"ProductNDC": "0074-3189",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tricor",
"NonProprietaryName": "Fenofibrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160205",
"EndMarketingDate": "20260330",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021656",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "FENOFIBRATE",
"StrengthNumber": "145",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160205",
"EndMarketingDatePackage": "20260330",
"SamplePackage": "N",
"IndicationAndUsage": "TRICOR is indicated as adjunctive therapy to diet. to reduce triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL). to reduce elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy is not possible. Limitations of Use. Markedly elevated levels of serum TG (e.g. > 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate therapy on reducing this risk has not been determined [see Warnings and Precautions (5.7)]. Fenofibrate did not reduce coronary heart disease morbidity and mortality in two large, randomized controlled trials of patients with type 2 diabetes mellitus [see Warnings and Precautions (5.1) and Clinical Studies (14.4)].",
"Description": "TRICOR (fenofibrate) tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula:. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white solid which is stable under ordinary conditions. Inactive Ingredients. Each tablet contains crospovidone, docusate sodium, hypromellose 2910 (3 cps), lactose monohydrate, magnesium stearate, silicified microcrystalline cellulose, sodium lauryl sulfate, and sucrose. In addition, individual tablets contain:. 48 mg tablets. D&C Yellow #10 aluminum lake, FD&C Yellow #6 /sunset yellow FCF aluminum lake, FD&C Blue #2 /indigo carmine aluminum lake, polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum. 145 mg tablets. polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum."
},
{
"NDCCode": "0093-0018-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (0093-0018-05) ",
"NDC11Code": "00093-0018-05",
"ProductNDC": "0093-0018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077006",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2022-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151101",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "This product contains tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). It has the following structural formula. C26H37NO7 M.W. 475.6. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Each tolterodine tartrate tablet, for oral administration, contains 1 mg or 2 mg of tolterodine tartrate. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, and titanium dioxide."
},
{
"NDCCode": "0093-5060-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (0093-5060-05) ",
"NDC11Code": "00093-5060-05",
"ProductNDC": "0093-5060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088617",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130221",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21 H 27 ClN 2 O 2 · 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "0093-5061-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (0093-5061-05) ",
"NDC11Code": "00093-5061-05",
"ProductNDC": "0093-5061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121009",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088618",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121010",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21 H 27 ClN 2 O 2 · 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "0093-5062-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (0093-5062-05) ",
"NDC11Code": "00093-5062-05",
"ProductNDC": "0093-5062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088619",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121022",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21 H 27 ClN 2 O 2 · 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "0093-7163-05",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0093-7163-05) ",
"NDC11Code": "00093-7163-05",
"ProductNDC": "0093-7163",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079141",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate extended-release capsules are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)].",
"Description": "Tolterodine tartrate extended-release capsules contain Tolterodine Tartrate, USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of Tolterodine Tartrate, USP is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The structural formula of Tolterodine Tartrate, USP is. C26H37NO7 M.W. 475.6. Tolterodine Tartrate, USP is a white to creamy powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine Tartrate Extended-Release Capsules for oral administration contains 2 mg or 4 mg of Tolterodine Tartrate, USP. Inactive ingredients include: ethylcellulose, gelatin, hydroxypropyl cellulose, hypromellose, iron oxide black, propylene glycol, shellac glaze, sugar spheres (which contain sucrose and corn starch), titanium dioxide, and triethyl citrate. Additionally, the 2 mg strength contains D&C yellow 10 and FD&C green 3; the 4 mg strength contains brilliant blue FCF-FD&C blue 1."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>83634-500-83</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (83634-500-83) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0500-83</NDC11Code>
