{
"NDC": [
{
"NDCCode": "83854-011-27",
"PackageDescription": "25 VIAL in 1 CARTON (83854-011-27) / 30 mL in 1 VIAL (83854-011-03) ",
"NDC11Code": "83854-0011-27",
"ProductNDC": "83854-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251002",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "83854-011-25",
"PackageDescription": "25 VIAL in 1 CARTON (83854-011-25) / 2 mL in 1 VIAL (83854-011-01) ",
"NDC11Code": "83854-0011-25",
"ProductNDC": "83854-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251015",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "83854-011-26",
"PackageDescription": "25 VIAL in 1 CARTON (83854-011-26) / 5 mL in 1 VIAL (83854-011-02) ",
"NDC11Code": "83854-0011-26",
"ProductNDC": "83854-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251002",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "83854-009-27",
"PackageDescription": "25 VIAL in 1 CARTON (83854-009-27) / 10 mL in 1 VIAL (83854-009-03) ",
"NDC11Code": "83854-0009-27",
"ProductNDC": "83854-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251229",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "83854-010-27",
"PackageDescription": "25 VIAL in 1 CARTON (83854-010-27) / 50 mL in 1 VIAL (83854-010-03) ",
"NDC11Code": "83854-0010-27",
"ProductNDC": "83854-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260206",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "25000-011-27",
"PackageDescription": "4 BAG in 1 BOX (25000-011-27) / 2500 CAPSULE, LIQUID FILLED in 1 BAG",
"NDC11Code": "25000-0011-27",
"ProductNDC": "25000-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dutasteride",
"NonProprietaryName": "Dutasteride",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20170427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204376",
"LabelerName": "MARKSANS PHARMA LIMITED",
"SubstanceName": "DUTASTERIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170427",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Monotherapy. Dutasteride Capsulesare indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to. · improve symptoms. · reduce the risk of acute urinary retention (AUR), and. · reduce the risk of the need for BPH-related surgery. 1.2 Combination with Alpha-adrenergic Antagonist. Dutasteride Capsules in combination with the alpha-adrenergic antagonist, tamsulosin, is indicated for the treatment of symptomatic BPH in men with an enlarged prostate. 1.3 Limitations of Use. Dutasteride Capsules are not approved for the prevention of prostate cancer.",
"Description": "Dutasteride is a synthetic 4-azasteroid compound that is a selective inhibitor of both the type 1 and type 2 isoforms of steroid 5 alpha-reductase, an intracellular enzyme that converts testosterone to DHT. Dutasteride is chemically designated as (5α,17β)-N-{2,5 bis(trifluoromethyl)phenyl}-3-oxo-4-azaandrost-1-ene-17-carboxamide. The empirical formula of dutasteride is C27H30F6N2O2, representing a molecular weight of 528.5 with the following structural formula. Dutasteride is a white to pale yellow powder with a melting point of 242° to 250°C. It is soluble in ethanol (44 mg/mL), methanol (64 mg/mL), and polyethylene glycol 400 (3 mg/mL), but it is insoluble in water. Each Dutasteride Capsule, administered orally, contains 0.5 mg of dutasteride dissolved in a mixture of mono and di-glycerides of caprylic/capric acid and butylated hydroxytoluene. The inactive excipients in the capsule shell are colour iron oxide yellow, gelatin, glycerin, non crystallizing Sorbitol solution, titanium dioxide and purified water. The soft gelatin capsules are printed with edible black ink Opacode Black (S-1-17823).(Containing- Isopropyl alcohol, Shellac Glaze, Black iron oxide, N-butyl alcohol, Propylene glycol, and Ammonium hydroxide)."
},
{
"NDCCode": "42659-011-27",
"PackageDescription": "1000 mL in 1 BOTTLE (42659-011-27)",
"NDC11Code": "42659-0011-27",
"ProductNDC": "42659-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Plum Emergency Eyewash/eyewash Duo/eyewash Shower Iss Usa",
"NonProprietaryName": "Water",
"DosageFormName": "LIQUID",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20160617",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part349",
"LabelerName": "Plum A/S",
"SubstanceName": "WATER",
"StrengthNumber": "99.1",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For rinsing the eyes and skin to reduce risk of severe injury caused by chemicals or particulate contamination."
