{
"NDC": [
{
"NDCCode": "84549-399-05",
"PackageDescription": "10 mL in 1 SYRINGE (84549-399-05) ",
"NDC11Code": "84549-0399-05",
"ProductNDC": "84549-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procainamide Hydrochloride",
"NonProprietaryName": "Procainamide Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20161221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088636",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "PROCAINAMIDE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Procainamide hydrochloride injection is indicated for the treatment of documented ventricular arrhythmias, such as sustained ventricular tachycardia, that, in the judgement of the physician, are life-threatening. Because of the proarrhythmic effects of procainamide, its use with lesser arrhythmias is generally not recommended. Treatment of patients with asymptomatic ventricular premature contractions should be avoided. Initiation of procainamide treatment, as with other antiarrhythmic agents used to treat life-threatening arrhythmias, should be carried out in the hospital. Antiarrhythmic drugs have not been shown to enhance survival in patients with ventricular arrhythmias. Because procainamide has the potential to produce serious hematological disorders (0.5 percent) particularly leukopenia or agranulocytosis (sometimes fatal), its use should be reserved for patients in whom, in the opinion of the physician, the benefits of treatment clearly outweigh the risks. (see WARNINGSand Boxed Warning.).",
"Description": "Procainamide Hydrochloride Injection, USP, is a sterile, nonpyrogenic solution of procainamide hydrochloride in Water for Injection. It is available in 100 mg per mL concentration. The 100 mg per mL potency contains 0.9% w/v benzyl alcohol and 0.09% sodium bisulfite as preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.0 (4.0 to 6.0). Headspace nitrogen gassed. Procainamide hydrochloride, a Group 1A cardiac antiarrhythmic drug, is ρ-amino-N-[2-(diethylamino) ethyl] benzamide mono-hydrochloride. It has the following structural formula. M.W. 271.79. *(locus for acetylation to N-acetyl procainamide). It differs from procaine which is the p-aminobenzoyl ester of 2-(diethylamino)-ethanol. Procainamide as the free base has a pK aof 9.23; the monohydrochloride is very soluble in water."
},
{
"NDCCode": "84549-066-05",
"PackageDescription": "5 mL in 1 VIAL, SINGLE-DOSE (84549-066-05) ",
"NDC11Code": "84549-0066-05",
"ProductNDC": "84549-066",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20050907",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040078",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260119",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine HCl injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine hydrochloride has the chemical name of acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-,monohydrochloride and has the molecular weight of 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Each single-dose vial contains Lidocaine Hydrochloride Injection, USP, which is a sterile nonpyrogenic aqueous solution intended for parenteral administration as a local anesthetic agent. See INDICATIONS AND USAGEfor special uses. Each mL contains 20 mg lidocaine hydrochloride and 6 mg sodium chloride, in Water for Injection. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH between 5.0 and 7.0."
},
{
"NDCCode": "84549-130-05",
"PackageDescription": "2 mL in 1 VIAL, SINGLE-USE (84549-130-05) ",
"NDC11Code": "84549-0130-05",
"ProductNDC": "84549-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203711",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron Injection is a 5-HT 3receptor antagonist indicated for the prevention of: : 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. ( 1.1) , 2 postoperative nausea and/or vomiting. ( 1.2) .",
"Description": "The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT 3receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula:. The empirical formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2-mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9.0 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0."
},
{
"NDCCode": "84549-137-05",
"PackageDescription": "5 mL in 1 SYRINGE, PLASTIC (84549-137-05) ",
"NDC11Code": "84549-0137-05",
"ProductNDC": "84549-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20050706",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040302",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250919",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection administered intravenously or intramuscularly, is specifically indicated in the acute management of ventricular arrhythmias such as those occurring in relation to acute myocardial infarction, or during cardiac manipulation, such as cardiac surgery.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C 14H 22N 2O HCl H 2O. The molecular weight is 288.82. It has the following structural formula:. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material."
