{
"NDC": [
{
"NDCCode": "84053-025-56",
"PackageDescription": "56 TABLET in 1 BOTTLE (84053-025-56) ",
"NDC11Code": "84053-0025-56",
"ProductNDC": "84053-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Martek Pharmacal Co.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240201",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "84053-027-56",
"PackageDescription": "56 CAPSULE in 1 BOTTLE (84053-027-56) ",
"NDC11Code": "84053-0027-56",
"ProductNDC": "84053-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040886",
"LabelerName": "Martek Pharmacal Co.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240601",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 15 mg and 30 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available in powder-filled capsules containing 15 mg Phentermine hydrochloride (equivalent to 12 mg Phentermine) or 30 mg Phentermine hydrochloride (equivalent to 24 mg Phentermine) and inactive ingredients: corn starch, gelatin, lactose monohydrate and magnesium stearate. In addition, the 15 mg capsules contain D&C Yellow #10, FD&C Blue #1, FD&C Red #3, FD&C Red #40, titanium dioxide and the 30 mg capsules contain D&C Yellow #10, FD&C Red #3, titanium dioxide."
},
{
"NDCCode": "84053-025-07",
"PackageDescription": "7 TABLET in 1 BOTTLE (84053-025-07) ",
"NDC11Code": "84053-0025-07",
"ProductNDC": "84053-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Martek Pharmacal Co.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240201",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "84053-025-14",
"PackageDescription": "14 TABLET in 1 BOTTLE (84053-025-14) ",
"NDC11Code": "84053-0025-14",
"ProductNDC": "84053-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Martek Pharmacal Co.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240201",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "84053-025-28",
"PackageDescription": "28 TABLET in 1 BOTTLE (84053-025-28) ",
"NDC11Code": "84053-0025-28",
"ProductNDC": "84053-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Martek Pharmacal Co.",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240201",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "59779-025-22",
"PackageDescription": "56 g in 1 BOTTLE, PLASTIC (59779-025-22)",
"NDC11Code": "59779-0025-22",
"ProductNDC": "59779-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs Pharmacy Spf 15",
"NonProprietaryName": "Octinoxate, Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121219",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": "7.5; 4.5",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Sun Protection Factor 15. helps prevent sunburn. retains SPF after 80 minutes of activity in water."
},
{
"NDCCode": "74620-025-01",
"PackageDescription": "56 mL in 1 BOTTLE (74620-025-01) ",
"NDC11Code": "74620-0025-01",
"ProductNDC": "74620-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti-bacterial Hand",
"NonProprietaryName": "Anti-bacterial Hand Spray",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200407",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "COSBE LABORA TORY INC.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200407",
"SamplePackage": "N"
},
{
"NDCCode": "81282-025-01",
"PackageDescription": "56 mL in 1 BOTTLE, SPRAY (81282-025-01) ",
"NDC11Code": "81282-0025-01",
"ProductNDC": "81282-025",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "HS HomeWorx LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201201",
"SamplePackage": "N",
"IndicationAndUsage": "to help reduce bacteria on skin."
