{
"NDC": [
{
"NDCCode": "83854-039-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-039-10) / 10 mL in 1 VIAL (83854-039-01) ",
"NDC11Code": "83854-0039-10",
"ProductNDC": "83854-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20260421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220493",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260911",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "83854-039-11",
"PackageDescription": "10 VIAL in 1 CARTON (83854-039-11) / 30 mL in 1 VIAL (83854-039-02) ",
"NDC11Code": "83854-0039-11",
"ProductNDC": "83854-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20260421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220493",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260911",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "83854-002-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-002-10) / 20 mL in 1 VIAL (83854-002-01) ",
"NDC11Code": "83854-0002-10",
"ProductNDC": "83854-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lacosamide",
"NonProprietaryName": "Lacosamide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220268",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LACOSAMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260121",
"SamplePackage": "N",
"IndicationAndUsage": "Lacosamide injection is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older( 1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older ( 1.2) .",
"Description": "The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-Nbenzyl- 3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol."
},
{
"NDCCode": "83854-004-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-004-10) / 10 mL in 1 VIAL (83854-004-01) ",
"NDC11Code": "83854-0004-10",
"ProductNDC": "83854-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20260422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220493",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260422",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "83854-004-11",
"PackageDescription": "10 VIAL in 1 CARTON (83854-004-11) / 30 mL in 1 VIAL (83854-004-02) ",
"NDC11Code": "83854-0004-11",
"ProductNDC": "83854-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20260422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220493",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260911",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "83854-005-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-005-10) / 30 mL in 1 VIAL (83854-005-01) ",
"NDC11Code": "83854-0005-10",
"ProductNDC": "83854-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20260422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220493",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260422",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "83854-005-11",
"PackageDescription": "10 VIAL in 1 CARTON (83854-005-11) / 10 mL in 1 VIAL (83854-005-02) ",
"NDC11Code": "83854-0005-11",
"ProductNDC": "83854-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; RETROBULBAR",
"StartMarketingDate": "20260422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220493",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260911",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].",
"Description": "Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative."
},
{
"NDCCode": "83854-007-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-007-10) / 4 mL in 1 VIAL (83854-007-01) ",
"NDC11Code": "83854-0007-10",
"ProductNDC": "83854-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20260227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220427",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260227",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution, each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C 17H 20N 2O 5S Molecular weight: 364.42."
},
{
"NDCCode": "83854-009-27",
"PackageDescription": "25 VIAL in 1 CARTON (83854-009-27) / 10 mL in 1 VIAL (83854-009-03) ",
"NDC11Code": "83854-0009-27",
"ProductNDC": "83854-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251229",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "83854-010-25",
"PackageDescription": "25 VIAL in 1 CARTON (83854-010-25) / 10 mL in 1 VIAL (83854-010-01) ",
"NDC11Code": "83854-0010-25",
"ProductNDC": "83854-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION",
"StartMarketingDate": "20250409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219535",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260206",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].",
"Description": "Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "83854-013-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-013-10) / 20 mL in 1 VIAL (83854-013-01) ",
"NDC11Code": "83854-0013-10",
"ProductNDC": "83854-013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20250321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250321",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "83854-013-26",
"PackageDescription": "25 VIAL in 1 CARTON (83854-013-26) / 10 mL in 1 VIAL (83854-013-02) ",
"NDC11Code": "83854-0013-26",
"ProductNDC": "83854-013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20250321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "83854-014-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-014-10) / 30 mL in 1 VIAL (83854-014-01) ",
"NDC11Code": "83854-0014-10",
"ProductNDC": "83854-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250321",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "83854-014-26",
"PackageDescription": "10 VIAL in 1 CARTON (83854-014-26) / 20 mL in 1 VIAL (83854-014-02) ",
"NDC11Code": "83854-0014-26",
"ProductNDC": "83854-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropivacaine Hydrochloride",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20250321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219883",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251008",
"SamplePackage": "N",
"IndicationAndUsage": "Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "83854-017-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-017-10) / 4 mL in 1 VIAL (83854-017-01) ",
"NDC11Code": "83854-0017-10",
"ProductNDC": "83854-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Norepinephrine Bitartrate",
"NonProprietaryName": "Norepinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219924",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "NOREPINEPHRINE BITARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251125",
"SamplePackage": "N",
"IndicationAndUsage": "Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.",
"Description": "Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is Freely soluble in water, slightly soluble in alcohol, practically insoluble in chloroform and ether. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg (vials) of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas."