},
{
"NDCCode": "44397-011-27",
"PackageDescription": "164.5 L in 1 CYLINDER (44397-011-27)",
"NDC11Code": "44397-0011-27",
"ProductNDC": "44397-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrogen",
"NonProprietaryName": "Nitrogen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19740101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205891",
"LabelerName": "Argyle Welding Supply Company, Inc.",
"SubstanceName": "NITROGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "52086-011-27",
"PackageDescription": "6800 L in 1 CYLINDER (52086-011-27) ",
"NDC11Code": "52086-0011-27",
"ProductNDC": "52086-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19830908",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205889",
"LabelerName": "Helget Gas Products",
"SubstanceName": "OXYGEN",
"StrengthNumber": "999",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830908",
"SamplePackage": "N"
},
{
"NDCCode": "52584-011-15",
"PackageDescription": "1 VIAL in 1 BAG (52584-011-15) > 133.27 mg in 1 VIAL",
"NDC11Code": "52584-0011-15",
"ProductNDC": "52584-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chloramphenicol Sodium Succinate",
"NonProprietaryName": "Chloramphenicol Sodium Succinate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062365",
"LabelerName": "General Injectables and Vaccines, Inc",
"SubstanceName": "CHLORAMPHENICOL SODIUM SUCCINATE",
"StrengthNumber": "133.27",
"StrengthUnit": "mg/133.27mg",
"Pharm_Classes": "Amphenicol-class Antibacterial [EPC],Amphenicols [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-02-07"
},
{
"NDCCode": "71282-011-27",
"PackageDescription": "2 TUBE in 1 PACKAGE (71282-011-27) / 100 g in 1 TUBE",
"NDC11Code": "71282-0011-27",
"ProductNDC": "71282-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "4jointz",
"NonProprietaryName": "Menthol",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170131",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "ARP(USA) Pty Ltd",
"SubstanceName": "MENTHOL",
"StrengthNumber": "1.5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170131",
"SamplePackage": "N",
"IndicationAndUsage": "Uses Temporarily relieves the aches and pains of muscles and joints associated with. ■ arthritis ■ simple backache ■ strains ■ bruises ■ sprains."
},
{
"NDCCode": "74761-011-27",
"PackageDescription": "600 mL in 1 BOTTLE (74761-011-27) ",
"NDC11Code": "74761-0011-27",
"ProductNDC": "74761-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial Hand Sanitizer",
"NonProprietaryName": "Antibacterial Hand Sanitizer",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200419",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Guangzhou Oumiao Cosmetics Co. Ltd. ",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200419",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria on skin."
},
{
"NDCCode": "79959-011-01",
"PackageDescription": "1 TUBE in 1 CARTON (79959-011-01) / 27.168 g in 1 TUBE",
"NDC11Code": "79959-0011-01",
"ProductNDC": "79959-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ulta All Clear Serum",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M006",
"LabelerName": "APR BEAUTY GROUP INC",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "20",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2024-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N"
},
{
"NDCCode": "84003-011-00",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (84003-011-00) / 27 mL in 1 BOTTLE, PUMP",
"NDC11Code": "84003-0011-00",
"ProductNDC": "84003-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dolce And Gabbana Everlast Foundation Spf 20 11w Light Medium",
"NonProprietaryName": "Octisalate, Octocrylene, Titanium Dioxide, Zinc Oxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Dolce & Gabbana Beauty S.R.L",
"SubstanceName": "OCTISALATE; OCTOCRYLENE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "35; 50; 5; 18.8",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2025-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn . If uses directed with others sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "84003-011-01",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (84003-011-01) / 27 mL in 1 BOTTLE, PUMP",
"NDC11Code": "84003-0011-01",
"ProductNDC": "84003-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dolce And Gabbana Everlast Foundation Spf 20 11w Light Medium",
"NonProprietaryName": "Octisalate, Octocrylene, Titanium Dioxide, Zinc Oxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Dolce & Gabbana Beauty S.R.L",
"SubstanceName": "OCTISALATE; OCTOCRYLENE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "35; 50; 5; 18.8",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2025-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "Y",
"IndicationAndUsage": "Helps prevent sunburn . If uses directed with others sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. ."
