RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>84549-064-11</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (84549-064-11) </PackageDescription>
    <NDC11Code>84549-0064-11</NDC11Code>
    <ProductNDC>84549-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019316</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250917</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Magnesium Sulfate Injection, USP is suitable for replacement therapy in magnesium deficiency, especially in acute hypomagnesemia accompanied by signs of tetany similar to those observed in hypocalcemia.  In such cases, the serum magnesium level is usually below the lower limit of normal (1.5 to 2.5 mEq/L) and the serum calcium level is normal (4.3 to 5.3 mEq/L) or elevated. In total parenteral nutrition (TPN), magnesium sulfate may be added to the nutrient admixture to correct or prevent hypomagnesemia which can arise during the course of therapy. Magnesium sulfate injection is also indicated for the prevention and control of seizures in a pre-eclampsia and eclampsia, respectively.</IndicationAndUsage>
    <Description>Magnesium Sulfate Injection, USP 50% is a sterile, nonpyrogenic, concentrated solution of magnesium sulfate heptahydrate in Water for Injection.  It is administered by the intravenous (IV) or intramuscular (IM) routes as an electrolyte replenisher or anticonvulsant.  Must be diluted before IV use. Each mL contains:  Magnesium sulfate heptahydrate 500 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment.  The pH of a 5% solution is between 5.5 and 7.0. (Osmolarity: 4060 mOsmol/L (calc.); 2.03 mM/mL magnesium sulfate anhydrous; 4.06 mEq/mL magnesium sulfate anhydrous). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single dose injection.  When smaller doses are required the unused portion should be discarded with the entire unit. Magnesium sulfate heptahydrate is chemically designated MgSO 47H 2O, with a molecular weight of 246.47 and occurs as colorless crystals or white powder freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-064-03</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, SINGLE-DOSE (84549-064-03) </PackageDescription>
    <NDC11Code>84549-0064-03</NDC11Code>
    <ProductNDC>84549-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019316</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250625</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Magnesium Sulfate Injection, USP is suitable for replacement therapy in magnesium deficiency, especially in acute hypomagnesemia accompanied by signs of tetany similar to those observed in hypocalcemia.  In such cases, the serum magnesium level is usually below the lower limit of normal (1.5 to 2.5 mEq/L) and the serum calcium level is normal (4.3 to 5.3 mEq/L) or elevated. In total parenteral nutrition (TPN), magnesium sulfate may be added to the nutrient admixture to correct or prevent hypomagnesemia which can arise during the course of therapy. Magnesium sulfate injection is also indicated for the prevention and control of seizures in a pre-eclampsia and eclampsia, respectively.</IndicationAndUsage>
    <Description>Magnesium Sulfate Injection, USP 50% is a sterile, nonpyrogenic, concentrated solution of magnesium sulfate heptahydrate in Water for Injection.  It is administered by the intravenous (IV) or intramuscular (IM) routes as an electrolyte replenisher or anticonvulsant.  Must be diluted before IV use. Each mL contains:  Magnesium sulfate heptahydrate 500 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment.  The pH of a 5% solution is between 5.5 and 7.0. (Osmolarity: 4060 mOsmol/L (calc.); 2.03 mM/mL magnesium sulfate anhydrous; 4.06 mEq/mL magnesium sulfate anhydrous). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single dose injection.  When smaller doses are required the unused portion should be discarded with the entire unit. Magnesium sulfate heptahydrate is chemically designated MgSO 47H 2O, with a molecular weight of 246.47 and occurs as colorless crystals or white powder freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-414-11</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, SINGLE-DOSE (84549-414-11) </PackageDescription>
    <NDC11Code>84549-0414-11</NDC11Code>
    <ProductNDC>84549-414</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoclopramide</ProprietaryName>
    <NonProprietaryName>Metoclopramide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20060202</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA073118</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Dopamine D2 Antagonists [MoA], Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250918</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diabetic Gastroparesis (Diabetic Gastric Stasis). Metoclopramide is indicated for the relief of symptoms associated with acute and recurrent diabetic gastric stasis. The Prevention of Nausea and Vomiting Associated with Emetogenic Cancer Chemotherapy. Metoclopramide Injection, USP is indicated for the prophylaxis of vomiting associated with emetogenic cancer chemotherapy. The Prevention of Postoperative Nausea and Vomiting. Metoclopramide Injection, USP is indicated for the prophylaxis of postoperative nausea and vomiting in those circumstances where nasogastric suction is undesirable. Small Bowel Intubation. Metoclopramide Injection, USP may be used to facilitate small bowel intubation in adults and pediatric patients in whom the tube does not pass the pylorus with conventional maneuvers. Radiological Examination. Metoclopramide Injection, USP may be used to stimulate gastric emptying and intestinal transit of barium in cases where delayed emptying interferes with radiological examination of the stomach and/or small intestine.</IndicationAndUsage>