},
{
"NDCCode": "83854-018-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-018-10) / 20 mL in 1 VIAL (83854-018-01) ",
"NDC11Code": "83854-0018-10",
"ProductNDC": "83854-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propofol",
"NonProprietaryName": "Propofol",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220857",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "PROPOFOL",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260714",
"SamplePackage": "N",
"IndicationAndUsage": "Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.",
"Description": "Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5."
},
{
"NDCCode": "83854-021-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-021-10) / 1 mL in 1 VIAL (83854-021-01) ",
"NDC11Code": "83854-0021-10",
"ProductNDC": "83854-021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketrolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20260925",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA221041",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260925",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
},
{
"NDCCode": "83854-035-10",
"PackageDescription": "10 VIAL in 1 CARTON (83854-035-10) / 10 mL in 1 VIAL (83854-035-01) ",
"NDC11Code": "83854-0035-10",
"ProductNDC": "83854-035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bumetanide",
"NonProprietaryName": "Bumetanide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20260227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220427",
"LabelerName": "Anthea Pharma Private Limited",
"SubstanceName": "BUMETANIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260630",
"SamplePackage": "N",
"IndicationAndUsage": "Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.",
"Description": "Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution, each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C 17H 20N 2O 5S Molecular weight: 364.42."
},
{
"NDCCode": "10695-039-10",
"PackageDescription": "1 kg in 1 BOTTLE (10695-039-10)",
"NDC11Code": "10695-0039-10",
"ProductNDC": "10695-039",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Vancomycin Hcl",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170525",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Willow Birch Pharma, Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2017-12-20",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "17312-039-15",
"PackageDescription": "1 BOTTLE, DROPPER in 1 PACKAGE (17312-039-15) > 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "17312-0039-15",
"ProductNDC": "17312-039",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Eye Floaters Relief",
"NonProprietaryName": "Chelidonium Majus, Physostigma Venenosum Seed, Euphrasia Stricta,potassium Sulfate, Sodium Chloride, Phosphorus, Silicon Dioxide, Sepia Officinalis Juice",
"DosageFormName": "LIQUID",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20180528",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "TRP Company",
"SubstanceName": "CHELIDONIUM MAJUS; EUPHRASIA STRICTA; PHOSPHORUS; PHYSOSTIGMA VENENOSUM SEED; POTASSIUM SULFATE; SEPIA OFFICINALIS JUICE; SILICON DIOXIDE; SODIUM CHLORIDE",
"StrengthNumber": "6; 6; 12; 12; 10; 7; 12; 10",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180528",
"SamplePackage": "N",
"IndicationAndUsage": "Uses:* According to homeopathic indications these ingredients provide temporary relief from symptoms such as:. Floaters Squiggly lines in vision Irritation Dark dots in vision Shapes in vision Dust particles in vision; after serious causes have been ruled out by a physician. *These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "33261-039-10",
"PackageDescription": "10 CAPSULE, LIQUID FILLED in 1 BOTTLE (33261-039-10)",
"NDC11Code": "33261-0039-10",
"ProductNDC": "33261-039",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Non-habit Forming Stool Softener",
"NonProprietaryName": "Docusate Sodium",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20120329",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "DOCUSATE SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Relieves occasional constipation. . Generally produces bowel movement within 12 to72 hours."
},
{
"NDCCode": "42806-039-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (42806-039-10) ",
"NDC11Code": "42806-0039-10",
"ProductNDC": "42806-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betaxolol",
"NonProprietaryName": "Betaxolol",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100720",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075541",
"LabelerName": "Epic Pharma LLC",
"SubstanceName": "BETAXOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100720",
"SamplePackage": "N",
"IndicationAndUsage": "Betaxolol is indicated in the management of hypertension. It may be used alone or concomitantly with other antihypertensive agents, particularly thiazide-type diuretics.",
"Description": "Betaxolol is a β1-selective (cardioselective) adrenergic receptor blocking agent available as 10-mg and 20-mg tablets for oral administration. Betaxolol is chemically described as 2-propanol,1-[4-[2-(cyclopropylmethoxy)ethyl]phenoxy]-3-[(1-methylethyl)amino]-,hydrochloride,(±). It has the following chemical structure:. Betaxolol hydrochloride is a water-soluble white crystalline powder with a molecular formula of C18H29NO3HCl and a molecular weight of 343.9. It is freely soluble in water, ethanol, chloroform, and methanol, and has a pKa of 9.4. The inactive ingredients are anhydrous lactose, carnauba wax, hypromellose, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregeletanized starch (corn), sodium starch glycolate, stearic acid and titanium dioxide."