},
{
"NDCCode": "87022-011-27",
"PackageDescription": "473 mL in 1 BOTTLE (87022-011-27) ",
"NDC11Code": "87022-0011-27",
"ProductNDC": "87022-011",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aromatica Hair Champu",
"NonProprietaryName": "Minoxidil",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250926",
"EndMarketingDate": "20270926",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "LABORATORIO MK SRL",
"SubstanceName": "MINOXIDIL",
"StrengthNumber": "2",
"StrengthUnit": "mg/473mL",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250926",
"EndMarketingDatePackage": "20270926",
"SamplePackage": "Y",
"IndicationAndUsage": "Apply to wet hair, lather and rinse, repeat if necessary."
},
{
"NDCCode": "83854-002-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-002-10) / 20 mL in 1 VIAL (83854-002-01) ",
"NDC11Code": "83854-0002-10",
"ProductNDC": "83854-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220268",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260121",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide injection is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older( 1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older ( 1.2) .",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-Nbenzyl- 3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "83854-017-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-017-10) / 4 mL in 1 VIAL (83854-017-01) ",
"NDC11Code": "83854-0017-10",
"ProductNDC": "83854-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norepinephrine Bitartrate",
"NonProprietaryName": "Norepinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219924",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "NOREPINEPHRINE BITARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251125",
"SamplePackage": "N",
"IndicationAndUsage": "Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.",
"Description": "Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is Freely soluble in water, slightly soluble in alcohol, practically insoluble in chloroform and ether. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg (vials) of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas."
},
{
"NDCCode": "83854-018-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-018-10) / 20 mL in 1 VIAL (83854-018-01) ",
"NDC11Code": "83854-0018-10",
"ProductNDC": "83854-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220857",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260714",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5."
},
{
"NDCCode": "83854-018-14",
"PackageDescription": "20 VIAL in 1 CARTON (83854-018-14) / 20 mL in 1 VIAL (83854-018-01) ",
"NDC11Code": "83854-0018-14",
"ProductNDC": "83854-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220857",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260910",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5."
},
{
"NDCCode": "83854-018-15",
"PackageDescription": "25 VIAL in 1 CARTON (83854-018-15) / 20 mL in 1 VIAL (83854-018-01) ",
"NDC11Code": "83854-0018-15",
"ProductNDC": "83854-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220857",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260910",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5."
},
{
"NDCCode": "83854-018-16",
"PackageDescription": "1 VIAL in 1 CARTON (83854-018-16) / 20 mL in 1 VIAL (83854-018-01) ",
"NDC11Code": "83854-0018-16",
"ProductNDC": "83854-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220857",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260910",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5."
},
{
"NDCCode": "0006-5084-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0006-5084-01) ",
"NDC11Code": "00006-5084-01",
"ProductNDC": "0006-5084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lipfendra",
"NonProprietaryName": "Lipfendra",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220848",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "ENLICITIDE DECANOATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260715",
"SamplePackage": "N",
"IndicationAndUsage": "LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.",
"Description": "LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent."
},
{
"NDCCode": "0006-5084-59",
"PackageDescription": "1 BOTTLE in 1 CARTON (0006-5084-59) / 7 TABLET, FILM COATED in 1 BOTTLE (0006-5084-58) ",
"NDC11Code": "00006-5084-59",
"ProductNDC": "0006-5084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lipfendra",
"NonProprietaryName": "Lipfendra",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220848",
"LabelerName": "Merck Sharp & Dohme LLC",
"SubstanceName": "ENLICITIDE DECANOATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260715",
"SamplePackage": "Y",
"IndicationAndUsage": "LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.",
"Description": "LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent."