<ProductNDC>83634-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>83634-500-81</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (83634-500-81) / 1 BAG in 1 POUCH (83634-500-41) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0500-81</NDC11Code>
<ProductNDC>83634-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>83634-500-82</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (83634-500-82) / 1 BAG in 1 POUCH (83634-500-42) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>83634-0500-82</NDC11Code>
<ProductNDC>83634-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate In Water</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate In Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209642</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate in Water for Injection is indicated for the prevention and control of seizures in preeclampsia and eclampsia, respectively. When used judiciously it effectively prevents and controls the convulsions of eclampsia without producing deleterious depression of the central nervous system of the mother or infant. However, other effective drugs are available for this purpose.</IndicationAndUsage>
<Description>Magnesium Sulfate in Water for Injection is a sterile, nonpyrogenic solution of magnesium sulfate heptahydrate in water for injection. May contain sulfuric acid and/or sodium hydroxide for pH adjustment. The pH is 4.5 (3.5 to 6.5). It is available in 4% and 8% concentrations. See HOW SUPPLIED section for the content and characteristics of available dosage forms and sizes. Magnesium Sulfate, USP heptahydrate is chemically designated MgSO47H2O, colorless crystals or white powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is free of polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period.</Description>
</NDC>
<NDC>
<NDCCode>0395-8102-83</NDCCode>
<PackageDescription>500 mg in 1 CONTAINER (0395-8102-83) </PackageDescription>
<NDC11Code>00395-8102-83</NDC11Code>
<ProductNDC>0395-8102</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20180710</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Humco Holding Group, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-JUL-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>57664-500-83</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (57664-500-83) </PackageDescription>
<NDC11Code>57664-0500-83</NDC11Code>
<ProductNDC>57664-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076541</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Mirtazapine tablets contain mirtazapine, USP. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro- 2-methylpyrazino [2,1-a] pyrido [2,3-c] [2] benzazepine and has the empirical formula of C17H19N3. Its molecular weight is 265.35. The structural formula is the following and it is the racemic mixture. Mirtazapine, USP is a white to creamy white crystalline powder which is practically insoluble in water. Mirtazapine tablets, USP are available for oral administration as scored film-coated tablets containing 15 mg or 30 mg of mirtazapine, USP, and unscored film-coated tablets containing 7.5 mg or 45 mg of mirtazapine, USP. Each tablet contains colloidal silicon dioxide, corn starch, hydroxypropyl cellulose, hypromellose 2910, lactose monohydrate, magnesium stearate, pregelatinized starch, and titanium dioxide. The 7.5 mg and 15 mg tablets also contains iron oxide (yellow) and the 30 mg tablets also contains iron oxides (yellow, red and black).</Description>
</NDC>
<NDC>
<NDCCode>73069-500-83</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 BOX (73069-500-83) > 100 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>73069-0500-83</NDC11Code>
<ProductNDC>73069-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viatrexx-systemic Detox</ProprietaryName>
<NonProprietaryName>Adrenal Gland, .alpha.-ketoglutaric Acid, .alpha.-lipoic Acid, Pork Liver, Lycopodium Clavatum Spore, Lymph, Mesenchyme, Strychnos Nux-vomica Seed , Taraxacum Officinale, Thymus, Tonsil, Thyroid, Ascorbic Acid, Berberis Vulgaris Root, Activated Charcoal, Centaurea Benedicta, Milk Thistle, Colchicum Autumnale Bulb, Galium Aparine, Binetrakin, Kidney, Beef Liver</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; PARENTERAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>VIATREXX BIO INCORPORATED</LabelerName>
<SubstanceName>BOS TAURUS ADRENAL GLAND; SUS SCROFA ADRENAL GLAND; .ALPHA.-KETOGLUTARIC ACID; .ALPHA.-LIPOIC ACID; PORK LIVER; LYCOPODIUM CLAVATUM SPORE; BOS TAURUS LYMPH; SUS SCROFA LYMPH; BOS TAURUS MESENCHYME; SUS SCROFA MESENCHYME; STRYCHNOS NUX-VOMICA SEED; TARAXACUM OFFICINALE; BOS TAURUS THYMUS; SUS SCROFA THYMUS; BOS TAURUS TONSIL; SUS SCROFA TONSIL; THYROID, BOVINE; THYROID, PORCINE; ASCORBIC ACID; BERBERIS VULGARIS ROOT; ACTIVATED CHARCOAL; CENTAUREA BENEDICTA; MILK THISTLE; COLCHICUM AUTUMNALE BULB; GALIUM APARINE; BINETRAKIN; BEEF KIDNEY; PORK KIDNEY; BEEF LIVER</SubstanceName>
<StrengthNumber>31; 31; 31; 31; 201; 4; 201; 201; 201; 201; 201; 201; 201; 201; 201; 201; 200; 200; 30; 201; 31; 31; 31; 7; 31; 201; 201; 201; 201</StrengthNumber>
<StrengthUnit>[kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL; [kp_C]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Meat Proteins [EXT],Non-Standardized Plant Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Plant Proteins [CS],Seed Storage Proteins [CS],Vitamin C [EPC],Ascorbic Acid [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>83634-776-10</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (83634-776-10) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>83634-0776-10</NDC11Code>