},
{
"NDCCode": "43744-039-10",
"PackageDescription": "1 g in 1 DRUM (43744-039-10)",
"NDC11Code": "43744-0039-10",
"ProductNDC": "43744-039",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "43744-039-15",
"PackageDescription": "10 g in 1 DRUM (43744-039-15)",
"NDC11Code": "43744-0039-15",
"ProductNDC": "43744-039",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "47335-039-64",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (47335-039-64) / 3 TABLET, FILM COATED in 1 BLISTER PACK (47335-039-60) ",
"NDC11Code": "47335-0039-64",
"ProductNDC": "47335-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosentan",
"NonProprietaryName": "Bosentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209324",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "BOSENTAN",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190426",
"SamplePackage": "N",
"IndicationAndUsage": "Bosentan is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1): 1 in adults to improve exercise ability and to decrease clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (60%), PAH associated with connective tissue diseases (21%), and PAH associated with congenital heart disease with left-to-right shunts (18%) [see Clinical Studies (14.1)]., 2 in pediatric patients aged 3 years and older with idiopathic or congenital PAH to improve pulmonary vascular resistance (PVR), which is expected to result in an improvement in exercise ability.",
"Description": "Bosentan is an endothelin receptor antagonist that belongs to a class of highly substituted pyrimidine derivatives, with no chiral centers. It is designated chemically as 4-tert-butyl-N-[6-(2-hydroxy-ethoxy)-5-(2-methoxy-phenoxy)-[2,2’]-bipyrimidin-4-yl]-benzenesulfonamide monohydrate and has the following structural formula. Bosentan has a molecular weight of 569.63 and a molecular formula of C27H29N5O6SH2O. Bosentan is a white to off-white crystalline powder. It is poorly soluble in water. In the solid state, bosentan is very stable, is not hygroscopic and is not light sensitive. Bosentan is available as 62.5 mg and 125 mg film-coated tablets for oral administration, and contains the following excipients: corn starch, ethylcellulose, glyceryl behenate, hydroxypropylmethylcellulose, iron oxide red, iron oxide yellow, magnesium stearate, povidone, pregelatinized maize starch, sodium starch glycolate, talc, titanium dioxide, and triacetin. Each bosentan 62.5 mg tablet contains 64.541 mg of bosentan monohydrate, equivalent to 62.5 mg of anhydrous bosentan. Each bosentan 125 mg tablet contains 129.082 mg of bosentan monohydrate, equivalent to 125 mg of anhydrous bosentan."
},
{
"NDCCode": "49781-039-20",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (49781-039-20) > 2 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "49781-0039-20",
"ProductNDC": "49781-039",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Mucus Relief",
"ProprietaryNameSuffix": "Cold And Sinus",
"NonProprietaryName": "Acetaminophen, Guaifenesin, Phenylephrine Hcl",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131030",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Cardinal Health",
"SubstanceName": "ACETAMINOPHEN; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 200; 5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "49999-039-10",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (49999-039-10)",
"NDC11Code": "49999-0039-10",
"ProductNDC": "49999-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074112",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2017-02-03"
},
{
"NDCCode": "52000-039-10",
"PackageDescription": "100 g in 1 BOTTLE, PLASTIC (52000-039-10) ",
"NDC11Code": "52000-0039-10",
"ProductNDC": "52000-039",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vaporizing Chest Rub",
"NonProprietaryName": "Menthol And Camphor And Eucalyptus Oil",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180514",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Universal Distribution Center LLC",
"SubstanceName": "CAMPHOR (SYNTHETIC); EUCALYPTUS OIL; MENTHOL, UNSPECIFIED FORM",
"StrengthNumber": "4.7; 1.2; 1.25",
"StrengthUnit": "g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2025-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180514",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 on chest and throat, helps temporarily relive cough due to common cold., 2 on joints and muscles, temporarily relives minor aches and pains."
