{
"NDC": [
{
"NDCCode": "83980-024-97",
"PackageDescription": "10 TABLET in 1 BOTTLE (83980-024-97) ",
"NDC11Code": "83980-0024-97",
"ProductNDC": "83980-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "57664-024-97",
"PackageDescription": "3 BLISTER PACK in 1 BOX (57664-024-97) / 10 CAPSULE in 1 BLISTER PACK (57664-024-98) ",
"NDC11Code": "57664-0024-97",
"ProductNDC": "57664-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isotretinoin",
"NonProprietaryName": "Isotretinoin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201229",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021951",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ISOTRETINOIN",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201229",
"SamplePackage": "N",
"IndicationAndUsage": "Isotretinoin capsules are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, isotretinoin capsules are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use:. If a second course of isotretinoin capsules therapy is needed, it is not recommended before a two-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of therapy [see Dosage and Administration (2.2)].",
"Description": "Isotretinoin capsules, USP. Isotretinoin capsules, USP contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin, each capsule contains the following inactive ingredients: propyl gallate, sorbitan monooleate, soybean oil and stearoyl polyoxylglycerides. The gelatin capsules contain the following dye systems: 1 10 mg – iron oxide (yellow) and titanium dioxide;, 2 20 mg – iron oxide (red), and titanium dioxide;, 3 25 mg – FD&C Blue #1, FD&C Yellow #5 [see Warnings and Precautions (5.14)] , FD&C Yellow #6 and titanium dioxide; , 4 30 mg – iron oxide (black, red and yellow) and titanium dioxide;, 5 35 mg – FD&C Blue #2, iron oxide (black, red and yellow) and titanium dioxide;, 6 40 mg – iron oxide (black, red and yellow) and titanium dioxide."
},
{
"NDCCode": "83980-024-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (83980-024-01) ",
"NDC11Code": "83980-0024-01",
"ProductNDC": "83980-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "83980-024-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (83980-024-10) ",
"NDC11Code": "83980-0024-10",
"ProductNDC": "83980-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "83980-001-97",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (83980-001-97) ",
"NDC11Code": "83980-0001-97",
"ProductNDC": "83980-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040766",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).",
"Description": "Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide."
},
{
"NDCCode": "83980-002-97",
"PackageDescription": "10 TABLET in 1 BOTTLE (83980-002-97) ",
"NDC11Code": "83980-0002-97",
"ProductNDC": "83980-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-003-97",
"PackageDescription": "10 TABLET in 1 BOTTLE (83980-003-97) ",
"NDC11Code": "83980-0003-97",
"ProductNDC": "83980-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-004-97",
"PackageDescription": "10 TABLET in 1 BOTTLE (83980-004-97) ",
"NDC11Code": "83980-0004-97",
"ProductNDC": "83980-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-017-97",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (83980-017-97) ",
"NDC11Code": "83980-0017-97",
"ProductNDC": "83980-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203761",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260814",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2. (1), 2 nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy. (1), 3 nausea and vomiting associated with radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. (1), 4 postoperative nausea and/or vomiting. (1).",
"Description": "The active ingredient in ondansetron tablets USP is ondansetron hydrochloride USP as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.86 g/mol. Ondansetron hydrochloride USP is a white to off-white powder that is sparingly soluble in water and alcohol. Each 4 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients anhydrous lactose, ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, and triacetin. Product meets USP Dissolution Test # 4."
},
{
"NDCCode": "83980-018-97",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (83980-018-97) ",
"NDC11Code": "83980-0018-97",
"ProductNDC": "83980-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203761",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260814",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2. (1), 2 nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy. (1), 3 nausea and vomiting associated with radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. (1), 4 postoperative nausea and/or vomiting. (1).",
"Description": "The active ingredient in ondansetron tablets USP is ondansetron hydrochloride USP as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.86 g/mol. Ondansetron hydrochloride USP is a white to off-white powder that is sparingly soluble in water and alcohol. Each 4 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients anhydrous lactose, ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, and triacetin. Product meets USP Dissolution Test # 4."