<ProductNDC>83634-776</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fosaprepitant</ProprietaryName>
<NonProprietaryName>Fosaprepitant Dimeglumine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240228</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212143</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>FOSAPREPITANT DIMEGLUMINE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: : 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin. , 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). .</IndicationAndUsage>
<Description>Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol[3-[[(2R,3S)-2-[(1R)-1-[3,5-bis(trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its empirical formula is C23H22F7N4O6P∙ 2(C7H17NO5) and its structural formula is:. Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (5.4 mg), polysorbate 80 (75 mg), lactose monohydrate (395 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment).</Description>
</NDC>
<NDC>
<NDCCode>83634-107-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (83634-107-20) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>83634-0107-20</NDC11Code>
<ProductNDC>83634-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Daptomycin</ProprietaryName>
<NonProprietaryName>Daptomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212022</ApplicationNumber>
<LabelerName>Avenacy Inc.</LabelerName>
<SubstanceName>DAPTOMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Lipopeptide Antibacterial [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Daptomycin for Injection is a lipopeptide antibacterial indicated for the treatment of: : 1 Complicated skin and skin structure infections (cSSSI) in adult and pediatric patients (1 to 17 years of age) (1.1) and, , 2 Staphylococcus aureus bloodstream infections (bacteremia), in adult patients including those with right-sided infective endocarditis (1.2) , 3 Staphylococcus aureus bloodstream infections (bacteremia) in pediatric patients (1 to 17 years of age). (1.3) .</IndicationAndUsage>
<Description>Daptomycin for Injection contains daptomycin, a cyclic lipopeptide antibacterial agent derived from the fermentation of Streptomyces roseosporus. The chemical name is N-decanoyl-L-tryptophyl-D-asparaginyl-L-aspartyl-L-threonylglycyl-L-ornithyl-L-aspartyl-D-alanyl-L-aspartylglycyl-D-seryl-threo-3-methyl-L-glutamyl-3-anthraniloyl-L-alanine Ɛ1- lactone. The chemical structure is:. The empirical formula is C72H101N17O26; the molecular weight is 1620.67. Daptomycin for Injection is supplied in a single-dose vial as a sterile, nonpyrogenic, preservative-free, pale yellow to light brown, lyophilized cake/powder containing approximately 500 mg of daptomycin for intravenous (IV) use following reconstitution with 0.9% sodium chloride injection [see Dosage and Administration (2.7)]. The only inactive ingredient is sodium hydroxide, which is used for pH adjustment. Freshly reconstituted solutions of Daptomycin for Injection range in color from pale yellow to light brown.</Description>
</NDC>
<NDC>
<NDCCode>83634-114-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (83634-114-20) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-114-41) </PackageDescription>
<NDC11Code>83634-0114-20</NDC11Code>
<ProductNDC>83634-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>83634-115-30</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (83634-115-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-115-41) </PackageDescription>
<NDC11Code>83634-0115-30</NDC11Code>
<ProductNDC>83634-115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>83634-116-30</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (83634-116-30) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (83634-116-41) </PackageDescription>
<NDC11Code>83634-0116-30</NDC11Code>
<ProductNDC>83634-116</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260815</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210274</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection is a glycopeptide antibacterial indicated in adult and pediatric patients less than 18 years of age as follows: : 1 Vancomycin Hydrochloride for Injection administered intravenously is indicated for the treatment of:Septicemia (1.1) Infective Endocarditis (1.2) Skin and Skin Structure Infections (1.3) Bone Infections (1.4) Lower Respiratory Tract Infections (1.5) , 2 Vancomycin Hydrochloride for Injection administered orally is indicated for the treatment of:Clostridioides difficile-associated diarrhea (1.6) Enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) (1.7) .