},
{
"NDCCode": "54256-039-04",
"PackageDescription": "1 BLISTER PACK in 1 BOX (54256-039-04) > 10 SUPPOSITORY in 1 BLISTER PACK",
"NDC11Code": "54256-0039-04",
"ProductNDC": "54256-039",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Notatum",
"NonProprietaryName": "Penicillium Chrysogenum Var. Chrysogenum",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20010101",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "BioResource Inc.",
"SubstanceName": "PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM",
"StrengthNumber": "3",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For temporary relief of minor cold symptoms, fever, earaches, and respiratory infections."
},
{
"NDCCode": "54879-039-15",
"PackageDescription": "10 VIAL in 1 CARTON (54879-039-15) > 5 mL in 1 VIAL",
"NDC11Code": "54879-0039-15",
"ProductNDC": "54879-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoproterenol Hydrochloride",
"NonProprietaryName": "Isoproterenol Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRACARDIAC; INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20221215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215542",
"LabelerName": "STI Pharma LLC",
"SubstanceName": "ISOPROTERENOL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20221215",
"SamplePackage": "N",
"IndicationAndUsage": "Isoproterenol hydrochloride injection is indicated: 1 For mild or transient episodes of heart block that do not require electric shock or pacemaker therapy., 2 For serious episodes of heart block and Adams-Stokes attacks (except when caused by ventricular tachycardia or fibrillation). (see CONTRAINDICATIONS), 3 For use in cardiac arrest until electric shock or pacemaker therapy, the treatments of choice, is available. (see CONTRAINDICATIONS), 4 For bronchospasm occurring during anesthesia., 5 As an adjunct to fluid and electrolyte replacement therapy and the use of other drugs and procedures in the treatment of hypovolemic and septic shock, low cardiac output (hypoperfusion) states, congestive heart failure, and cardiogenic shock. (see WARNINGS).",
"Description": "Isoproterenol hydrochloride is 3,4-Dihydroxy-α-[(isopropylamino)methyl] benzyl alcohol hydrochloride, a synthetic sympathomimetic amine that is structurally related to epinephrine but acts almost exclusively on beta receptors. The molecular formula is C11H17NO3 HCl. It has a molecular weight of 247.72 and the following structural formula. Isoproterenol hydrochloride is a racemic compound. Each milliliter of the sterile solution contains. The pH is adjusted between 2.5 and 4.5 with hydrochloric acid or sodium hydroxide. The sterile solution is nonpyrogenic and can be administered by the intravenous, intramuscular, subcutaneous or intracardiac routes."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>83854-039-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-039-10) / 10 mL in 1 VIAL (83854-039-01) </PackageDescription>
<NDC11Code>83854-0039-10</NDC11Code>
<ProductNDC>83854-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20260421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220493</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>83854-039-11</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-039-11) / 30 mL in 1 VIAL (83854-039-02) </PackageDescription>
<NDC11Code>83854-0039-11</NDC11Code>
<ProductNDC>83854-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20260421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220493</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>83854-002-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-002-10) / 20 mL in 1 VIAL (83854-002-01) </PackageDescription>
<NDC11Code>83854-0002-10</NDC11Code>
<ProductNDC>83854-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lacosamide</ProprietaryName>
<NonProprietaryName>Lacosamide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220268</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LACOSAMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lacosamide injection is indicated for: 1 Treatment of partial-onset seizures in patients 1 month of age and older( 1.1) , 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients 4 years of age and older ( 1.2) .</IndicationAndUsage>
<Description>The chemical name of lacosamide, USP the single (R)-enantiomer, is (R)-2-acetamido-Nbenzyl- 3-methoxypropionamide (IUPAC). Lacosamide, USP is a functionalized amino acid. Its molecular formula is C 13H 18N 2O 3and its molecular weight is 250.30. The chemical structure is:. Lacosamide, USP is a white to light yellow powder. It is sparingly soluble in water and slightly soluble in acetonitrile and ethanol.</Description>
</NDC>
<NDC>
<NDCCode>83854-004-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-004-10) / 10 mL in 1 VIAL (83854-004-01) </PackageDescription>
<NDC11Code>83854-0004-10</NDC11Code>
<ProductNDC>83854-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20260422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220493</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>83854-004-11</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-004-11) / 30 mL in 1 VIAL (83854-004-02) </PackageDescription>
<NDC11Code>83854-0004-11</NDC11Code>