},
{
"NDCCode": "83980-022-97",
"PackageDescription": "10 TABLET in 1 BOTTLE (83980-022-97) ",
"NDC11Code": "83980-0022-97",
"ProductNDC": "83980-022",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "83980-023-97",
"PackageDescription": "10 TABLET in 1 BOTTLE (83980-023-97) ",
"NDC11Code": "83980-0023-97",
"ProductNDC": "83980-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "25357-024-01",
"PackageDescription": "1 KIT in 1 CARTON (25357-024-01) * 1 SYRINGE, GLASS in 1 POUCH (25357-026-01) / 2 mL in 1 SYRINGE, GLASS * 1 SYRINGE, GLASS in 1 POUCH (25357-027-01) / 2 mL in 1 SYRINGE, GLASS",
"NDC11Code": "25357-0024-01",
"ProductNDC": "25357-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epioxa Cross-linking",
"NonProprietaryName": "Riboflavin 5-phosphate Ophthalmic",
"DosageFormName": "KIT",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260116",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219910",
"LabelerName": "Glaukos Corporation",
"Status": "Active",
"LastUpdate": "2026-01-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260116",
"SamplePackage": "N",
"IndicationAndUsage": "EPIOXA HD and EPIOXA are indicated in epithelium-on corneal collagen cross-linking for the treatment of keratoconus in adults and pediatric patients aged 13 years and older, in conjunction with the O2n System and the Boost Goggles.",
"Description": "EPIOXA HD (riboflavin 5'-phosphate ophthalmic solution) 0.239% and EPIOXA (riboflavin 5'-phosphate ophthalmic solution) 0.177% contain riboflavin 5'-phosphate, a photoenhancer, for topical ophthalmic use. EPIOXA HD 0.239% is a clear, yellow, sterile buffered solution containing 2.39 mg/mL riboflavin 5'-phosphate. The pH of the solution is 6.7 to 7.7 and the osmolality is 200 mOsm/kg to 260 mOsm/kg. Each mL of solution contains 2.50 mg of riboflavin 5'-phosphate sodium (equivalent to 1.97 mg/mL riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are hydroxypropyl methylcellulose, sodium chloride, dibasic sodium phosphate dihydrate, edetate disodium dihydrate, tromethamine, monobasic sodium phosphate dihydrate, benzalkonium chloride, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. EPIOXA 0.177% is a clear, yellow, sterile buffered solution containing 1.77 mg/mL riboflavin 5'-phosphate. The pH of the solution is 6.5 to 7.5 and the osmolality is 330 mOsm/kg to 400 mOsm/kg. Each mL of solution contains 1.85 mg of riboflavin 5'-phosphate sodium (equivalent to 1.46 mg/mL riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are sodium chloride, dibasic sodium phosphate dihydrate, tromethamine, monobasic sodium phosphate dihydrate, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The molecular formula for riboflavin 5'-phosphate sodium (Vitamin B2) is C17H20N4NaO9P with a molecular weight of 478.33 g/mol."
},
{
"NDCCode": "83872-024-01",
"PackageDescription": "30 g in 1 BOTTLE, GLASS (83872-024-01) ",
"NDC11Code": "83872-0024-01",
"ProductNDC": "83872-024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Jamaican Black Castor Oil",
"NonProprietaryName": "Castor Oil",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240220",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Shenzhen XiaoMai Manufacturing Co., Ltd.",
"SubstanceName": "CASTOR OIL",
"StrengthNumber": "97",
"StrengthUnit": "mg/100g",
"Status": "Deprecated",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240220",
"SamplePackage": "N",
"IndicationAndUsage": "Suitable for daily use to improve hair strength and scalp health. Ideal for nourishing the scalp and promoting healthier hair growth. Apply directly to the scalp and gently massage to stimulate blood circulation and hair follicles. Can be used in conjunction with regular shampooing and conditioning routines."