    <Description>Metoclopramide hydrochloride is a white or practically white, crystalline, odorless or practically odorless powder. It is very soluble in water, freely soluble in alcohol, sparingly soluble in chloroform, practically insoluble in ether. Chemically it is 4-amino-5-chloro-N-[2-(diethylamino)ethyl]-2-methoxybenzamide monohydrochloride monohydrate. It has the following structural formula:. Molecular formula: C 14H 22ClN 3O 2 HCl  H 2O. Metoclopramide Injection, USP is a sterile, nonpyrogenic solution of metoclopramide hydrochloride in water for injection. Each milliliter contains metoclopramide base 5 mg (as the hydrochloride monohydrate); 8.5 mg sodium chloride. May contain hydrochloric acid and/or sodium hydroxide for pH adjustment; pH 4.4 (2.5 to 6.5). The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended for use only as a single-dose injection. When smaller doses are required, the unused portion should be discarded. This product is light sensitive. It should be inspected before use and discarded if either color or particulate is observed. Metoclopramide Injection is intended for intravenous or intramuscular administration.</Description>
  </NDC>
  <NDC>
    <NDCCode>37205-064-11</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (37205-064-11)  &gt; 133 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>37205-0064-11</NDC11Code>
    <ProductNDC>37205-064</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Leader Enema Mineral Oil</ProprietaryName>
    <ProprietaryNameSuffix>Ready To Use</ProprietaryNameSuffix>
    <NonProprietaryName>Mineral Oil</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>RECTAL</RouteName>
    <StartMarketingDate>20091201</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part334</ApplicationNumber>
    <LabelerName>Cardinal Health</LabelerName>
    <SubstanceName>MINERAL OIL</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2017-12-27</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>46708-064-10</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (46708-064-10)  / 10 CAPSULE in 1 BLISTER PACK (46708-064-11) </PackageDescription>
    <NDC11Code>46708-0064-10</NDC11Code>
    <ProductNDC>46708-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rivastigmine Tartrate</ProprietaryName>
    <NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120613</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091689</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>RIVASTIGMINE TARTRATE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120613</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Rivastigmine tartrate capsules, are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild to moderate dementia of the Alzheimer’s type (1.1), 2 Mild to moderate dementia associated with Parkinson’s disease (1.2).</IndicationAndUsage>
    <Description>Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3.0. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate, equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides.</Description>
  </NDC>
  <NDC>
    <NDCCode>50268-064-15</NDCCode>
    <PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-064-15)  &gt; 1 TABLET in 1 BLISTER PACK (50268-064-11) </PackageDescription>
    <NDC11Code>50268-0064-15</NDC11Code>
    <ProductNDC>50268-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Allopurinol</ProprietaryName>
    <NonProprietaryName>Allopurinol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075798</ApplicationNumber>
    <LabelerName>AvPAK</LabelerName>
    <SubstanceName>ALLOPURINOL</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Xanthine Oxidase Inhibitor [EPC], Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-09-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-064-11</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-11)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-064-04) </PackageDescription>
    <NDC11Code>63323-0064-11</NDC11Code>
    <ProductNDC>63323-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019316</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000808</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Magnesium Sulfate Injection, USP is suitable for replacement therapy in magnesium deficiency, especially in acute hypomagnesemia accompanied by signs of tetany similar to those observed in hypocalcemia. In such cases, the serum magnesium level is usually below the lower limit of normal (1.5 to 2.5 mEq/L) and the serum calcium level is normal (4.3 to 5.3 mEq/L) or elevated. In total parenteral nutrition (TPN), magnesium sulfate may be added to the nutrient admixture to correct or prevent hypomagnesemia which can arise during the course of therapy. Magnesium sulfate injection is also indicated for the prevention and control of seizures in a pre-eclampsia and eclampsia, respectively.</IndicationAndUsage>