<ProductNDC>83854-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20260422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220493</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>83854-005-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-005-10) / 30 mL in 1 VIAL (83854-005-01) </PackageDescription>
<NDC11Code>83854-0005-10</NDC11Code>
<ProductNDC>83854-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20260422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220493</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>83854-005-11</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-005-11) / 10 mL in 1 VIAL (83854-005-02) </PackageDescription>
<NDC11Code>83854-0005-11</NDC11Code>
<ProductNDC>83854-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; RETROBULBAR</RouteName>
<StartMarketingDate>20260422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220493</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine hydrochloride injection is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of bupivacaine hydrochloride injection is recommended for each type of block indicated to produce local or regional anesthesia or analgesia [ see Dosage and Administration ( 2.2) ]. Limitations of Use. Not all blocks are indicated for use with bupivacaine hydrochloride injection given clinically significant risks associated with use [ see Dosage and Administration ( 2.2), Contraindications ( 4), Warnings and Precautions ( 5.1, 5.4, 5.5, 5.7, 5.9) ].</IndicationAndUsage>
<Description>Bupivacaine hydrochloride injection, USP contains bupivacaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for bupivacaine hydrochloride injection, USP is by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. Multiple-dose vials contain methylparaben [see Warnings and Precautions ( 5.4)]. Bupivacaine hydrochloride is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. It is a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. It has the following structural formula. Bupivacaine hydrochloride injection, USP is a clear and colorless sterile isotonic solution. Each mL of single-dose vial contains 2.5 mg, 5 mg or 7.5 mg of bupivacaine hydrochloride (equivalent to 2.22 mg, 4.44 mg or 6.66 mg of bupivacaine, respectively), sodium chloride for isotonicity, sodium hydroxide or hydrochloric acid to adjust the pH between 4 and 6.5, in water for injection. For the Multiple-dose vials, each mL also contains 1 mg methylparaben as preservative.</Description>
</NDC>
<NDC>
<NDCCode>83854-007-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-007-10) / 4 mL in 1 VIAL (83854-007-01) </PackageDescription>
<NDC11Code>83854-0007-10</NDC11Code>
<ProductNDC>83854-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20260227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220427</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution, each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C 17H 20N 2O 5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>83854-009-27</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-009-27) / 10 mL in 1 VIAL (83854-009-03) </PackageDescription>
<NDC11Code>83854-0009-27</NDC11Code>
<ProductNDC>83854-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>83854-010-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-010-25) / 10 mL in 1 VIAL (83854-010-01) </PackageDescription>
<NDC11Code>83854-0010-25</NDC11Code>
<ProductNDC>83854-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION</RouteName>
<StartMarketingDate>20250409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219535</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection is recommended for each type of block indicated to produce local or regional or anesthesia or analgesia [see Dosage and Administration ( 2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP - MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HClH 2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). Lidocaine hydrochloride injection, USP -MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £Quantity is equivalent to 10.7 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.4 mg/ mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>83854-013-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-013-10) / 20 mL in 1 VIAL (83854-013-01) </PackageDescription>
<NDC11Code>83854-0013-10</NDC11Code>
<ProductNDC>83854-013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20250321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>83854-013-26</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (83854-013-26) / 10 mL in 1 VIAL (83854-013-02) </PackageDescription>
<NDC11Code>83854-0013-26</NDC11Code>
<ProductNDC>83854-013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20250321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>83854-014-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-014-10) / 30 mL in 1 VIAL (83854-014-01) </PackageDescription>
<NDC11Code>83854-0014-10</NDC11Code>
<ProductNDC>83854-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>83854-014-26</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-014-26) / 20 mL in 1 VIAL (83854-014-02) </PackageDescription>
<NDC11Code>83854-0014-26</NDC11Code>