},
{
"NDCCode": "0078-0343-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0343-42) > 1 PATCH in 1 POUCH (0078-0343-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0343-42",
"ProductNDC": "0078-0343",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0344-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0344-42) > 1 PATCH in 1 POUCH (0078-0344-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0344-42",
"ProductNDC": "0078-0344",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0345-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0345-42) > 1 PATCH in 1 POUCH (0078-0345-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0345-42",
"ProductNDC": "0078-0345",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0346-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0346-42) > 1 PATCH in 1 POUCH (0078-0346-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0346-42",
"ProductNDC": "0078-0346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160331",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0078-0365-42",
"PackageDescription": "8 POUCH in 1 BOX (0078-0365-42) > 1 PATCH in 1 POUCH (0078-0365-62) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0365-42",
"ProductNDC": "0078-0365",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle-dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "19990108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160427",
"SamplePackage": "N",
"IndicationAndUsage": "Vivelle-Dot is indicated for.",
"Description": "Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7129-40",
"PackageDescription": "3 PACKET in 1 CARTON (0781-7129-40) / 8 POUCH in 1 PACKET (0781-7129-83) / 1 PATCH in 1 POUCH (0781-7129-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7129-40",
"ProductNDC": "0781-7129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7129-83",
"PackageDescription": "8 POUCH in 1 CARTON (0781-7129-83) / 1 PATCH in 1 POUCH (0781-7129-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7129-83",
"ProductNDC": "0781-7129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7138-40",
"PackageDescription": "3 PACKET in 1 CARTON (0781-7138-40) / 8 POUCH in 1 PACKET (0781-7138-83) / 1 PATCH in 1 POUCH (0781-7138-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7138-40",
"ProductNDC": "0781-7138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7138-83",
"PackageDescription": "8 POUCH in 1 CARTON (0781-7138-83) / 1 PATCH in 1 POUCH (0781-7138-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7138-83",
"ProductNDC": "0781-7138",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7144-40",
"PackageDescription": "3 PACKET in 1 CARTON (0781-7144-40) / 8 POUCH in 1 PACKET (0781-7144-83) / 1 PATCH in 1 POUCH (0781-7144-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7144-40",
"ProductNDC": "0781-7144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7144-83",
"PackageDescription": "8 POUCH in 1 CARTON (0781-7144-83) / 1 PATCH in 1 POUCH (0781-7144-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7144-83",
"ProductNDC": "0781-7144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7156-40",
"PackageDescription": "3 PACKET in 1 CARTON (0781-7156-40) / 8 POUCH in 1 PACKET (0781-7156-83) / 1 PATCH in 1 POUCH (0781-7156-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7156-40",
"ProductNDC": "0781-7156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7156-83",
"PackageDescription": "8 POUCH in 1 CARTON (0781-7156-83) / 1 PATCH in 1 POUCH (0781-7156-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7156-83",
"ProductNDC": "0781-7156",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7167-40",
"PackageDescription": "3 PACKET in 1 CARTON (0781-7167-40) / 8 POUCH in 1 PACKET (0781-7167-83) / 1 PATCH in 1 POUCH (0781-7167-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7167-40",
"ProductNDC": "0781-7167",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0781-7167-83",
"PackageDescription": "8 POUCH in 1 CARTON (0781-7167-83) / 1 PATCH in 1 POUCH (0781-7167-58) / 3.5 d in 1 PATCH",
"NDC11Code": "00781-7167-83",
"ProductNDC": "0781-7167",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "Sandoz Inc",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "25357-025-03",
"PackageDescription": "2 POUCH in 1 BOX (25357-025-03) / 1 POUCH in 1 POUCH / 1 SYRINGE, GLASS in 1 POUCH / 1 KIT in 1 SYRINGE, GLASS",
"NDC11Code": "25357-0025-03",
"ProductNDC": "25357-025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Photrexa Cross-linking Kit",
"NonProprietaryName": "Riboflavin 5-phosphate Ophthalmic",
"DosageFormName": "KIT",
"StartMarketingDate": "20170925",
"EndMarketingDate": "20290731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203324",
"LabelerName": "Glaukos Corporation",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170925",
"EndMarketingDatePackage": "20290731",
"SamplePackage": "N",
"IndicationAndUsage": "PHOTREXA® VISCOUS and PHOTREXA® are indicated for use in corneal collagen cross-linking in combination with the KXL® System for the treatment of.",
"Description": "PHOTREXA VISCOUS (riboflavin 5'-phosphate in 20% dextran ophthalmic solution) 0.146% and PHOTREXA (riboflavin 5'-phosphate ophthalmic solution) 0.146% are intended for topical ophthalmic administration as part of corneal collagen cross-linking with the KXL System. PHOTREXA VISCOUS and PHOTREXA are supplied as. PHOTREXA VISCOUS (riboflavin 5'-phosphate in 20% dextran ophthalmic solution) 0.146% is a yellow sterile buffered viscous solution containing 1.56 mg/mL riboflavin 5'-phosphate and 20% dextran. The pH of the solution is approximately 7.1 and the osmolality is 284-368 mOsm/kg. Each 1 mL of solution contains 1.64 mg of riboflavin 5'-phosphate sodium (equivalent to 1.284 mg riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are dibasic sodium phosphate dihydrate, dextran, monobasic sodium phosphate dihydrate, sodium chloride, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. PHOTREXA (riboflavin 5'-phosphate ophthalmic solution) 0.146% is a yellow sterile buffered solution containing 1.46 mg/mL riboflavin 5'-phosphate. The pH of the solution is approximately 7.1 and the osmolality is 157-181 mOsm/kg. Each 1 mL of solution contains 1.53 mg of riboflavin 5'-phosphate sodium (equivalent to 1.20 mg riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are dibasic sodium phosphate dihydrate, monobasic sodium phosphate dihydrate, sodium chloride, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The chemical formula for riboflavin 5'-phosphate sodium (Vitamin B2) is C17H20N4NaO9P with a molecular mass of 478.33 g/mol. Please refer to the KXL System Operator's Manual for a specific device description and instructions."