    <Description>Magnesium Sulfate Injection, USP 50% is a sterile, nonpyrogenic, concentrated solution of magnesium sulfate heptahydrate in Water for Injection. It is administered by the intravenous (IV) or intramuscular (IM) routes as an electrolyte replenisher or anticonvulsant. Must be diluted before IV use. Each mL contains: Magnesium sulfate heptahydrate 500 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment. The pH of a 5% solution is between 5.5 and 7.0. (Osmolarity: 4060 mOsmol/L (calc.); 2.03 mM/mL magnesium sulfate anhydrous; 4.06 mEq/mL magnesium sulfate anhydrous). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single dose injection. When smaller doses are required the unused portion should be discarded with the entire unit. Magnesium sulfate heptahydrate is chemically designated MgSO 47H 2O, with a molecular weight of 246.47 and occurs as colorless crystals or white powder freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>68084-064-01</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-064-01)  &gt; 1 TABLET in 1 BLISTER PACK (68084-064-11)</PackageDescription>
    <NDC11Code>68084-0064-01</NDC11Code>
    <ProductNDC>68084-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lisinopril</ProprietaryName>
    <NonProprietaryName>Lisinopril</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050922</StartMarketingDate>
    <EndMarketingDate>20151205</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078402</ApplicationNumber>
    <LabelerName>American Health Packaging</LabelerName>
    <SubstanceName>LISINOPRIL</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2015-12-11</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>71220-064-11</NDCCode>
    <PackageDescription>1 CONTAINER in 1 CARTON (71220-064-11)  &gt; 30 g in 1 CONTAINER</PackageDescription>
    <NDC11Code>71220-0064-11</NDC11Code>
    <ProductNDC>71220-064</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Matte Full Cover Foundation W27</ProprietaryName>
    <NonProprietaryName>Octinoxate</NonProprietaryName>
    <DosageFormName>LOTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20170623</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Innisfree Corporation</LabelerName>
    <SubstanceName>OCTINOXATE</SubstanceName>
    <StrengthNumber>.9</StrengthNumber>
    <StrengthUnit>g/30g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-10-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>84126-064-11</NDCCode>
    <PackageDescription>116 g in 1 CAN (84126-064-11) </PackageDescription>
    <NDC11Code>84126-0064-11</NDC11Code>
    <ProductNDC>84126-064</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Secret Original Dry Shower Fresh</ProprietaryName>
    <NonProprietaryName>Aluminum Chlorohydrate</NonProprietaryName>
    <DosageFormName>AEROSOL, SPRAY</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20240115</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M019</ApplicationNumber>
    <LabelerName>The Procter &amp; Gamble Manufacturing Company</LabelerName>
    <SubstanceName>ALUMINUM CHLOROHYDRATE ANHYDROUS</SubstanceName>
    <StrengthNumber>24.5</StrengthNumber>
    <StrengthUnit>g/100g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>reduces underarm wetness.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>84549-005-25</NDCCode>
    <PackageDescription>5 mL in 1 VIAL (84549-005-25) </PackageDescription>
    <NDC11Code>84549-0005-25</NDC11Code>
    <ProductNDC>84549-005</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20240501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217692</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGEsection for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C 14H 22N 2OHCl) has the following structural formula:. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-024-25</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, SINGLE-DOSE (84549-024-25) </PackageDescription>
    <NDC11Code>84549-0024-25</NDC11Code>
    <ProductNDC>84549-024</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mannitol</ProprietaryName>
    <NonProprietaryName>Mannitol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20000319</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA080677</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>MANNITOL</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Osmotic Activity [MoA], Osmotic Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Mannitol is a 6-carbon sugar alcohol and has the following structure. C6H14O6                                                            182.17. Mannitol occurs naturally in fruits and vegetables, and is metabolically inert in humans. Mannitol Injection, USP, 25%, an osmotic diuretic, is a sterile, nonpyrogenic solution of mannitol in Water for Injection.  It is a supersaturated solution at room temperature. Each mL contains: Mannitol 250 mg; Water for Injection q.s. The osmolar concentration is 1372 mOsmol/L (calc.).  It contains no antimicrobial agents.  The pH of a 5% solution is between 4.5 and 7.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-039-28</NDCCode>
    <PackageDescription>1 mL in 1 VIAL (84549-039-28) </PackageDescription>
    <NDC11Code>84549-0039-28</NDC11Code>