</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection contains the hydrochloride salt of vancomycin, a tricyclic glycopeptide antibacterial derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is (Sa)-(3S,6R,7R,22R,23S, 26S,36R,38aR)-44-[[2-O-(3-Amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-3-(carbamoylmethyl)-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[(2R)-4-methyl-2-(methylamino)valeramido]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.71. Vancomycin hydrochloride has the following structural formula:. Vancomycin Hydrochloride for Injection is a sterile, preservative-free, white, almost white to tan to brown, spray-dried powder, for preparing intravenous (IV) infusions, in single-dose vials each containing the equivalent of 500 mg, 750 mg, 1 gram, 1.25 grams or 1.5 grams vancomycin base. Each 500 mg vial contains 500 mg vancomycin (equivalent to 513 mg vancomycin hydrochloride), 125 mg trehalose, 0.05 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 750 mg vial contains 750 mg vancomycin (equivalent to 769 mg vancomycin hydrochloride), 187.5 mg trehalose, 0.075 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1 gram vial contains 1 gram vancomycin (equivalent to 1.025 grams vancomycin hydrochloride), 250 mg trehalose, 0.1 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.25 gram vial contains 1.25 grams vancomycin (equivalent to 1.28 grams vancomycin hydrochloride), 312.5 mg trehalose, 0.125 mg polysorbate 80, and hydrochloric acid used to adjust the pH. Each 1.5 gram vial contains 1.5 grams vancomycin (equivalent to 1.54 grams vancomycin hydrochloride), 375 mg trehalose, 0.15 mg polysorbate 80, and hydrochloric acid used to adjust the pH. The spray-dried powder is reconstituted with Sterile Water for Injection which forms a clear solution and subsequently diluted prior to intravenous or oral administration [see Dosage and Administration (2.5, 2.8)]. Vancomycin Hydrochloride for Injection may also be diluted with a sweetening agent for oral administration [see Dosage and Administration (2.8)].</Description>
</NDC>
<NDC>
<NDCCode>83634-205-50</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-205-50) / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0205-50</NDC11Code>
<ProductNDC>83634-205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218644</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide .</Description>
</NDC>
<NDC>
<NDCCode>83634-206-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-206-51) / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0206-51</NDC11Code>
<ProductNDC>83634-206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218644</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide .</Description>
</NDC>
<NDC>
<NDCCode>83634-207-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-207-51) / 100 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0207-51</NDC11Code>
<ProductNDC>83634-207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20260201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218644</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclophosphamide for Injection is an alkylating drug indicated for treatment of adults and pediatric patients with: : 1 Malignant Diseases: malignant lymphomas: Hodgkin's disease, lymphocytic lymphoma, mixed-cell type lymphoma, histiocytic lymphoma, Burkitt's lymphoma; multiple myeloma, leukemias, mycosis fungoides, neuroblastoma, adenocarcinoma of ovary, retinoblastoma, breast carcinoma (1.1) , 2 Minimal Change Nephrotic Syndrome in Pediatric Patients: biopsy proven minimal change nephrotic syndrome patients who failed to adequately respond to or are unable to tolerate adrenocorticosteroid therapy (1.2) .</IndicationAndUsage>
<Description>Cyclophosphamide is an alkylating drug. It is an antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula:. Cyclophosphamide has a molecular formula of C7H15Cl2N2O2PH2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline, or ethanol. Cyclophosphamide for Injection, USP is a sterile white crystal or crystalline powder available as 500 mg, 1 gram, and 2 gram strength single-dose vials. : 1 500 mg vial contains 534.5 mg cyclophosphamide monohydrate equivalent to 500 mg cyclophosphamide , 2 1 gram vial contains 1,069 mg cyclophosphamide monohydrate equivalent to 1 gram cyclophosphamide , 3 2 gram vial contains 2,138 mg cyclophosphamide monohydrate equivalent to 2 grams cyclophosphamide .</Description>
</NDC>
<NDC>
<NDCCode>83634-305-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (83634-305-10) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>83634-0305-10</NDC11Code>
<ProductNDC>83634-305</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetazolamide</ProprietaryName>
<NonProprietaryName>Acetazolamide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250831</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202693</ApplicationNumber>
<LabelerName>Avenacy, LLC</LabelerName>
<SubstanceName>ACETAZOLAMIDE SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], Sulfonamides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For adjunctive treatment of: edema due to congestive heart failure; drug-induced edema; centrencephalic epilepsies (petit mal, unlocalized seizures); chronic simple (open-angle) glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where delay of surgery is desired in order to lower intraocular pressure. Acetazolamide is also indicated for the prevention or amelioration of symptoms associated with acute mountain sickness in climbers attempting rapid ascent and in those who are very susceptible to acute mountain sickness despite gradual ascent.</IndicationAndUsage>
<Description>Acetazolamide, an inhibitor of the enzyme carbonic anhydrase, is a white to faintly yellowish white crystalline, odorless powder, weakly acidic, very slightly soluble in water and slightly soluble in alcohol. The chemical name for acetazolamide is N-(5-Sulfamoyl-1, 3, 4-thiadiazol-2-yl)-acetamide and has the following chemical structure:. Acetazolamide is available for intravenous use, and is supplied as a sterile powder requiring reconstitution. Each vial contains an amount of acetazolamide sodium equivalent to 500 mg of acetazolamide. The bulk solution is adjusted to pH 9.6 using sodium hydroxide NF and, if necessary, hydrochloric acid NF prior to lyophilization.</Description>