<ProductNDC>83854-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropivacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20250321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219883</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ropivacaine Hydrochloride Injection is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>Ropivacaine Hydrochloride Injection, USP is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. Ropivacaine Hydrochloride Injection,USP is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula. C 17H 26N 2OHClH 2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Ropivacaine Hydrochloride Injection, USP is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of Ropivacaine Hydrochloride Injection, USP solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>83854-017-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-017-10) / 4 mL in 1 VIAL (83854-017-01) </PackageDescription>
<NDC11Code>83854-0017-10</NDC11Code>
<ProductNDC>83854-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Norepinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Norepinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219924</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>NOREPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Norepinephrine Bitartrate Injection is indicated to raise blood pressure in adult patients with severe, acute hypotension.</IndicationAndUsage>
<Description>Norepinephrine (sometimes referred to as l-arterenol/Levarterenol or l-norepinephrine) is a sympathomimetic amine which differs from epinephrine by the absence of a methyl group on the nitrogen atom. Norepinephrine Bitartrate is (-)-α-(aminomethyl)-3,4-dihydroxybenzyl alcohol tartrate (1:1) (salt) monohydrate (molecular weight 337.3 g/mol) and has the following structural formula. Norepinephrine Bitartrate Injection, USP is supplied in a sterile aqueous solution in the form of the bitartrate salt to be administered by intravenous infusion. Norepinephrine is Freely soluble in water, slightly soluble in alcohol, practically insoluble in chloroform and ether. Each mL contains 1 mg of norepinephrine base (equivalent to 1.89 mg of norepinephrine bitartrate, anhydrous basis), sodium chloride for isotonicity, not more than 0.2 mg (vials) of sodium metabisulfite as an antioxidant. It has a pH of 3.0 to 4.5. The air in the containers has been displaced by nitrogen gas.</Description>
</NDC>
<NDC>
<NDCCode>83854-018-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-018-10) / 20 mL in 1 VIAL (83854-018-01) </PackageDescription>
<NDC11Code>83854-0018-10</NDC11Code>
<ProductNDC>83854-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propofol</ProprietaryName>
<NonProprietaryName>Propofol</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220857</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>PROPOFOL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propofol injectable emulsion is an intravenous general anesthetic and sedation drug indicated for. : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
<Description>Propofol injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol Molecular formula: C 12H 18O Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of propofol injectable emulsion (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12mg of purified egg phospholipids (12 mg/mL), 0.05 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. Propofol injectable emulsion is isotonic and has a pH range of 4.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>83854-021-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-021-10) / 1 mL in 1 VIAL (83854-021-01) </PackageDescription>
<NDC11Code>83854-0021-10</NDC11Code>
<ProductNDC>83854-021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketrolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20260925</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA221041</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>83854-035-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (83854-035-10) / 10 mL in 1 VIAL (83854-035-01) </PackageDescription>
<NDC11Code>83854-0035-10</NDC11Code>
<ProductNDC>83854-035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bumetanide</ProprietaryName>
<NonProprietaryName>Bumetanide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20260227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220427</ApplicationNumber>
<LabelerName>Anthea Pharma Private Limited</LabelerName>
<SubstanceName>BUMETANIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances of allergic reactions to furosemide suggests a lack of cross-sensitivity.</IndicationAndUsage>
<Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution, each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula. C 17H 20N 2O 5S Molecular weight: 364.42.</Description>
</NDC>
<NDC>
<NDCCode>10695-039-10</NDCCode>
<PackageDescription>1 kg in 1 BOTTLE (10695-039-10)</PackageDescription>
<NDC11Code>10695-0039-10</NDC11Code>
<ProductNDC>10695-039</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Vancomycin Hcl</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170525</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Willow Birch Pharma, Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2017-12-20</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>17312-039-15</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 PACKAGE (17312-039-15) > 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>17312-0039-15</NDC11Code>
<ProductNDC>17312-039</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Eye Floaters Relief</ProprietaryName>