    <ProductNDC>84549-039</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solu-medrol</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19590402</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA011856</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular useof SOLU-MEDROL Sterile Powder is indicated as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>SOLU-MEDROL Sterile Powder is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. SOLU-MEDROL is available in preservative and preservative-free formulations. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-047-22</NDCCode>
    <PackageDescription>2 mL in 1 VIAL (84549-047-22) </PackageDescription>
    <NDC11Code>84549-0047-22</NDC11Code>
    <ProductNDC>84549-047</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solu-medrol</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19590402</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA011856</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250827</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular useof SOLU-MEDROL Sterile Powder is indicated as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>SOLU-MEDROL Sterile Powder is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. SOLU-MEDROL is available in preservative and preservative-free formulations. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-093-25</NDCCode>
    <PackageDescription>2 mL in 1 VIAL (84549-093-25) </PackageDescription>
    <NDC11Code>84549-0093-25</NDC11Code>
    <ProductNDC>84549-093</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Phenytoin Sodium</ProprietaryName>
    <NonProprietaryName>Phenytoin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19750716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA084307</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>PHENYTOIN SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C8 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inducers [MoA], Cytochrome P450 3A Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral Phenytoin Sodium Injection is indicated for the treatment of generalized tonic-clonic status epilepticus, and prevention and treatment of seizures occurring during neurosurgery. Intravenous phenytoin can also be substituted, as short-term use, for oral phenytoin. Parenteral phenytoin should be used only when oral phenytoin administration is not possible [see Dosage and Administration (2.1,  2.3) and Warnings and Precautions (5.1)] .</IndicationAndUsage>
    <Description>Phenytoin Sodium Injection, USP is a sterile solution containing in each mL phenytoin sodium 50 mg, propylene glycol 0.4 mL and alcohol 0.1 mL in Water for Injection. pH 10.0-12.3; sodium hydroxide added, if needed, for pH adjustment. Phenytoin sodium is related to the barbiturates in chemical structure, but has a five-membered ring. The chemical name is sodium 5,5-diphenyl-2,4-imidazolidinedione represented by the following structural formula. C 15H 11N 2NaO 2           MW 274.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-117-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, SINGLE-DOSE (84549-117-10) </PackageDescription>
    <NDC11Code>84549-0117-10</NDC11Code>
    <ProductNDC>84549-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040279</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with: 1 Adenocarcinoma of the Colon and Rectum, 2 Adenocarcinoma of the Breast, 3 Gastric Adenocarcinoma, 4 Pancreatic Adenocarcinoma.</IndicationAndUsage>
    <Description>Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1 H,3 H)-pyrimidinedione. Its structural formula is:. C 4H 3FN 2O 2               M.W. 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-131-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (84549-131-10) </PackageDescription>
    <NDC11Code>84549-0131-10</NDC11Code>
    <ProductNDC>84549-131</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rocuronium Bromide</ProprietaryName>
    <NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20241003</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216234</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
    <Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The structural formula is:. The chemical formula is C 32H 53BrN 2O 4with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow or orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-141-10</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (84549-141-10) </PackageDescription>
    <NDC11Code>84549-0141-10</NDC11Code>
    <ProductNDC>84549-141</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rocuronium Bromide</ProprietaryName>
    <NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230712</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216234</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
    <Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl) pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow or orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-155-20</NDCCode>
    <PackageDescription>20 mL in 1 VIAL, SINGLE-DOSE (84549-155-20) </PackageDescription>
    <NDC11Code>84549-0155-20</NDC11Code>
    <ProductNDC>84549-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir Sodium</ProprietaryName>