},
{
"NDCCode": "0054-0702-19",
"PackageDescription": "50 PACKET in 1 CARTON (0054-0702-19) / 10 mL in 1 PACKET",
"NDC11Code": "00054-0702-19",
"ProductNDC": "0054-0702",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vigabatrin For Oral Solution Usp, 500 Mg",
"NonProprietaryName": "Vigabatrin",
"DosageFormName": "FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20200710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213469",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "VIGABATRIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-epileptic Agent [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200710",
"SamplePackage": "N",
"IndicationAndUsage": "Vigabatrin for oral solution is indicated for the treatment of: 1 Refractory Complex Partial Seizures as adjunctive therapy in patients 2 years of age and older who have responded inadequately to several alternative treatments; vigabatrin for oral solution is not indicated as a first line agent ( 1.1) , 2 Infantile Spasms - monotherapy in infants 1 month to 2 years of age for whom the potential benefits outweigh the potential risk of vision loss ( 1.2) .",
"Description": "Vigabatrin, USP is an oral antiepileptic drug and is available as a white to off-white granular powder for oral solution in packets of 500 mg. The chemical name of vigabatrin, USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C 6H 11NO 2 and the molecular weight is 129.16. It has the following structural formula:. Vigabatrin, USP is a white to off white powder which is freely soluble in water, slightly soluble in methyl alcohol, very slightly soluble in ethyl alcohol and chloroform, and insoluble in toluene and hexane. The pH of a 1% aqueous solution is about 6.9. The n-octanol/water partition coefficient of vigabatrin is about 0.011 (log P=-1.96 at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pKa) of vigabatrin are 4 and 9.7 at room temperature (25°C). Vigabatrin for oral solution USP, is available as white to off-white granular powder for oral administration. Each packet contains 500 mg of vigabatrin, USP. The inactive ingredient is povidone."
},
{
"NDCCode": "12064-011-00",
"PackageDescription": "1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (12064-011-00)",
"NDC11Code": "12064-0011-00",
"ProductNDC": "12064-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flolan",
"NonProprietaryName": "Epoprostenol Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19951208",
"MarketingCategoryName": "APPROVED DRUG PRODUCT MANUFACTURED UNDER CONTRACT",
"ApplicationNumber": "NDA020444",
"LabelerName": "GlaxoSmithKline Manufacturing SpA",
"SubstanceName": "EPOPROSTENOL SODIUM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Prostacycline Vasodilator [EPC],Prostaglandins I [Chemical/Ingredient],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-12-27",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "21695-011-21",
"PackageDescription": "21 TABLET in 1 BOTTLE (21695-011-21)",
"NDC11Code": "21695-0011-21",
"ProductNDC": "21695-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA074980",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula."
},
{
"NDCCode": "21695-011-25",
"PackageDescription": "25 TABLET in 1 BOTTLE (21695-011-25)",
"NDC11Code": "21695-0011-25",
"ProductNDC": "21695-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA074980",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula."
},
{
"NDCCode": "21695-011-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-011-30)",
"NDC11Code": "21695-0011-30",
"ProductNDC": "21695-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA074980",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula."