},
{
"NDCCode": "33332-025-03",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (33332-025-03) / .5 mL in 1 SYRINGE, GLASS (33332-025-04) ",
"NDC11Code": "33332-0025-03",
"ProductNDC": "33332-025",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Afluria",
"NonProprietaryName": "Influenza A Virus A/victoria/4897/2022 Ivr-238 (h1n1) Antigen (propiolactone Inactivated), Influenza A Virus A/croatia/10136rv/2023 X-425a (h3n2) Antigen (propiolactone Inactivated), Influenza B Virus B/austria/1359417/2021 Bvr-26 Antigen (propiolactone Inactivated)",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20250701",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125254",
"LabelerName": "Seqirus PTY LTD.",
"SubstanceName": "INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA A VIRUS A/CROATIA/10136RV/2023 X-425A (H3N2) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (PROPIOLACTONE INACTIVATED)",
"StrengthNumber": "15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250701",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "AFLURIA® is an inactivated influenza vaccine indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B virus contained in the vaccine. AFLURIA is approved for use in persons 6 months of age and older.",
"Description": "AFLURIA, Influenza Vaccine, is a sterile, clear, colorless to slightly opalescent injectable suspension for intramuscular use with some sediment that resuspends upon shaking to form a homogeneous suspension. AFLURIA is prepared from influenza viruses propagated in the allantoic fluid of embryonated chicken eggs. Following harvest, the viruses are purified in a sucrose density gradient using continuous flow zonal centrifugation. The purified viruses are inactivated with beta-propiolactone, and the virus particles are disrupted using sodium taurodeoxycholate to produce “split virions”. The disrupted viruses are further purified and suspended in a phosphate buffered isotonic solution. AFLURIA is standardized according to USPHS requirements for the 2025-2026 influenza season and is formulated to contain 45 mcg hemagglutinin (HA) per 0.5 mL dose in the recommended ratio of 15 mcg HA for each of the three influenza strains recommended for the 2025-2026 Northern Hemisphere influenza season:. A/Victoria/4897/2022 IVR-238 (an A/Victoria/4897/2022 (H1N1)pdm09-like virus);. A/Croatia/10136RV/2023 X-425A (an A/Croatia/10136RV/2023 (H3N2)-like virus); and. B/Austria/1359417/2021 BVR-26 (a B/Austria/1359417/2021-like virus). A 0.25 mL dose contains 7.5 mcg HA of each of the same influenza strains. Thimerosal, a mercury derivative, is not used in the manufacturing process for the single dose presentation. This presentation does not contain preservative. The multi-dose presentation contains thimerosal added as a preservative; each 0.5 mL dose contains 24.5 mcg of mercury and each 0.25 mL dose contains 12.25 mcg of mercury. A single 0.5 mL dose of AFLURIA contains sodium chloride (4.1 mg), monobasic sodium phosphate (80 mcg), dibasic sodium phosphate (300 mcg), monobasic potassium phosphate (20 mcg), potassium chloride (20 mcg), and calcium chloride (0.5 mcg). From the manufacturing process, each 0.5 mL dose may also contain residual amounts of sodium taurodeoxycholate (≤ 10 ppm), ovalbumin (< 1 mcg), sucrose (< 10 mcg), neomycin sulfate (≤ 61.5 nanograms [ng]), polymyxin B (≤ 10.5 ng), beta-propiolactone (< 2.3 ng) and hydrocortisone (≤ 0.56 ng). A single 0.25 mL dose of AFLURIA contains half of these quantities. The rubber tip cap and plunger used for the preservative-free, single-dose syringes and the rubber stoppers used for the multi-dose vial are not made with natural rubber latex."