    <NonProprietaryName>Acyclovir Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20131011</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203701</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>ACYCLOVIR SODIUM</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/20mL</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250827</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acyclovir Sodium Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.</IndicationAndUsage>
    <Description>Acyclovir Sodium Injection is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Sodium Injection in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula:. Acyclovir USP is a white to off-white, crystalline powder. Acyclovir sodium is the sodium salt of acyclovir, which is formed in situ, with the molecular formula C 8H 10N 5NaO 3and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-204-42</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, GLASS (84549-204-42) </PackageDescription>
    <NDC11Code>84549-0204-42</NDC11Code>
    <ProductNDC>84549-204</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20190711</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210842</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In Anesthesia. Glycopyrrolate Injection, USP is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection, USP may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults to reduce symptoms of a peptic ulcer as an adjunct to treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated. : 1 Limitations of Use.</IndicationAndUsage>
    <Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains. Glycopyrrolate, USP 0.2 mg. Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative). pH adjusted, when necessary, with hydrochloric acid. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name. 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C 19H 28BrNO 3and the molecular weight is 398.33. Its structural formula is as follows. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log 10P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-300-24</NDCCode>
    <PackageDescription>200 mL in 1 BAG (84549-300-24) </PackageDescription>
    <NDC11Code>84549-0300-24</NDC11Code>
    <ProductNDC>84549-300</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ciprofloxacin In Dextrose</ProprietaryName>
    <NonProprietaryName>Ciprofloxacin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20221201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078252</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>CIPROFLOXACIN</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/200mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ciprofloxacin Injection is a fluoroquinolone antibacterial indicated in adults (≥18 years of age) with the following infections caused by designated, susceptible bacteria and in pediatric patients where indicated: 1 Skin and Skin Structure Infections ( 1.1) , 2 Bone and Joint Infections ( 1.2) , 3 Complicated Intra-Abdominal Infections ( 1.3) , 4 Nosocomial Pneumonia ( 1.4) , 5 Empirical Therapy for Febrile Neutropenic Patients ( 1.5) , 6 Inhalational Anthrax Post-Exposure in Adult and Pediatric Patients ( 1.6) , 7 Plague in Adult and Pediatric Patients ( 1.7) , 8 Chronic Bacterial Prostatitis ( 1.8) , 9 Lower Respiratory Tract Infections ( 1.9) Acute Exacerbation of Chronic Bronchitis, 10 Urinary Tract Infections ( 1.10) Urinary Tract Infections (UTI)Complicated UTI and Pyelonephritis in Pediatric Patients, 11 Acute Sinusitis ( 1.11) .</IndicationAndUsage>
    <Description>Ciprofloxacin Injection, USP (in 5% Dextrose Injection) is a synthetic antimicrobial agent for intravenous (IV) administration. Ciprofloxacin, a fluoroquinolone, is 1-cyclopropyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinolinecarboxylic acid. Its empirical formula is C 17H 18FN 3O 3and its chemical structure is:. Ciprofloxacin is a faint to light yellow crystalline powder with a molecular weight of 331.4. It is soluble in dilute (0.1N) hydrochloric acid and is practically insoluble in water and ethanol. Ciprofloxacin Injection, USP solution is a sterile 0.2% readyfor-use infusion solution in 5% Dextrose Injection. The formula contains lactic acid 0.644 mg per mL as a solubilizing agent and hydrochloric acid for pH adjustment. The pH range for the 0.2% ready-for-use infusion solutions is 3.5 to 4.6. The plastic container is not made with natural rubber latex and is fabricated from specially formulated polyolefin based material. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period. The suitability of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies. The glucose content for the 100 mL bag is 5 g and 10 g for the 200 mL flexible container.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-421-30</NDCCode>
    <PackageDescription>30 mL in 1 VIAL (84549-421-30) </PackageDescription>
    <NDC11Code>84549-0421-30</NDC11Code>
    <ProductNDC>84549-421</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
    <NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