},
{
"NDCCode": "21695-011-35",
"PackageDescription": "35 TABLET in 1 BOTTLE (21695-011-35)",
"NDC11Code": "21695-0011-35",
"ProductNDC": "21695-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA074980",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>83854-011-27</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-011-27) / 30 mL in 1 VIAL (83854-011-03) </PackageDescription>
<NDC11Code>83854-0011-27</NDC11Code>
<ProductNDC>83854-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>83854-011-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-011-25) / 2 mL in 1 VIAL (83854-011-01) </PackageDescription>
<NDC11Code>83854-0011-25</NDC11Code>
<ProductNDC>83854-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>83854-011-26</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-011-26) / 5 mL in 1 VIAL (83854-011-02) </PackageDescription>
<NDC11Code>83854-0011-26</NDC11Code>
<ProductNDC>83854-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>83854-009-27</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-009-27) / 10 mL in 1 VIAL (83854-009-03) </PackageDescription>
<NDC11Code>83854-0009-27</NDC11Code>
<ProductNDC>83854-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>83854-010-27</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-010-27) / 50 mL in 1 VIAL (83854-010-03) </PackageDescription>
<NDC11Code>83854-0010-27</NDC11Code>
<ProductNDC>83854-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>25000-011-27</NDCCode>
<PackageDescription>4 BAG in 1 BOX (25000-011-27) / 2500 CAPSULE, LIQUID FILLED in 1 BAG</PackageDescription>
<NDC11Code>25000-0011-27</NDC11Code>
<ProductNDC>25000-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dutasteride</ProprietaryName>
<NonProprietaryName>Dutasteride</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204376</ApplicationNumber>
<LabelerName>MARKSANS PHARMA LIMITED</LabelerName>
<SubstanceName>DUTASTERIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Monotherapy. Dutasteride Capsulesare indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate to. · improve symptoms. · reduce the risk of acute urinary retention (AUR), and. · reduce the risk of the need for BPH-related surgery. 1.2 Combination with Alpha-adrenergic Antagonist. Dutasteride Capsules in combination with the alpha-adrenergic antagonist, tamsulosin, is indicated for the treatment of symptomatic BPH in men with an enlarged prostate. 1.3 Limitations of Use. Dutasteride Capsules are not approved for the prevention of prostate cancer.</IndicationAndUsage>
<Description>Dutasteride is a synthetic 4-azasteroid compound that is a selective inhibitor of both the type 1 and type 2 isoforms of steroid 5 alpha-reductase, an intracellular enzyme that converts testosterone to DHT. Dutasteride is chemically designated as (5α,17β)-N-{2,5 bis(trifluoromethyl)phenyl}-3-oxo-4-azaandrost-1-ene-17-carboxamide. The empirical formula of dutasteride is C27H30F6N2O2, representing a molecular weight of 528.5 with the following structural formula. Dutasteride is a white to pale yellow powder with a melting point of 242° to 250°C. It is soluble in ethanol (44 mg/mL), methanol (64 mg/mL), and polyethylene glycol 400 (3 mg/mL), but it is insoluble in water. Each Dutasteride Capsule, administered orally, contains 0.5 mg of dutasteride dissolved in a mixture of mono and di-glycerides of caprylic/capric acid and butylated hydroxytoluene. The inactive excipients in the capsule shell are colour iron oxide yellow, gelatin, glycerin, non crystallizing Sorbitol solution, titanium dioxide and purified water. The soft gelatin capsules are printed with edible black ink Opacode Black (S-1-17823).(Containing- Isopropyl alcohol, Shellac Glaze, Black iron oxide, N-butyl alcohol, Propylene glycol, and Ammonium hydroxide).</Description>
</NDC>
<NDC>
<NDCCode>42659-011-27</NDCCode>
<PackageDescription>1000 mL in 1 BOTTLE (42659-011-27)</PackageDescription>
<NDC11Code>42659-0011-27</NDC11Code>
<ProductNDC>42659-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Plum Emergency Eyewash/eyewash Duo/eyewash Shower Iss Usa</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20160617</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part349</ApplicationNumber>
<LabelerName>Plum A/S</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>99.1</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For rinsing the eyes and skin to reduce risk of severe injury caused by chemicals or particulate contamination.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>44397-011-27</NDCCode>
<PackageDescription>164.5 L in 1 CYLINDER (44397-011-27)</PackageDescription>
<NDC11Code>44397-0011-27</NDC11Code>
<ProductNDC>44397-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrogen</ProprietaryName>
<NonProprietaryName>Nitrogen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19740101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205891</ApplicationNumber>
<LabelerName>Argyle Welding Supply Company, Inc.</LabelerName>