},
{
"NDCCode": "83980-001-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (83980-001-01) ",
"NDC11Code": "83980-0001-01",
"ProductNDC": "83980-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040766",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).",
"Description": "Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide."
},
{
"NDCCode": "83980-001-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (83980-001-05) ",
"NDC11Code": "83980-0001-05",
"ProductNDC": "83980-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040766",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).",
"Description": "Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide."
},
{
"NDCCode": "83980-001-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (83980-001-10) ",
"NDC11Code": "83980-0001-10",
"ProductNDC": "83980-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxychloroquine Sulfate",
"NonProprietaryName": "Hydroxychloroquine Sulfate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040766",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "HYDROXYCHLOROQUINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC], Antirheumatic Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).",
"Description": "Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide."
},
{
"NDCCode": "83980-002-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (83980-002-01) ",
"NDC11Code": "83980-0002-01",
"ProductNDC": "83980-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-002-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (83980-002-10) ",
"NDC11Code": "83980-0002-10",
"ProductNDC": "83980-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-003-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (83980-003-01) ",
"NDC11Code": "83980-0003-01",
"ProductNDC": "83980-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-003-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (83980-003-10) ",
"NDC11Code": "83980-0003-10",
"ProductNDC": "83980-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-004-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (83980-004-01) ",
"NDC11Code": "83980-0004-01",
"ProductNDC": "83980-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-004-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (83980-004-05) ",
"NDC11Code": "83980-0004-05",
"ProductNDC": "83980-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-004-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (83980-004-10) ",
"NDC11Code": "83980-0004-10",
"ProductNDC": "83980-004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240603",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078010",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240603",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1."
},
{
"NDCCode": "83980-005-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (83980-005-01) ",
"NDC11Code": "83980-0005-01",
"ProductNDC": "83980-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240919",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
},
{
"NDCCode": "83980-005-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (83980-005-05) ",
"NDC11Code": "83980-0005-05",
"ProductNDC": "83980-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240919",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
},
{
"NDCCode": "83980-005-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (83980-005-10) ",
"NDC11Code": "83980-0005-10",
"ProductNDC": "83980-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240919",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
},
{
"NDCCode": "83980-005-13",
"PackageDescription": "30 TABLET in 1 BOTTLE (83980-005-13) ",
"NDC11Code": "83980-0005-13",
"ProductNDC": "83980-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240919",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
},
{
"NDCCode": "83980-006-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (83980-006-01) ",
"NDC11Code": "83980-0006-01",
"ProductNDC": "83980-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240919",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
},
{
"NDCCode": "83980-006-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (83980-006-05) ",
"NDC11Code": "83980-0006-05",
"ProductNDC": "83980-006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Ipca Laboratories Limited",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240919",
"SamplePackage": "N",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>83980-024-97</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (83980-024-97) </PackageDescription>
<NDC11Code>83980-0024-97</NDC11Code>
<ProductNDC>83980-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>57664-024-97</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 BOX (57664-024-97) / 10 CAPSULE in 1 BLISTER PACK (57664-024-98) </PackageDescription>
<NDC11Code>57664-0024-97</NDC11Code>
<ProductNDC>57664-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isotretinoin</ProprietaryName>