    <StartMarketingDate>20110511</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040803</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250827</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Severe erythema multiforme. (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye, such as. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Keratitis. Allergic corneal marginal ulcers. 7. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory Diseases. Symptomatic sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic Disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (IV only; IM administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 11. Edematous States. To induce diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Miscellaneous. Tuberculosis meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. 13. Diagnostic testing of adrenocortical hyperfunction. 14. Cerebral Edemaassociated with primary or metastatic brain tumor, craniotomy, or head injury. Use in cerebral edema is not a substitute for careful neurosurgical evaluation and definitive management such as neurosurgery or other specific therapy.</IndicationAndUsage>
    <Description>Dexamethasone sodium phosphate, a synthetic adrenocortical steroid, is a white or slightly yellow, crystalline powder. It is freely soluble in water and is exceedingly hygroscopic. The molecular weight is 516.41. It is designated chemically as 9-fluoro-11β,17-dihydroxy-16α-methyl-21-(phosphonooxy)pregna-1,4-diene-3,20-dione disodium salt. The empirical formula is C 22H 28FNa 2O 8P and the structural formula is:. Dexamethasone sodium phosphate injection, USP is a sterile solution of dexamethasone sodium phosphate, and is supplied in 4 mg/ mL and 10 mg /mL. Dexamethasone sodium phosphate injection, USP 4 mg/mL is a sterile solution for intravenous, intramuscular, intra-articular, intralesional and soft tissue administration. Each mL contains. Active:Dexamethasone sodium phosphate 4.4 mg (equivalent to dexamethasone phosphate 4 mg). Preservatives:Methylparaben 1.5 mg; Propylparaben 0.2 mg. Inactives:Edetate Disodium 0.11 mg; Sodium Citrate Anhydrous 10 mg; Citric Acid and/or Sodium Hydroxide q.s to adjust pH 7.0 to 8.5 and Water for Injection q.s to 1 mL. Dexamethasone sodium phosphate injection, USP 10 mg/mL is a sterile solution for intravenous or intramuscular use only. Each mL contains. Actives:Dexamethasone sodium phosphate 11 mg (equivalent to dexamethasone phosphate 10 mg). Preservatives:Methylparaben 1.5 mg; Propylparaben 0.2 mg. Inactives:Edetate Disodium 0.11 mg; Sodium Citrate Anhydrous 10 mg; Citric Acid and/or Sodium Hydroxide q.s to adjust pH 7.0 to 8.5 and Water for Injection q.s to 1 mL.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-422-54</NDCCode>
    <PackageDescription>5 mL in 1 VIAL (84549-422-54) </PackageDescription>
    <NDC11Code>84549-0422-54</NDC11Code>
    <ProductNDC>84549-422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
    <NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; INTRAVENOUS; SOFT TISSUE</RouteName>
    <StartMarketingDate>20110511</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040803</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1. Endocrine disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance). Acute adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; mineralocorticoid supplementation may be necessary, particularly when synthetic analogs are used). Preoperatively, and in the event of serious trauma or illness, in patients with known adrenal insufficiency or when adrenocortical reserve is doubtful. Shock unresponsive to conventional therapy if adrenocortical insufficiency exists or is suspected. Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Acute and subacute bursitis. Epicondylitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Psoriatic arthritis. Ankylosing spondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Severe erythema multiforme. (Stevens-Johnson Syndrome). Exfoliative dermatitis. Bullous dermatitis herpetiformis. Severe seborrheic dermatitis. Severe psoriasis. Mycosis fungoides. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Seasonal or perennial allergic rhinitis. Drug hypersensitivity reactions. Urticarial transfusion reactions. Acute noninfectious laryngeal edema (epinephrine is the drug of first choice). 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye, such as. Herpes zoster ophthalmicus. Iritis, iridocyclitis. Chorioretinitis. Diffuse posterior uveitis and choroiditis. Optic neuritis. Sympathetic ophthalmia. Anterior segment inflammation. Allergic conjunctivitis. Keratitis. Allergic corneal marginal ulcers. 7. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis (systemic therapy). Regional enteritis (systemic therapy). 8. Respiratory Diseases. Symptomatic sarcoidosis. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Loeffler's syndrome not manageable by other means. Aspiration pneumonitis. 9. Hematologic Disorders. Acquired (autoimmune) hemolytic anemia. Idiopathic thrombocytopenic purpura in adults (IV only; IM administration is contraindicated). Secondary thrombocytopenia in adults. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 10. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 11. Edematous States. To induce diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 12. Miscellaneous. Tuberculosis meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. 13. Diagnostic testing of adrenocortical hyperfunction. 14. Cerebral Edemaassociated with primary or metastatic brain tumor, craniotomy, or head injury. Use in cerebral edema is not a substitute for careful neurosurgical evaluation and definitive management such as neurosurgery or other specific therapy.</IndicationAndUsage>