},
{
"NDCCode": "53002-1807-1",
"PackageDescription": "8 POUCH in 1 PACKET (53002-1807-1) / 1 d in 1 POUCH",
"NDC11Code": "53002-1807-01",
"ProductNDC": "53002-1807",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20221101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "53002-1808-1",
"PackageDescription": "8 POUCH in 1 PACKET (53002-1808-1) / 1 d in 1 POUCH",
"NDC11Code": "53002-1808-01",
"ProductNDC": "53002-1808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020538",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20221101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system is indicated for.",
"Description": "Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "54868-4242-0",
"PackageDescription": "8 POUCH in 1 PACKET (54868-4242-0) > 1 PATCH in 1 POUCH > 3.5 d in 1 PATCH",
"NDC11Code": "54868-4242-00",
"ProductNDC": "54868-4242",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle Dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20030610",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Vivelle-Dot® (estradiol transdermal system) is indicated in: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure., 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered. .",
"Description": "Vivelle-Dot® (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. Vivelle-Dot is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "54868-4243-0",
"PackageDescription": "8 POUCH in 1 PACKET (54868-4243-0) > 1 PATCH in 1 POUCH > 3.5 d in 1 PATCH",
"NDC11Code": "54868-4243-00",
"ProductNDC": "54868-4243",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle Dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20030610",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Vivelle-Dot® (estradiol transdermal system) is indicated in: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure., 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered. .",
"Description": "Vivelle-Dot® (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. Vivelle-Dot is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "54868-4244-0",
"PackageDescription": "8 POUCH in 1 PACKET (54868-4244-0) > 1 PATCH in 1 POUCH > 3.5 d in 1 PATCH",
"NDC11Code": "54868-4244-00",
"ProductNDC": "54868-4244",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vivelle Dot",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20030610",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020538",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Vivelle-Dot® (estradiol transdermal system) is indicated in: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure., 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered. .",
"Description": "Vivelle-Dot® (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. Vivelle-Dot is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>84053-025-56</NDCCode>
<PackageDescription>56 TABLET in 1 BOTTLE (84053-025-56) </PackageDescription>
<NDC11Code>84053-0025-56</NDC11Code>
<ProductNDC>84053-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Martek Pharmacal Co.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>84053-027-56</NDCCode>
<PackageDescription>56 CAPSULE in 1 BOTTLE (84053-027-56) </PackageDescription>
<NDC11Code>84053-0027-56</NDC11Code>
<ProductNDC>84053-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040886</ApplicationNumber>
<LabelerName>Martek Pharmacal Co.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 15 mg and 30 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available in powder-filled capsules containing 15 mg Phentermine hydrochloride (equivalent to 12 mg Phentermine) or 30 mg Phentermine hydrochloride (equivalent to 24 mg Phentermine) and inactive ingredients: corn starch, gelatin, lactose monohydrate and magnesium stearate. In addition, the 15 mg capsules contain D&C Yellow #10, FD&C Blue #1, FD&C Red #3, FD&C Red #40, titanium dioxide and the 30 mg capsules contain D&C Yellow #10, FD&C Red #3, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>84053-025-07</NDCCode>
<PackageDescription>7 TABLET in 1 BOTTLE (84053-025-07) </PackageDescription>
<NDC11Code>84053-0025-07</NDC11Code>
<ProductNDC>84053-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Martek Pharmacal Co.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>84053-025-14</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (84053-025-14) </PackageDescription>
<NDC11Code>84053-0025-14</NDC11Code>
<ProductNDC>84053-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Martek Pharmacal Co.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>84053-025-28</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (84053-025-28) </PackageDescription>
<NDC11Code>84053-0025-28</NDC11Code>
<ProductNDC>84053-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Martek Pharmacal Co.</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY ( 12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>59779-025-22</NDCCode>
<PackageDescription>56 g in 1 BOTTLE, PLASTIC (59779-025-22)</PackageDescription>
<NDC11Code>59779-0025-22</NDC11Code>
<ProductNDC>59779-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs Pharmacy Spf 15</ProprietaryName>