<NonProprietaryName>Isotretinoin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201229</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021951</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ISOTRETINOIN</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isotretinoin capsules are indicated for the treatment of severe recalcitrant nodular acne in non-pregnant patients 12 years of age and older with multiple inflammatory nodules with a diameter of 5 mm or greater. Because of significant adverse reactions associated with its use, isotretinoin capsules are reserved for patients with severe nodular acne who are unresponsive to conventional therapy, including systemic antibiotics. Limitations of Use:. If a second course of isotretinoin capsules therapy is needed, it is not recommended before a two-month waiting period because the patient’s acne may continue to improve following a 15 to 20-week course of therapy [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Isotretinoin capsules, USP. Isotretinoin capsules, USP contain 10 mg, 20 mg, 25 mg, 30 mg, 35 mg or 40 mg of isotretinoin (a retinoid) in hard gelatin capsules for oral administration. In addition to the active ingredient, isotretinoin, each capsule contains the following inactive ingredients: propyl gallate, sorbitan monooleate, soybean oil and stearoyl polyoxylglycerides. The gelatin capsules contain the following dye systems: 1 10 mg – iron oxide (yellow) and titanium dioxide;, 2 20 mg – iron oxide (red), and titanium dioxide;, 3 25 mg – FD&C Blue #1, FD&C Yellow #5 [see Warnings and Precautions (5.14)] , FD&C Yellow #6 and titanium dioxide; , 4 30 mg – iron oxide (black, red and yellow) and titanium dioxide;, 5 35 mg – FD&C Blue #2, iron oxide (black, red and yellow) and titanium dioxide;, 6 40 mg – iron oxide (black, red and yellow) and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83980-024-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (83980-024-01) </PackageDescription>
<NDC11Code>83980-0024-01</NDC11Code>
<ProductNDC>83980-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>83980-024-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (83980-024-10) </PackageDescription>
<NDC11Code>83980-0024-10</NDC11Code>
<ProductNDC>83980-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>83980-001-97</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (83980-001-97) </PackageDescription>
<NDC11Code>83980-0001-97</NDC11Code>
<ProductNDC>83980-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040766</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).</IndicationAndUsage>
<Description>Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83980-002-97</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (83980-002-97) </PackageDescription>
<NDC11Code>83980-0002-97</NDC11Code>
<ProductNDC>83980-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-003-97</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (83980-003-97) </PackageDescription>
<NDC11Code>83980-0003-97</NDC11Code>
<ProductNDC>83980-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-004-97</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (83980-004-97) </PackageDescription>
<NDC11Code>83980-0004-97</NDC11Code>
<ProductNDC>83980-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-017-97</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (83980-017-97) </PackageDescription>
<NDC11Code>83980-0017-97</NDC11Code>
<ProductNDC>83980-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203761</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2. (1), 2 nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy. (1), 3 nausea and vomiting associated with radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. (1), 4 postoperative nausea and/or vomiting. (1).</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets USP is ondansetron hydrochloride USP as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.86 g/mol. Ondansetron hydrochloride USP is a white to off-white powder that is sparingly soluble in water and alcohol. Each 4 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients anhydrous lactose, ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, and triacetin. Product meets USP Dissolution Test # 4.</Description>
</NDC>
<NDC>
<NDCCode>83980-018-97</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (83980-018-97) </PackageDescription>
<NDC11Code>83980-0018-97</NDC11Code>
<ProductNDC>83980-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203761</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron is a 5-HT3 receptor antagonist indicated for the prevention of: 1 nausea and vomiting associated with highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2. (1), 2 nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy. (1), 3 nausea and vomiting associated with radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. (1), 4 postoperative nausea and/or vomiting. (1).</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets USP is ondansetron hydrochloride USP as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The empirical formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.86 g/mol. Ondansetron hydrochloride USP is a white to off-white powder that is sparingly soluble in water and alcohol. Each 4 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet USP for oral administration contains ondansetron hydrochloride USP equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients anhydrous lactose, ferric oxide yellow, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, and triacetin. Product meets USP Dissolution Test # 4.</Description>