    <Description>Dexamethasone sodium phosphate, a synthetic adrenocortical steroid, is a white or slightly yellow, crystalline powder. It is freely soluble in water and is exceedingly hygroscopic. The molecular weight is 516.41. It is designated chemically as 9-fluoro-11β,17-dihydroxy-16α-methyl-21-(phosphonooxy)pregna-1,4-diene-3,20-dione disodium salt. The empirical formula is C 22H 28FNa 2O 8P and the structural formula is:. Dexamethasone sodium phosphate injection, USP is a sterile solution of dexamethasone sodium phosphate, and is supplied in 4 mg/ mL and 10 mg /mL. Dexamethasone sodium phosphate injection, USP 4 mg/mL is a sterile solution for intravenous, intramuscular, intra-articular, intralesional and soft tissue administration. Each mL contains. Active:Dexamethasone sodium phosphate 4.4 mg (equivalent to dexamethasone phosphate 4 mg). Preservatives:Methylparaben 1.5 mg; Propylparaben 0.2 mg. Inactives:Edetate Disodium 0.11 mg; Sodium Citrate Anhydrous 10 mg; Citric Acid and/or Sodium Hydroxide q.s to adjust pH 7.0 to 8.5 and Water for Injection q.s to 1 mL. Dexamethasone sodium phosphate injection, USP 10 mg/mL is a sterile solution for intravenous or intramuscular use only. Each mL contains. Actives:Dexamethasone sodium phosphate 11 mg (equivalent to dexamethasone phosphate 10 mg). Preservatives:Methylparaben 1.5 mg; Propylparaben 0.2 mg. Inactives:Edetate Disodium 0.11 mg; Sodium Citrate Anhydrous 10 mg; Citric Acid and/or Sodium Hydroxide q.s to adjust pH 7.0 to 8.5 and Water for Injection q.s to 1 mL.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-474-25</NDCCode>
    <PackageDescription>10 mL in 1 VIAL (84549-474-25) </PackageDescription>
    <NDC11Code>84549-0474-25</NDC11Code>
    <ProductNDC>84549-474</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203428</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations. Edema:Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired. Furosemide is indicated as adjunctive therapy in acute pulmonary edema. The intravenous administration of furosemide is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema. If gastrointestinal absorption is impaired or oral medication is not practical for any reason, furosemide is indicated by the intravenous or intramuscular route. Parenteral use should be replaced with oral furosemide as soon as practical.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-chloro -N-furfuryl-5-sulfamoylanthranilic acid. Furosemide Injection 10 mg/mL is a sterile, non-pyrogenic solution in vials for intravenous and intramuscular injection. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Molecular Formula:                                                                  Molecular Weight. C 12H 11ClN 2O 5S                                                                         330.74. Each mL contains: Furosemide USP 10 mg, Water for Injection q.s., Sodium Chloride for isotonicity, Sodium Hydroxide and, if necessary, Hydrochloric Acid to adjust pH between 8.0 and 9.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-493-95</NDCCode>
    <PackageDescription>20 mL in 1 VIAL (84549-493-95) </PackageDescription>
    <NDC11Code>84549-0493-95</NDC11Code>
    <ProductNDC>84549-493</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexmedetomidine Hydrochloride In 0.9% Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Dexmedetomidine Hydrochloride In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200612</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209065</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is a alpha 2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer dexmedetomidine hydrochloride in 0.9% sodium chloride injection by continuous infusion not to exceed 24 hours. (1.1), 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. (1.2).</IndicationAndUsage>
    <Description>Dexmedetomidine hydrochloride in 0.9% sodium chloride injection (4 mcg per mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine hydrochloride in 0.9% sodium chloride injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-505-03</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, SINGLE-DOSE (84549-505-03) </PackageDescription>
    <NDC11Code>84549-0505-03</NDC11Code>
    <ProductNDC>84549-505</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexmedetomidine</ProprietaryName>
    <NonProprietaryName>Dexmedetomidine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190118</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204843</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>ug/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dexmedetomidine Injection is a alpha 2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting. Administer Dexmedetomidine Injection by continuous infusion not to exceed 24 hours. ( 1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures. ( 1.2) .</IndicationAndUsage>
    <Description>Dexmedetomidine Injection, USP (100 mcg per mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-535-50</NDCCode>
    <PackageDescription>500 mL in 1 BAG (84549-535-50) </PackageDescription>
    <NDC11Code>84549-0535-50</NDC11Code>