<NonProprietaryName>Octinoxate, Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121219</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>7.5; 4.5</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Sun Protection Factor 15. helps prevent sunburn. retains SPF after 80 minutes of activity in water.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>74620-025-01</NDCCode>
<PackageDescription>56 mL in 1 BOTTLE (74620-025-01) </PackageDescription>
<NDC11Code>74620-0025-01</NDC11Code>
<ProductNDC>74620-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti-bacterial Hand</ProprietaryName>
<NonProprietaryName>Anti-bacterial Hand Spray</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200407</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>COSBE LABORA TORY INC.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>81282-025-01</NDCCode>
<PackageDescription>56 mL in 1 BOTTLE, SPRAY (81282-025-01) </PackageDescription>
<NDC11Code>81282-0025-01</NDC11Code>
<ProductNDC>81282-025</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>HS HomeWorx LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to help reduce bacteria on skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0078-0343-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0343-42) > 1 PATCH in 1 POUCH (0078-0343-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0343-42</NDC11Code>
<ProductNDC>0078-0343</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0344-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0344-42) > 1 PATCH in 1 POUCH (0078-0344-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0344-42</NDC11Code>
<ProductNDC>0078-0344</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0345-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0345-42) > 1 PATCH in 1 POUCH (0078-0345-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0345-42</NDC11Code>
<ProductNDC>0078-0345</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0346-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0346-42) > 1 PATCH in 1 POUCH (0078-0346-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0346-42</NDC11Code>
<ProductNDC>0078-0346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0078-0365-42</NDCCode>
<PackageDescription>8 POUCH in 1 BOX (0078-0365-42) > 1 PATCH in 1 POUCH (0078-0365-62) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0365-42</NDC11Code>
<ProductNDC>0078-0365</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle-dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>19990108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vivelle-Dot is indicated for.</IndicationAndUsage>
<Description>Vivelle-Dot (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)- triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Vivelle-Dot is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7129-40</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (0781-7129-40) / 8 POUCH in 1 PACKET (0781-7129-83) / 1 PATCH in 1 POUCH (0781-7129-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7129-40</NDC11Code>
<ProductNDC>0781-7129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7129-83</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0781-7129-83) / 1 PATCH in 1 POUCH (0781-7129-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7129-83</NDC11Code>
<ProductNDC>0781-7129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7138-40</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (0781-7138-40) / 8 POUCH in 1 PACKET (0781-7138-83) / 1 PATCH in 1 POUCH (0781-7138-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7138-40</NDC11Code>
<ProductNDC>0781-7138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7138-83</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0781-7138-83) / 1 PATCH in 1 POUCH (0781-7138-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7138-83</NDC11Code>
<ProductNDC>0781-7138</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7144-40</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (0781-7144-40) / 8 POUCH in 1 PACKET (0781-7144-83) / 1 PATCH in 1 POUCH (0781-7144-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7144-40</NDC11Code>
<ProductNDC>0781-7144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7144-83</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0781-7144-83) / 1 PATCH in 1 POUCH (0781-7144-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7144-83</NDC11Code>
<ProductNDC>0781-7144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7156-40</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (0781-7156-40) / 8 POUCH in 1 PACKET (0781-7156-83) / 1 PATCH in 1 POUCH (0781-7156-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7156-40</NDC11Code>
<ProductNDC>0781-7156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7156-83</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0781-7156-83) / 1 PATCH in 1 POUCH (0781-7156-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7156-83</NDC11Code>
<ProductNDC>0781-7156</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7167-40</NDCCode>
<PackageDescription>3 PACKET in 1 CARTON (0781-7167-40) / 8 POUCH in 1 PACKET (0781-7167-83) / 1 PATCH in 1 POUCH (0781-7167-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7167-40</NDC11Code>