</NDC>
<NDC>
<NDCCode>83980-022-97</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (83980-022-97) </PackageDescription>
<NDC11Code>83980-0022-97</NDC11Code>
<ProductNDC>83980-022</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>83980-023-97</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (83980-023-97) </PackageDescription>
<NDC11Code>83980-0023-97</NDC11Code>
<ProductNDC>83980-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C14H22N2O3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>25357-024-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (25357-024-01) * 1 SYRINGE, GLASS in 1 POUCH (25357-026-01) / 2 mL in 1 SYRINGE, GLASS * 1 SYRINGE, GLASS in 1 POUCH (25357-027-01) / 2 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>25357-0024-01</NDC11Code>
<ProductNDC>25357-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epioxa Cross-linking</ProprietaryName>
<NonProprietaryName>Riboflavin 5-phosphate Ophthalmic</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260116</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219910</ApplicationNumber>
<LabelerName>Glaukos Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EPIOXA HD and EPIOXA are indicated in epithelium-on corneal collagen cross-linking for the treatment of keratoconus in adults and pediatric patients aged 13 years and older, in conjunction with the O2n System and the Boost Goggles.</IndicationAndUsage>
<Description>EPIOXA HD (riboflavin 5'-phosphate ophthalmic solution) 0.239% and EPIOXA (riboflavin 5'-phosphate ophthalmic solution) 0.177% contain riboflavin 5'-phosphate, a photoenhancer, for topical ophthalmic use. EPIOXA HD 0.239% is a clear, yellow, sterile buffered solution containing 2.39 mg/mL riboflavin 5'-phosphate. The pH of the solution is 6.7 to 7.7 and the osmolality is 200 mOsm/kg to 260 mOsm/kg. Each mL of solution contains 2.50 mg of riboflavin 5'-phosphate sodium (equivalent to 1.97 mg/mL riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are hydroxypropyl methylcellulose, sodium chloride, dibasic sodium phosphate dihydrate, edetate disodium dihydrate, tromethamine, monobasic sodium phosphate dihydrate, benzalkonium chloride, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. EPIOXA 0.177% is a clear, yellow, sterile buffered solution containing 1.77 mg/mL riboflavin 5'-phosphate. The pH of the solution is 6.5 to 7.5 and the osmolality is 330 mOsm/kg to 400 mOsm/kg. Each mL of solution contains 1.85 mg of riboflavin 5'-phosphate sodium (equivalent to 1.46 mg/mL riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are sodium chloride, dibasic sodium phosphate dihydrate, tromethamine, monobasic sodium phosphate dihydrate, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The molecular formula for riboflavin 5'-phosphate sodium (Vitamin B2) is C17H20N4NaO9P with a molecular weight of 478.33 g/mol.</Description>
</NDC>
<NDC>
<NDCCode>83872-024-01</NDCCode>
<PackageDescription>30 g in 1 BOTTLE, GLASS (83872-024-01) </PackageDescription>
<NDC11Code>83872-0024-01</NDC11Code>
<ProductNDC>83872-024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Jamaican Black Castor Oil</ProprietaryName>
<NonProprietaryName>Castor Oil</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240220</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Shenzhen XiaoMai Manufacturing Co., Ltd.</LabelerName>
<SubstanceName>CASTOR OIL</SubstanceName>
<StrengthNumber>97</StrengthNumber>
<StrengthUnit>mg/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Suitable for daily use to improve hair strength and scalp health. Ideal for nourishing the scalp and promoting healthier hair growth. Apply directly to the scalp and gently massage to stimulate blood circulation and hair follicles. Can be used in conjunction with regular shampooing and conditioning routines.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>83980-001-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (83980-001-01) </PackageDescription>
<NDC11Code>83980-0001-01</NDC11Code>
<ProductNDC>83980-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040766</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).</IndicationAndUsage>
<Description>Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83980-001-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (83980-001-05) </PackageDescription>
<NDC11Code>83980-0001-05</NDC11Code>
<ProductNDC>83980-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040766</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).</IndicationAndUsage>
<Description>Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83980-001-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (83980-001-10) </PackageDescription>
<NDC11Code>83980-0001-10</NDC11Code>
<ProductNDC>83980-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
<NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040766</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydroxychloroquine sulfate is an antimalarial and antirheumatic indicated for the: 1 Treatment of uncomplicated malaria due to Plasmodium falciparum,Plasmodium malariae, Plasmodium ovale, and Plasmodium vivax in adult and pediatric patients. (1.1), 2 Prophylaxis of malaria in geographic areas where chloroquine resistance is not reported in adult and pediatric patients. (1.1), 3 Treatment of rheumatoid arthritis in adults. (1.2), 4 Treatment of systemic lupus erythematosus in adults. (1.3), 5 Treatment of chronic discoid lupus erythematosus in adults. (1.4).</IndicationAndUsage>
<Description>Hydroxychloroquine sulfate, USP is an antimalarial and antirheumatic drug, chemically described as 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino] ethanol sulfate (1:1) with the molecular formula C18H26ClN3OH2SO4. The molecular weight of hydroxychloroquine sulfate is 433.95. Its structural formula is. Hydroxychloroquine sulfate, USP is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, in chloroform, and in ether. Hydroxychloroquine sulfate tablets, USP for oral administration contain 200 mg hydroxychloroquine sulfate, USP (equivalent to 155 mg of hydroxychloroquine) and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate, hypromellose, macrogol/PEG 3350, magnesium stearate, polysorbate 80, pregelatinized starch, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>83980-002-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (83980-002-01) </PackageDescription>
<NDC11Code>83980-0002-01</NDC11Code>
<ProductNDC>83980-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-002-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (83980-002-10) </PackageDescription>
<NDC11Code>83980-0002-10</NDC11Code>
<ProductNDC>83980-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-003-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (83980-003-01) </PackageDescription>
<NDC11Code>83980-0003-01</NDC11Code>
<ProductNDC>83980-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-003-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (83980-003-10) </PackageDescription>
<NDC11Code>83980-0003-10</NDC11Code>
<ProductNDC>83980-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-004-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (83980-004-01) </PackageDescription>
<NDC11Code>83980-0004-01</NDC11Code>
<ProductNDC>83980-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-004-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (83980-004-05) </PackageDescription>
<NDC11Code>83980-0004-05</NDC11Code>
<ProductNDC>83980-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-004-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (83980-004-10) </PackageDescription>
<NDC11Code>83980-0004-10</NDC11Code>
<ProductNDC>83980-004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240603</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078010</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide tablets are indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide tablets, USP for oral administration contain furosemide, USP as the active ingredient and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, pregelatinized starch, and sodium starch glycolate. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide , USP is available as white to off white round tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide, USP is a white to slightly yellow odorless crystalline powder. It is practically insoluble in water, soluble in 15 parts of acetone, freely soluble in dimethylformamide and in solution of alkali hydroxides; soluble in methanol; sparingly soluble in alcohol; very slightly soluble in chloroform. The CAS Registry Number is 54-31-9. It has a molecular formula of C12H11ClN2O5S and a molecular weight of 330.75. The molecular structure is as follows. Tested by USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>83980-005-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (83980-005-01) </PackageDescription>
<NDC11Code>83980-0005-01</NDC11Code>
<ProductNDC>83980-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>83980-005-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (83980-005-05) </PackageDescription>
<NDC11Code>83980-0005-05</NDC11Code>
<ProductNDC>83980-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>83980-005-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (83980-005-10) </PackageDescription>
<NDC11Code>83980-0005-10</NDC11Code>
<ProductNDC>83980-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>83980-005-13</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (83980-005-13) </PackageDescription>
<NDC11Code>83980-0005-13</NDC11Code>
<ProductNDC>83980-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>83980-006-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (83980-006-01) </PackageDescription>
<NDC11Code>83980-0006-01</NDC11Code>
<ProductNDC>83980-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>83980-006-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (83980-006-05) </PackageDescription>
<NDC11Code>83980-0006-05</NDC11Code>
<ProductNDC>83980-006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Ipca Laboratories Limited</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>Propranolol hydrochloride is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It's molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
</NDCList>