</NDC>
<NDC>
<NDCCode>0009-5190-03</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0009-5190-03) </PackageDescription>
<NDC11Code>00009-5190-03</NDC11Code>
<ProductNDC>0009-5190</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Detrol La</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000222</StartMarketingDate>
<EndMarketingDate>20241231</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021228</ApplicationNumber>
<LabelerName>Pharmacia and Upjohn Company LLC</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20000222</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)].</IndicationAndUsage>
<Description>DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7,. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>0009-5191-03</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0009-5191-03) </PackageDescription>
<NDC11Code>00009-5191-03</NDC11Code>
<ProductNDC>0009-5191</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Detrol La</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000222</StartMarketingDate>
<EndMarketingDate>20241231</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021228</ApplicationNumber>
<LabelerName>Pharmacia and Upjohn Company LLC</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20000222</StartMarketingDatePackage>
<EndMarketingDatePackage>20240630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DETROL LA Capsules is indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)].</IndicationAndUsage>
<Description>DETROL LA Capsules contain tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The empirical formula of tolterodine tartrate is C26H37NO7,. Its structure is. Tolterodine tartrate is a white, crystalline powder with a molecular weight of 475.6. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. DETROL LA 4 mg capsule for oral administration contains 4 mg of tolterodine tartrate. Inactive ingredients are sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, and FD&C Blue #2. DETROL LA 2 mg capsule for oral administration contains 2 mg of tolterodine tartrate, and the following inactive ingredients: sucrose, starch, hypromellose, ethylcellulose, medium chain triglycerides, oleic acid, gelatin, yellow iron oxide, and FD&C Blue #2. Both the 2 mg and 4 mg capsule strengths are imprinted with a pharmaceutical grade printing ink that contains shellac glaze, titanium dioxide, propylene glycol, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>0054-0237-63</NDCCode>
<PackageDescription>500 mL in 1 BOTTLE (0054-0237-63) </PackageDescription>
<NDC11Code>00054-0237-63</NDC11Code>
<ProductNDC>0054-0237</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022195</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Oral Solution 2 mg/mL and 4 mg/mL is indicated for the management of: : 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). , 2 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine)., 3 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H21NO3)2H2SO4, and it has the following chemical structure.</Description>
</NDC>
<NDC>
<NDCCode>0054-0238-63</NDCCode>
<PackageDescription>500 mL in 1 BOTTLE (0054-0238-63) </PackageDescription>
<NDC11Code>00054-0238-63</NDC11Code>
<ProductNDC>0054-0238</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080317</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022195</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Oral Solution 2 mg/mL and 4 mg/mL is indicated for the management of: : 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. , 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine). , 2 20 mg per 5 mL (4 mg/mL): Each 1 mL of oral solution contains 4 mg of morphine sulfate, USP (equivalent to 3 mg morphine)., 3 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).The chemical name is 7,8-didehydro-4,5 alpha-epoxy-17 methyl-morphinan-3,6 alpha-diol sulfate (2:1) (salt) pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H21NO3)2H2SO4, and it has the following chemical structure.</Description>
</NDC>
<NDC>
<NDCCode>0067-2045-83</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0067-2045-83) > 125 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00067-2045-83</NDC11Code>
<ProductNDC>0067-2045</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Excedrin</ProprietaryName>
<ProprietaryNameSuffix>Tension Headache</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophine, Caffeine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051031</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Novartis Consumer Health, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>500; 65</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-04-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>0067-2053-83</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0067-2053-83) > 125 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00067-2053-83</NDC11Code>
<ProductNDC>0067-2053</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Excedrin</ProprietaryName>
<ProprietaryNameSuffix>Pm</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Diphenhydramine Citrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Novartis Consumer Health, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DIPHENHYDRAMINE CITRATE</SubstanceName>