<ProductNDC>0781-7167</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0781-7167-83</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0781-7167-83) / 1 PATCH in 1 POUCH (0781-7167-58) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00781-7167-83</NDC11Code>
<ProductNDC>0781-7167</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>25357-025-03</NDCCode>
<PackageDescription>2 POUCH in 1 BOX (25357-025-03) / 1 POUCH in 1 POUCH / 1 SYRINGE, GLASS in 1 POUCH / 1 KIT in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>25357-0025-03</NDC11Code>
<ProductNDC>25357-025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Photrexa Cross-linking Kit</ProprietaryName>
<NonProprietaryName>Riboflavin 5-phosphate Ophthalmic</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20170925</StartMarketingDate>
<EndMarketingDate>20290731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203324</ApplicationNumber>
<LabelerName>Glaukos Corporation</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170925</StartMarketingDatePackage>
<EndMarketingDatePackage>20290731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PHOTREXA® VISCOUS and PHOTREXA® are indicated for use in corneal collagen cross-linking in combination with the KXL® System for the treatment of.</IndicationAndUsage>
<Description>PHOTREXA VISCOUS (riboflavin 5'-phosphate in 20% dextran ophthalmic solution) 0.146% and PHOTREXA (riboflavin 5'-phosphate ophthalmic solution) 0.146% are intended for topical ophthalmic administration as part of corneal collagen cross-linking with the KXL System. PHOTREXA VISCOUS and PHOTREXA are supplied as. PHOTREXA VISCOUS (riboflavin 5'-phosphate in 20% dextran ophthalmic solution) 0.146% is a yellow sterile buffered viscous solution containing 1.56 mg/mL riboflavin 5'-phosphate and 20% dextran. The pH of the solution is approximately 7.1 and the osmolality is 284-368 mOsm/kg. Each 1 mL of solution contains 1.64 mg of riboflavin 5'-phosphate sodium (equivalent to 1.284 mg riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are dibasic sodium phosphate dihydrate, dextran, monobasic sodium phosphate dihydrate, sodium chloride, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. PHOTREXA (riboflavin 5'-phosphate ophthalmic solution) 0.146% is a yellow sterile buffered solution containing 1.46 mg/mL riboflavin 5'-phosphate. The pH of the solution is approximately 7.1 and the osmolality is 157-181 mOsm/kg. Each 1 mL of solution contains 1.53 mg of riboflavin 5'-phosphate sodium (equivalent to 1.20 mg riboflavin). Riboflavin 5'-phosphate sodium is a mixture of the sodium salts of riboflavin, riboflavin monophosphates, and riboflavin diphosphates. The inactive ingredients are dibasic sodium phosphate dihydrate, monobasic sodium phosphate dihydrate, sodium chloride, and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The chemical formula for riboflavin 5'-phosphate sodium (Vitamin B2) is C17H20N4NaO9P with a molecular mass of 478.33 g/mol. Please refer to the KXL System Operator's Manual for a specific device description and instructions.</Description>
</NDC>
<NDC>
<NDCCode>33332-025-03</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (33332-025-03) / .5 mL in 1 SYRINGE, GLASS (33332-025-04) </PackageDescription>
<NDC11Code>33332-0025-03</NDC11Code>
<ProductNDC>33332-025</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Afluria</ProprietaryName>
<NonProprietaryName>Influenza A Virus A/victoria/4897/2022 Ivr-238 (h1n1) Antigen (propiolactone Inactivated), Influenza A Virus A/croatia/10136rv/2023 X-425a (h3n2) Antigen (propiolactone Inactivated), Influenza B Virus B/austria/1359417/2021 Bvr-26 Antigen (propiolactone Inactivated)</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20250701</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125254</ApplicationNumber>
<LabelerName>Seqirus PTY LTD.</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/VICTORIA/4897/2022 IVR-238 (H1N1) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA A VIRUS A/CROATIA/10136RV/2023 X-425A (H3N2) ANTIGEN (PROPIOLACTONE INACTIVATED); INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 ANTIGEN (PROPIOLACTONE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250701</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AFLURIA® is an inactivated influenza vaccine indicated for active immunization for the prevention of disease caused by influenza A subtype viruses and type B virus contained in the vaccine. AFLURIA is approved for use in persons 6 months of age and older.</IndicationAndUsage>