    <ProductNDC>84549-535</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Intralipid</ProprietaryName>
    <NonProprietaryName>I.v. Fat Emulsion</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20040401</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018449</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>SOYBEAN OIL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Lipid Emulsion [EPC], Lipids [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intralipid ®is indicated as a source of calories and essential fatty acids for adult and pediatric patients requiring parenteral nutrition (PN) and as a source of essential fatty acids for prevention of essential fatty acid deficiency (EFAD).</IndicationAndUsage>
    <Description>Intralipid is a sterile, non-pyrogenic, white, homogenous lipid emulsion for intravenous infusion as a source of calories and essential fatty acids. The lipid content of Intralipid is 0.2 g/mL and comprises soybean oil. The phosphate content is 15 mmol/L. The total energy content, including fat, phospholipids, and glycerin is 2,000 kcal/L. Each 100 mL of Intralipid contains approximately 20 g soybean oil, 1.2 g egg yolk phospholipids, 2.25 g glycerin, water for injection, and sodium hydroxide for pH adjustment (pH 6 to 8.9). Intralipid has an osmolality of approximately 350 mOsmol/kg water (which represents an osmolarity of 260 mOsmoL/L). The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. where are saturated and unsaturated fatty acid residues. The major component fatty acids in Intralipid are linoleic acid (44% to 62%), oleic acid (19% to 30%), palmitic acid (7% to 14%), alpha-linolenic acid (4% to 11%), and stearic acid (1.4% to 5.5%). These fatty acids have the following chemical and structural formulas. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure. contain saturated and unsaturated fatty acids that abound in neutral fats. R 3is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C 3H 8O 3and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. Intralipid contains no more than 25 mcg/L of aluminum. The container is not made with natural rubber latex, PVC, or DEHP.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-977-03</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (84549-977-03) </PackageDescription>
    <NDC11Code>84549-0977-03</NDC11Code>
    <ProductNDC>84549-977</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bacteriostatic Water</ProprietaryName>
    <NonProprietaryName>Bacteriostatic Water</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20050430</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018802</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mL/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251010</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
    <Description>The following preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Bacteriostatic Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection containing 0.9% (9 mg/mL) or 1.1% (11 mg/mL) of benzyl alcohol added as a bacteriostatic preservative. It is supplied in a multiple-dose container from which repeated withdrawals may be made to dilute or dissolve drugs for injection. The pH is 5.7 (4.5 to 7.0). Water for Injection, USP is chemically designated H 2O. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume.</Description>
  </NDC>
  <NDC>
    <NDCCode>11559-064-01</NDCCode>
    <PackageDescription>1 JAR in 1 CARTON (11559-064-01)  / 50 mL in 1 JAR</PackageDescription>
    <NDC11Code>11559-0064-01</NDC11Code>
    <ProductNDC>11559-064</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Daywear Advanced Multi-protection Anti-oxidant 24h-moisture Creme Broad Spectrum Spf15</ProprietaryName>
    <NonProprietaryName>Avobenzone, Homosalate, Octisalate</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20231113</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M020</ApplicationNumber>
    <LabelerName>ESTEE LAUDER INC</LabelerName>
    <SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE</SubstanceName>
    <StrengthNumber>30; 20; 50</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-11-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>-helps precent sunburn. -if used as directed with other sun protection measures (see Directions) decreases the risk of skin cancer and early skin aging cause by the seun.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>11673-318-77</NDCCode>
    <PackageDescription>.5 L in 1 BOTTLE, PLASTIC (11673-318-77)</PackageDescription>
    <NDC11Code>11673-0318-77</NDC11Code>
    <ProductNDC>11673-318</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Antiseptic</ProprietaryName>
    <NonProprietaryName>Eucalyptol, Menthol, Methyl Salicylate, Thymol</NonProprietaryName>
    <DosageFormName>MOUTHWASH</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19960715</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part356</ApplicationNumber>
    <LabelerName>Target Corporation</LabelerName>
    <SubstanceName>EUCALYPTOL; MENTHOL; METHYL SALICYLATE; THYMOL</SubstanceName>
    <StrengthNumber>.092; .042; .06; .064</StrengthNumber>
    <StrengthUnit>kg/100L; kg/100L; kg/100L; kg/100L</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-11-21</LastUpdate>
  </NDC>
</NDCList>