<StrengthNumber>500; 38</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-04-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>0067-2055-83</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (0067-2055-83) > 125 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00067-2055-83</NDC11Code>
<ProductNDC>0067-2055</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Excedrin</ProprietaryName>
<ProprietaryNameSuffix>Pm</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Diphenhydramine Citrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090701</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Novartis Consumer Health, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; DIPHENHYDRAMINE CITRATE</SubstanceName>
<StrengthNumber>500; 38</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-04-04</LastUpdate>
</NDC>
<NDC>
<NDCCode>0069-3150-83</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0069-3150-83) / 5 mL in 1 VIAL (0069-3150-84) </PackageDescription>
<NDC11Code>00069-3150-83</NDC11Code>
<ProductNDC>0069-3150</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zithromax</ProprietaryName>
<NonProprietaryName>Azithromycin Dihydrate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970130</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050733</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>ZITHROMAX for injection (azithromycin for injection, USP) contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13- [(2,6-dideoxy-3-C-methyl-3-O -methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-hepta-methyl- 11- [[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa- 6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O12∙ 2H2O and a molecular weight of 785. ZITHROMAX for injection (azithromycin for injection, USP) consists of azithromycin dihydrate and the following inactive ingredients: anhydrous citric acid and sodium hydroxide. Sodium hydroxide is added to adjust the pH. ZITHROMAX for injection (azithromycin for injection, USP) is supplied as white to off-white lyophilized powder in a single-dose vial for intravenous administration. Each vial contains azithromycin dihydrate equivalent to 500 mg of azithromycin, 384.6 mg anhydrous citric acid, and sodium hydroxide. Reconstitution, according to label directions, results in approximately 5 mL of ZITHROMAX for intravenous injection with each mL containing azithromycin dihydrate equivalent to 100 mg of azithromycin, 76.9 mg anhydrous citric acid, and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0074-3173-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (0074-3173-90) </PackageDescription>
<NDC11Code>00074-3173-90</NDC11Code>
<ProductNDC>0074-3173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tricor</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160205</StartMarketingDate>
<EndMarketingDate>20251130</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021656</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>48</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160205</StartMarketingDatePackage>
<EndMarketingDatePackage>20251130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRICOR is indicated as adjunctive therapy to diet. to reduce triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL). to reduce elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy is not possible. Limitations of Use. Markedly elevated levels of serum TG (e.g. > 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate therapy on reducing this risk has not been determined [see Warnings and Precautions (5.7)]. Fenofibrate did not reduce coronary heart disease morbidity and mortality in two large, randomized controlled trials of patients with type 2 diabetes mellitus [see Warnings and Precautions (5.1) and Clinical Studies (14.4)].</IndicationAndUsage>
<Description>TRICOR (fenofibrate) tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula:. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white solid which is stable under ordinary conditions. Inactive Ingredients. Each tablet contains crospovidone, docusate sodium, hypromellose 2910 (3 cps), lactose monohydrate, magnesium stearate, silicified microcrystalline cellulose, sodium lauryl sulfate, and sucrose. In addition, individual tablets contain:. 48 mg tablets. D&C Yellow #10 aluminum lake, FD&C Yellow #6 /sunset yellow FCF aluminum lake, FD&C Blue #2 /indigo carmine aluminum lake, polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum. 145 mg tablets. polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>0074-3189-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (0074-3189-90) </PackageDescription>
<NDC11Code>00074-3189-90</NDC11Code>
<ProductNDC>0074-3189</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tricor</ProprietaryName>
<NonProprietaryName>Fenofibrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160205</StartMarketingDate>
<EndMarketingDate>20260330</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021656</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>FENOFIBRATE</SubstanceName>
<StrengthNumber>145</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160205</StartMarketingDatePackage>