<Description>AFLURIA, Influenza Vaccine, is a sterile, clear, colorless to slightly opalescent injectable suspension for intramuscular use with some sediment that resuspends upon shaking to form a homogeneous suspension. AFLURIA is prepared from influenza viruses propagated in the allantoic fluid of embryonated chicken eggs. Following harvest, the viruses are purified in a sucrose density gradient using continuous flow zonal centrifugation. The purified viruses are inactivated with beta-propiolactone, and the virus particles are disrupted using sodium taurodeoxycholate to produce “split virions”. The disrupted viruses are further purified and suspended in a phosphate buffered isotonic solution. AFLURIA is standardized according to USPHS requirements for the 2025-2026 influenza season and is formulated to contain 45 mcg hemagglutinin (HA) per 0.5 mL dose in the recommended ratio of 15 mcg HA for each of the three influenza strains recommended for the 2025-2026 Northern Hemisphere influenza season:. A/Victoria/4897/2022 IVR-238 (an A/Victoria/4897/2022 (H1N1)pdm09-like virus);. A/Croatia/10136RV/2023 X-425A (an A/Croatia/10136RV/2023 (H3N2)-like virus); and. B/Austria/1359417/2021 BVR-26 (a B/Austria/1359417/2021-like virus). A 0.25 mL dose contains 7.5 mcg HA of each of the same influenza strains. Thimerosal, a mercury derivative, is not used in the manufacturing process for the single dose presentation. This presentation does not contain preservative. The multi-dose presentation contains thimerosal added as a preservative; each 0.5 mL dose contains 24.5 mcg of mercury and each 0.25 mL dose contains 12.25 mcg of mercury. A single 0.5 mL dose of AFLURIA contains sodium chloride (4.1 mg), monobasic sodium phosphate (80 mcg), dibasic sodium phosphate (300 mcg), monobasic potassium phosphate (20 mcg), potassium chloride (20 mcg), and calcium chloride (0.5 mcg). From the manufacturing process, each 0.5 mL dose may also contain residual amounts of sodium taurodeoxycholate (≤ 10 ppm), ovalbumin (< 1 mcg), sucrose (< 10 mcg), neomycin sulfate (≤ 61.5 nanograms [ng]), polymyxin B (≤ 10.5 ng), beta-propiolactone (< 2.3 ng) and hydrocortisone (≤ 0.56 ng). A single 0.25 mL dose of AFLURIA contains half of these quantities. The rubber tip cap and plunger used for the preservative-free, single-dose syringes and the rubber stoppers used for the multi-dose vial are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>53002-1807-1</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (53002-1807-1) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>53002-1807-01</NDC11Code>
<ProductNDC>53002-1807</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>53002-1808-1</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (53002-1808-1) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>53002-1808-01</NDC11Code>
<ProductNDC>53002-1808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39 g/mol. Estradiol transdermal system is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>54868-4242-0</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (54868-4242-0) > 1 PATCH in 1 POUCH > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>54868-4242-00</NDC11Code>
<ProductNDC>54868-4242</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle Dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20030610</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Vivelle-Dot® (estradiol transdermal system) is indicated in: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure., 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered. .</IndicationAndUsage>
<Description>Vivelle-Dot® (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. Vivelle-Dot is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>54868-4243-0</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (54868-4243-0) > 1 PATCH in 1 POUCH > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>54868-4243-00</NDC11Code>
<ProductNDC>54868-4243</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle Dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20030610</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Vivelle-Dot® (estradiol transdermal system) is indicated in: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure., 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered. .</IndicationAndUsage>
<Description>Vivelle-Dot® (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. Vivelle-Dot is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>54868-4244-0</NDCCode>
<PackageDescription>8 POUCH in 1 PACKET (54868-4244-0) > 1 PATCH in 1 POUCH > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>54868-4244-00</NDC11Code>
<ProductNDC>54868-4244</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vivelle Dot</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20030610</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020538</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Vivelle-Dot® (estradiol transdermal system) is indicated in: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered., 3 Treatment of hypoestrogenism due to hypogonadism, castration, or primary ovarian failure., 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered. .</IndicationAndUsage>
<Description>Vivelle-Dot® (estradiol transdermal system) contains estradiol in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of Vivelle-Dot are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains 0.39, 0.585, 0.78, 1.17, or 1.56 mg of estradiol USP, respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5 (10)-triene-3,17β-diol. The structural formula is. The molecular formula of estradiol is C18H2402. The molecular weight is 272.39. Vivelle-Dot is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film (2) an adhesive formulation containing estradiol, acrylic adhesive, silicone adhesive, oleyl alcohol, NF, povidone, USP and dipropylene glycol, and (3) a polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
</NDCList>