<SubstanceName>NITROGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>52086-011-27</NDCCode>
<PackageDescription>6800 L in 1 CYLINDER (52086-011-27) </PackageDescription>
<NDC11Code>52086-0011-27</NDC11Code>
<ProductNDC>52086-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19830908</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205889</ApplicationNumber>
<LabelerName>Helget Gas Products</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>999</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>52584-011-15</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (52584-011-15) > 133.27 mg in 1 VIAL</PackageDescription>
<NDC11Code>52584-0011-15</NDC11Code>
<ProductNDC>52584-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chloramphenicol Sodium Succinate</ProprietaryName>
<NonProprietaryName>Chloramphenicol Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062365</ApplicationNumber>
<LabelerName>General Injectables and Vaccines, Inc</LabelerName>
<SubstanceName>CHLORAMPHENICOL SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>133.27</StrengthNumber>
<StrengthUnit>mg/133.27mg</StrengthUnit>
<Pharm_Classes>Amphenicol-class Antibacterial [EPC],Amphenicols [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>71282-011-27</NDCCode>
<PackageDescription>2 TUBE in 1 PACKAGE (71282-011-27) / 100 g in 1 TUBE</PackageDescription>
<NDC11Code>71282-0011-27</NDC11Code>
<ProductNDC>71282-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>4jointz</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170131</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>ARP(USA) Pty Ltd</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses Temporarily relieves the aches and pains of muscles and joints associated with. ■ arthritis ■ simple backache ■ strains ■ bruises ■ sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>74761-011-27</NDCCode>
<PackageDescription>600 mL in 1 BOTTLE (74761-011-27) </PackageDescription>
<NDC11Code>74761-0011-27</NDC11Code>
<ProductNDC>74761-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Antibacterial Hand Sanitizer</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200419</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Guangzhou Oumiao Cosmetics Co. Ltd. </LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria on skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>79959-011-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (79959-011-01) / 27.168 g in 1 TUBE</PackageDescription>
<NDC11Code>79959-0011-01</NDC11Code>
<ProductNDC>79959-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ulta All Clear Serum</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M006</ApplicationNumber>
<LabelerName>APR BEAUTY GROUP INC</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>84003-011-00</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (84003-011-00) / 27 mL in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>84003-0011-00</NDC11Code>
<ProductNDC>84003-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dolce And Gabbana Everlast Foundation Spf 20 11w Light Medium</ProprietaryName>
<NonProprietaryName>Octisalate, Octocrylene, Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Dolce & Gabbana Beauty S.R.L</LabelerName>
<SubstanceName>OCTISALATE; OCTOCRYLENE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>35; 50; 5; 18.8</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn . If uses directed with others sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84003-011-01</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (84003-011-01) / 27 mL in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>84003-0011-01</NDC11Code>
<ProductNDC>84003-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dolce And Gabbana Everlast Foundation Spf 20 11w Light Medium</ProprietaryName>
<NonProprietaryName>Octisalate, Octocrylene, Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Dolce & Gabbana Beauty S.R.L</LabelerName>
<SubstanceName>OCTISALATE; OCTOCRYLENE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>35; 50; 5; 18.8</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn . If uses directed with others sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>87022-011-27</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE (87022-011-27) </PackageDescription>
<NDC11Code>87022-0011-27</NDC11Code>
<ProductNDC>87022-011</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aromatica Hair Champu</ProprietaryName>
<NonProprietaryName>Minoxidil</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250926</StartMarketingDate>
<EndMarketingDate>20270926</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>LABORATORIO MK SRL</LabelerName>
<SubstanceName>MINOXIDIL</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/473mL</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250926</StartMarketingDatePackage>
<EndMarketingDatePackage>20270926</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Apply to wet hair, lather and rinse, repeat if necessary.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>83854-002-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-002-10) / 20 mL in 1 VIAL (83854-002-01) </PackageDescription>