<EndMarketingDatePackage>20260330</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRICOR is indicated as adjunctive therapy to diet. to reduce triglyceride (TG) levels in adults with severe hypertriglyceridemia (TG greater than or equal to 500 mg/dL). to reduce elevated low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia when use of recommended LDL-C lowering therapy is not possible. Limitations of Use. Markedly elevated levels of serum TG (e.g. > 2,000 mg/dL) may increase the risk of developing pancreatitis. The effect of fenofibrate therapy on reducing this risk has not been determined [see Warnings and Precautions (5.7)]. Fenofibrate did not reduce coronary heart disease morbidity and mortality in two large, randomized controlled trials of patients with type 2 diabetes mellitus [see Warnings and Precautions (5.1) and Clinical Studies (14.4)].</IndicationAndUsage>
<Description>TRICOR (fenofibrate) tablets is a peroxisome proliferator-activated receptor (PPAR) alpha agonist available as tablets for oral administration. Each tablet contains 48 mg or 145 mg of fenofibrate. The chemical name for fenofibrate is 2-[4-(4-chlorobenzoyl) phenoxy]-2-methyl-propanoic acid, 1-methylethyl ester with the following structural formula:. The empirical formula is C20H21O4Cl and the molecular weight is 360.83; fenofibrate is insoluble in water. The melting point is 79 to 82°C. Fenofibrate is a white solid which is stable under ordinary conditions. Inactive Ingredients. Each tablet contains crospovidone, docusate sodium, hypromellose 2910 (3 cps), lactose monohydrate, magnesium stearate, silicified microcrystalline cellulose, sodium lauryl sulfate, and sucrose. In addition, individual tablets contain:. 48 mg tablets. D&C Yellow #10 aluminum lake, FD&C Yellow #6 /sunset yellow FCF aluminum lake, FD&C Blue #2 /indigo carmine aluminum lake, polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum. 145 mg tablets. polyvinyl alcohol, soybean lecithin, talc, titanium dioxide, xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>0093-0018-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (0093-0018-05) </PackageDescription>
<NDC11Code>00093-0018-05</NDC11Code>
<ProductNDC>0093-0018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077006</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>This product contains tolterodine tartrate. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). It has the following structural formula. C26H37NO7 M.W. 475.6. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Each tolterodine tartrate tablet, for oral administration, contains 1 mg or 2 mg of tolterodine tartrate. In addition, each tablet contains the following inactive ingredients: corn starch, croscarmellose sodium, hypromellose, lactose monohydrate, microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0093-5060-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (0093-5060-05) </PackageDescription>
<NDC11Code>00093-5060-05</NDC11Code>
<ProductNDC>0093-5060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088617</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21 H 27 ClN 2 O 2 · 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>0093-5061-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (0093-5061-05) </PackageDescription>
<NDC11Code>00093-5061-05</NDC11Code>
<ProductNDC>0093-5061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121009</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088618</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21 H 27 ClN 2 O 2 · 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>0093-5062-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (0093-5062-05) </PackageDescription>
<NDC11Code>00093-5062-05</NDC11Code>
<ProductNDC>0093-5062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088619</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride, USP has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy] ethanol dihydrochloride. C 21 H 27 ClN 2 O 2 · 2HCl M.W. 447.83. Hydroxyzine hydrochloride, USP occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydroxyzine hydrochloride, USP. Inactive ingredients include anhydrous lactose, carnauba wax, colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>0093-7163-05</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0093-7163-05) </PackageDescription>
<NDC11Code>00093-7163-05</NDC11Code>
<ProductNDC>0093-7163</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079141</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate extended-release capsules are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency [see CLINICAL STUDIES (14)].</IndicationAndUsage>
<Description>Tolterodine tartrate extended-release capsules contain Tolterodine Tartrate, USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of Tolterodine Tartrate, USP is (R)-N,N-diisopropyl-3-(2-hydroxy-5-methylphenyl)-3-phenylpropanamine L-hydrogen tartrate. The structural formula of Tolterodine Tartrate, USP is. C26H37NO7 M.W. 475.6. Tolterodine Tartrate, USP is a white to creamy powder. The pKa value is 9.87 and the solubility in water is 12 mg/mL. It is soluble in methanol, slightly soluble in ethanol, and practically insoluble in toluene. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine Tartrate Extended-Release Capsules for oral administration contains 2 mg or 4 mg of Tolterodine Tartrate, USP. Inactive ingredients include: ethylcellulose, gelatin, hydroxypropyl cellulose, hypromellose, iron oxide black, propylene glycol, shellac glaze, sugar spheres (which contain sucrose and corn starch), titanium dioxide, and triethyl citrate. Additionally, the 2 mg strength contains D&C yellow 10 and FD&C green 3; the 4 mg strength contains brilliant blue FCF-FD&C blue 1.</Description>
</NDC>
</NDCList>