<NonProprietaryName>Chelidonium Majus, Physostigma Venenosum Seed, Euphrasia Stricta,potassium Sulfate, Sodium Chloride, Phosphorus, Silicon Dioxide, Sepia Officinalis Juice</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20180528</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>TRP Company</LabelerName>
<SubstanceName>CHELIDONIUM MAJUS; EUPHRASIA STRICTA; PHOSPHORUS; PHYSOSTIGMA VENENOSUM SEED; POTASSIUM SULFATE; SEPIA OFFICINALIS JUICE; SILICON DIOXIDE; SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>6; 6; 12; 12; 10; 7; 12; 10</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses:* According to homeopathic indications these ingredients provide temporary relief from symptoms such as:. Floaters Squiggly lines in vision Irritation Dark dots in vision Shapes in vision Dust particles in vision; after serious causes have been ruled out by a physician. *These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>33261-039-10</NDCCode>
<PackageDescription>10 CAPSULE, LIQUID FILLED in 1 BOTTLE (33261-039-10)</PackageDescription>
<NDC11Code>33261-0039-10</NDC11Code>
<ProductNDC>33261-039</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Non-habit Forming Stool Softener</ProprietaryName>
<NonProprietaryName>Docusate Sodium</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120329</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>DOCUSATE SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Relieves occasional constipation. . Generally produces bowel movement within 12 to72 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42806-039-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (42806-039-10) </PackageDescription>
<NDC11Code>42806-0039-10</NDC11Code>
<ProductNDC>42806-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betaxolol</ProprietaryName>
<NonProprietaryName>Betaxolol</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100720</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075541</ApplicationNumber>
<LabelerName>Epic Pharma LLC</LabelerName>
<SubstanceName>BETAXOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betaxolol is indicated in the management of hypertension. It may be used alone or concomitantly with other antihypertensive agents, particularly thiazide-type diuretics.</IndicationAndUsage>
<Description>Betaxolol is a β1-selective (cardioselective) adrenergic receptor blocking agent available as 10-mg and 20-mg tablets for oral administration. Betaxolol is chemically described as 2-propanol,1-[4-[2-(cyclopropylmethoxy)ethyl]phenoxy]-3-[(1-methylethyl)amino]-,hydrochloride,(±). It has the following chemical structure:. Betaxolol hydrochloride is a water-soluble white crystalline powder with a molecular formula of C18H29NO3HCl and a molecular weight of 343.9. It is freely soluble in water, ethanol, chloroform, and methanol, and has a pKa of 9.4. The inactive ingredients are anhydrous lactose, carnauba wax, hypromellose, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregeletanized starch (corn), sodium starch glycolate, stearic acid and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43744-039-10</NDCCode>
<PackageDescription>1 g in 1 DRUM (43744-039-10)</PackageDescription>
<NDC11Code>43744-0039-10</NDC11Code>
<ProductNDC>43744-039</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-039-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-039-15)</PackageDescription>
<NDC11Code>43744-0039-15</NDC11Code>
<ProductNDC>43744-039</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>47335-039-64</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (47335-039-64) / 3 TABLET, FILM COATED in 1 BLISTER PACK (47335-039-60) </PackageDescription>
<NDC11Code>47335-0039-64</NDC11Code>
<ProductNDC>47335-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosentan</ProprietaryName>
<NonProprietaryName>Bosentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190426</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209324</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>BOSENTAN</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bosentan is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1): 1 in adults to improve exercise ability and to decrease clinical worsening. Studies establishing effectiveness included predominantly patients with WHO Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (60%), PAH associated with connective tissue diseases (21%), and PAH associated with congenital heart disease with left-to-right shunts (18%) [see Clinical Studies (14.1)]., 2 in pediatric patients aged 3 years and older with idiopathic or congenital PAH to improve pulmonary vascular resistance (PVR), which is expected to result in an improvement in exercise ability.</IndicationAndUsage>