<NDC11Code>83854-0002-10</NDC11Code>
<ProductNDC>83854-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220268</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide injection is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older( 1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older ( 1.2) .</IndicationAndUsage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-Nbenzyl- 3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>83854-017-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-017-10) / 4 mL in 1 VIAL (83854-017-01) </PackageDescription>
<NDC11Code>83854-0017-10</NDC11Code>
<ProductNDC>83854-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219924</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
<Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is Freely soluble in water, slightly soluble in alcohol, practically insoluble in chloroform and ether. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg (vials) of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>83854-018-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-018-10) / 20 mL in 1 VIAL (83854-018-01) </PackageDescription>
<NDC11Code>83854-0018-10</NDC11Code>
<ProductNDC>83854-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220857</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>83854-018-14</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (83854-018-14) / 20 mL in 1 VIAL (83854-018-01) </PackageDescription>
<NDC11Code>83854-0018-14</NDC11Code>
<ProductNDC>83854-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220857</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>83854-018-15</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-018-15) / 20 mL in 1 VIAL (83854-018-01) </PackageDescription>
<NDC11Code>83854-0018-15</NDC11Code>
<ProductNDC>83854-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220857</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>83854-018-16</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (83854-018-16) / 20 mL in 1 VIAL (83854-018-01) </PackageDescription>
<NDC11Code>83854-0018-16</NDC11Code>
<ProductNDC>83854-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220857</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0006-5084-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0006-5084-01) </PackageDescription>
<NDC11Code>00006-5084-01</NDC11Code>
<ProductNDC>0006-5084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lipfendra</ProprietaryName>
<NonProprietaryName>Lipfendra</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220848</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>ENLICITIDE DECANOATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.</IndicationAndUsage>
<Description>LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>0006-5084-59</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0006-5084-59) / 7 TABLET, FILM COATED in 1 BOTTLE (0006-5084-58) </PackageDescription>
<NDC11Code>00006-5084-59</NDC11Code>
<ProductNDC>0006-5084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lipfendra</ProprietaryName>
<NonProprietaryName>Lipfendra</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220848</ApplicationNumber>
<LabelerName>Merck Sharp & Dohme LLC</LabelerName>
<SubstanceName>ENLICITIDE DECANOATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260715</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>LIPFENDRA® is indicated as an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C) in adults with hypercholesterolemia, including heterozygous familial hypercholesterolemia (HeFH). Cardiovascular outcomes trials have demonstrated that reducing LDL-C lowers the risk for major adverse cardiovascular events (MACE) in adults at increased risk when treated with statins or monoclonal antibody proprotein convertase subtilisin kexin type 9 (PCSK9) inhibitors as an add-on to statin therapy.</IndicationAndUsage>
<Description>LIPFENDRA (enlicitide) tablets for oral use contain enlicitide decanoate, a PCSK9 inhibitor. The chemical name of enlicitide decanoate is 6-({[(11S,17S,20S,23S,27S,39S,42S,63S,66R)-47-Fluoro-20-[(1R)-1-hydroxyethyl]-17-[(4-methoxyphenyl)methyl]-11,63-dimethyl-10,16,19,22,30,40,58,61,64,67,70-undecaoxo-28-oxa-1,9,15,18,21,24,31,41,51,62,65,68-dodecaazanonacyclo[37.18.11.23,6.124,42.133,37.144,51.011,15.023,27.045,50]triheptaconta-3,5,33(71),34,36,44(69),45,47,49,72-decaen-66-yl]methyl}amino)-N,N,N-trimethyl-6-oxohexan-1-aminium decanoate. Enlicitide decanoate is a white to off-white powder that is slightly soluble in water. The molecular formula is C92H129FN14O17 and the molecular weight is 1722.12 g/mol. The chemical structure of enlicitide decanoate is. LIPFENDRA is available as film-coated tablets for oral administration, each containing 20 mg of enlicitide (equivalent to 22.21 mg enlicitide decanoate) and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium caprate. The film coating contains calcium carbonate, ethylene glycol and vinyl alcohol graft copolymer, glyceryl mono and dicaprylocaprate, polyvinyl alcohol, and talc. Carnauba wax is added as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>0054-0702-19</NDCCode>
<PackageDescription>50 PACKET in 1 CARTON (0054-0702-19) / 10 mL in 1 PACKET</PackageDescription>
<NDC11Code>00054-0702-19</NDC11Code>
<ProductNDC>0054-0702</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vigabatrin For Oral Solution Usp, 500 Mg</ProprietaryName>
<NonProprietaryName>Vigabatrin</NonProprietaryName>
<DosageFormName>FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213469</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>VIGABATRIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vigabatrin for oral solution is indicated for the treatment of: 1 Refractory Complex Partial Seizures as adjunctive therapy in patients 2 years of age and older who have responded inadequately to several alternative treatments; vigabatrin for oral solution is not indicated as a first line agent ( 1.1) , 2 Infantile Spasms - monotherapy in infants 1 month to 2 years of age for whom the potential benefits outweigh the potential risk of vision loss ( 1.2) .</IndicationAndUsage>
<Description>Vigabatrin, USP is an oral antiepileptic drug and is available as a white to off-white granular powder for oral solution in packets of 500 mg. The chemical name of vigabatrin, USP, a racemate consisting of two enantiomers, is (±) 4-amino-5-hexenoic acid. The molecular formula is C 6H 11NO 2 and the molecular weight is 129.16. It has the following structural formula:. Vigabatrin, USP is a white to off white powder which is freely soluble in water, slightly soluble in methyl alcohol, very slightly soluble in ethyl alcohol and chloroform, and insoluble in toluene and hexane. The pH of a 1% aqueous solution is about 6.9. The n-octanol/water partition coefficient of vigabatrin is about 0.011 (log P=-1.96 at physiologic pH. Vigabatrin, USP melts with decomposition in a 3-degree range within the temperature interval of 171°C to 176°C. The dissociation constants (pKa) of vigabatrin are 4 and 9.7 at room temperature (25°C). Vigabatrin for oral solution USP, is available as white to off-white granular powder for oral administration. Each packet contains 500 mg of vigabatrin, USP. The inactive ingredient is povidone.</Description>
</NDC>
<NDC>
<NDCCode>12064-011-00</NDCCode>
<PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 CARTON (12064-011-00)</PackageDescription>
<NDC11Code>12064-0011-00</NDC11Code>
<ProductNDC>12064-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flolan</ProprietaryName>
<NonProprietaryName>Epoprostenol Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19951208</StartMarketingDate>
<MarketingCategoryName>APPROVED DRUG PRODUCT MANUFACTURED UNDER CONTRACT</MarketingCategoryName>
<ApplicationNumber>NDA020444</ApplicationNumber>
<LabelerName>GlaxoSmithKline Manufacturing SpA</LabelerName>
<SubstanceName>EPOPROSTENOL SODIUM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC],Prostaglandins I [Chemical/Ingredient],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-27</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>21695-011-21</NDCCode>
<PackageDescription>21 TABLET in 1 BOTTLE (21695-011-21)</PackageDescription>
<NDC11Code>21695-0011-21</NDC11Code>
<ProductNDC>21695-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA074980</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>21695-011-25</NDCCode>
<PackageDescription>25 TABLET in 1 BOTTLE (21695-011-25)</PackageDescription>
<NDC11Code>21695-0011-25</NDC11Code>
<ProductNDC>21695-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA074980</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>21695-011-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-011-30)</PackageDescription>
<NDC11Code>21695-0011-30</NDC11Code>
<ProductNDC>21695-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA074980</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>21695-011-35</NDCCode>
<PackageDescription>35 TABLET in 1 BOTTLE (21695-011-35)</PackageDescription>
<NDC11Code>21695-0011-35</NDC11Code>
<ProductNDC>21695-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA074980</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir capsules, USP and acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir capsules, USP and acyclovir tablets, USP are formulations for oral administration. Each capsule of acyclovir contains 200 mg of acyclovir, USP and the inactive ingredients lactose monohydrate, magnesium stearate, and pregelatinized starch. The capsule shell consists of black iron oxide, edible printing ink, gelatin, and titanium dioxide. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients colloidal silicone dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. Acyclovir, USP is a white crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1, 9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
</NDC>
</NDCList>