<Description>Bosentan is an endothelin receptor antagonist that belongs to a class of highly substituted pyrimidine derivatives, with no chiral centers. It is designated chemically as 4-tert-butyl-N-[6-(2-hydroxy-ethoxy)-5-(2-methoxy-phenoxy)-[2,2’]-bipyrimidin-4-yl]-benzenesulfonamide monohydrate and has the following structural formula. Bosentan has a molecular weight of 569.63 and a molecular formula of C27H29N5O6SH2O. Bosentan is a white to off-white crystalline powder. It is poorly soluble in water. In the solid state, bosentan is very stable, is not hygroscopic and is not light sensitive. Bosentan is available as 62.5 mg and 125 mg film-coated tablets for oral administration, and contains the following excipients: corn starch, ethylcellulose, glyceryl behenate, hydroxypropylmethylcellulose, iron oxide red, iron oxide yellow, magnesium stearate, povidone, pregelatinized maize starch, sodium starch glycolate, talc, titanium dioxide, and triacetin. Each bosentan 62.5 mg tablet contains 64.541 mg of bosentan monohydrate, equivalent to 62.5 mg of anhydrous bosentan. Each bosentan 125 mg tablet contains 129.082 mg of bosentan monohydrate, equivalent to 125 mg of anhydrous bosentan.</Description>
</NDC>
<NDC>
<NDCCode>49781-039-20</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (49781-039-20) > 2 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49781-0039-20</NDC11Code>
<ProductNDC>49781-039</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Mucus Relief</ProprietaryName>
<ProprietaryNameSuffix>Cold And Sinus</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Guaifenesin, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131030</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>ACETAMINOPHEN; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 200; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>49999-039-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (49999-039-10)</PackageDescription>
<NDC11Code>49999-0039-10</NDC11Code>
<ProductNDC>49999-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074112</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-02-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>52000-039-10</NDCCode>
<PackageDescription>100 g in 1 BOTTLE, PLASTIC (52000-039-10) </PackageDescription>
<NDC11Code>52000-0039-10</NDC11Code>
<ProductNDC>52000-039</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vaporizing Chest Rub</ProprietaryName>
<NonProprietaryName>Menthol And Camphor And Eucalyptus Oil</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180514</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Universal Distribution Center LLC</LabelerName>
<SubstanceName>CAMPHOR (SYNTHETIC); EUCALYPTUS OIL; MENTHOL, UNSPECIFIED FORM</SubstanceName>
<StrengthNumber>4.7; 1.2; 1.25</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 on chest and throat, helps temporarily relive cough due to common cold., 2 on joints and muscles, temporarily relives minor aches and pains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54256-039-04</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 BOX (54256-039-04) > 10 SUPPOSITORY in 1 BLISTER PACK</PackageDescription>
<NDC11Code>54256-0039-04</NDC11Code>
<ProductNDC>54256-039</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Notatum</ProprietaryName>
<NonProprietaryName>Penicillium Chrysogenum Var. Chrysogenum</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20010101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>BioResource Inc.</LabelerName>
<SubstanceName>PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For temporary relief of minor cold symptoms, fever, earaches, and respiratory infections.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54879-039-15</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (54879-039-15) > 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>54879-0039-15</NDC11Code>
<ProductNDC>54879-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoproterenol Hydrochloride</ProprietaryName>
<NonProprietaryName>Isoproterenol Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRACARDIAC; INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20221215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215542</ApplicationNumber>
<LabelerName>STI Pharma LLC</LabelerName>
<SubstanceName>ISOPROTERENOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Agonists [MoA], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isoproterenol hydrochloride injection is indicated: 1 For mild or transient episodes of heart block that do not require electric shock or pacemaker therapy., 2 For serious episodes of heart block and Adams-Stokes attacks (except when caused by ventricular tachycardia or fibrillation). (see CONTRAINDICATIONS), 3 For use in cardiac arrest until electric shock or pacemaker therapy, the treatments of choice, is available. (see CONTRAINDICATIONS), 4 For bronchospasm occurring during anesthesia., 5 As an adjunct to fluid and electrolyte replacement therapy and the use of other drugs and procedures in the treatment of hypovolemic and septic shock, low cardiac output (hypoperfusion) states, congestive heart failure, and cardiogenic shock. (see WARNINGS).</IndicationAndUsage>
<Description>Isoproterenol hydrochloride is 3,4-Dihydroxy-α-[(isopropylamino)methyl] benzyl alcohol hydrochloride, a synthetic sympathomimetic amine that is structurally related to epinephrine but acts almost exclusively on beta receptors. The molecular formula is C11H17NO3 HCl. It has a molecular weight of 247.72 and the following structural formula. Isoproterenol hydrochloride is a racemic compound. Each milliliter of the sterile solution contains. The pH is adjusted between 2.5 and 4.5 with hydrochloric acid or sodium hydroxide. The sterile solution is nonpyrogenic and can be administered by the intravenous, intramuscular, subcutaneous or intracardiac routes.</Description>
</NDC>
</NDCList>