},
{
"NDCCode": "84549-142-05",
"PackageDescription": "1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (84549-142-05) ",
"NDC11Code": "84549-0142-05",
"ProductNDC": "84549-142",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin",
"NonProprietaryName": "Cefazolin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20170630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203661",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Cefazolin for Injection, USP is indicated in the treatment of the following serious infections due to susceptible organisms. Respiratory Tract Infections:Due to S. pneumoniae, Klebsiellaspecies , H. influenzae, S. aureus(penicillin-sensitive and penicillin-resistant), and group A beta-hemolytic streptococci . Injectable benzathine penicillin is considered to be the drug of choice in treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cefazolin for Injection, USP is effective in the eradication of streptococci from the nasopharynx; however, data establishing the efficacy of Cefazolin for Injection, USP in the subsequent prevention of rheumatic fever are not available at present. Urinary Tract Infections:Due to E. coli, P. mirabilis, Klebsiellaspecies, and some strains of enterobacter and enterococci . Skin and Skin Structure Infections: Due to S. aureus(penicillin-sensitive and penicillin-resistant), group A beta-hemolytic streptococci, and other strains of streptococci. Biliary Tract Infections:Due to E. coli,various strains of streptococci, P. mirabilis, Klebsiellaspecies, and S. aureus. Bone and Joint Infections:Due to S. aureus. Genital Infections:(i.e., prostatitis, epididymitis) due to E. coli, P. mirabilis, Klebsiellaspecies, and some strains of enterococci . Septicemia: Due to S. pneumoniae, S. aureus(penicillin-sensitive and penicillin-resistant), P. mirabilis, E. coli,and Klebsiellaspecies. Endocarditis: Due to S. aureus(penicillin-sensitive and penicillin-resistant) and group A beta-hemolytic streptococci . Perioperative Prophylaxis:The prophylactic administration of Cefazolin for Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of certain postoperative infections in patients undergoing surgical procedures which are classified as contaminated or potentially contaminated (e.g., vaginal hysterectomy, and cholecystectomy in high-risk patients such as those older than 70 years, with acute cholecystitis, obstructive jaundice, or common duct bile stones). The perioperative use of Cefazolin for Injection, USP may also be effective in surgical patients in whom infection at the operative site would present a serious risk (e.g., during open-heart surgery and prosthetic arthroplasty). The prophylactic administration of Cefazolin for Injection, USP should usually be discontinued within a 24-hour period after the surgical procedure. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection, USP may be continued for 3 to 5 days following the completion of surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism so that appropriate therapy may be instituted. (See DOSAGE AND ADMINISTRATION.). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cefazolin for Injection, USP and other antibacterial drugs, Cefazolin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cefazolin for Injection, USP is a semi-synthetic cephalosporin for parenteral administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl) acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Structural Formula. The sodium content is 48 mg (2 mEq sodium ion) per 1 gram of cefazolin. Cefazolin for Injection, USP is a sterile white or off-white powder or crystalline powder containing Cefazolin Sodium USP supplied in vials equivalent to 1 gram，2 grams or 3 grams of cefazolin."
},
{
"NDCCode": "84549-319-05",
"PackageDescription": "5 mL in 1 VIAL (84549-319-05) ",
"NDC11Code": "84549-0319-05",
"ProductNDC": "84549-319",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074617",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250918",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride injection is indicated for the following.",
"Description": "Diltiazem Hydrochloride Injection is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5 H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)- cis-. The structural formula is:. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem Hydrochloride Injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains 5 mg of diltiazem hydrochloride, 0.75 mg citric acid (hydrous), USP, 0.65 mg sodium citrate dihydrate, USP, 71.4 mg sorbitol solution, USP, and water for injection, USP. Sodium hydroxide or hydrochloric acid is used for pH adjustment."
},
{
"NDCCode": "84549-323-05",
"PackageDescription": "5 mL in 1 SYRINGE, PLASTIC (84549-323-05) ",
"NDC11Code": "84549-0323-05",
"ProductNDC": "84549-323",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040302",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250827",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection administered intravenously or intramuscularly, is specifically indicated in the acute management of ventricular arrhythmias such as those occurring in relation to acute myocardial infarction, or during cardiac manipulation, such as cardiac surgery.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C 14H 22N 2O HCl H 2O. The molecular weight is 288.82. It has the following structural formula:. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material."
},
{
"NDCCode": "84549-687-05",
"PackageDescription": "5 mL in 1 VIAL (84549-687-05) ",
"NDC11Code": "84549-0687-05",
"ProductNDC": "84549-687",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rocuronium Bromide",
"NonProprietaryName": "Rocuronium Bromide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205656",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "ROCURONIUM BROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260723",
"SamplePackage": "N",
"IndicationAndUsage": "Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide."
},
{
"NDCCode": "84549-778-05",
"PackageDescription": "5 mL in 1 VIAL, SINGLE-DOSE (84549-778-05) ",
"NDC11Code": "84549-0778-05",
"ProductNDC": "84549-778",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Tartrate",
"NonProprietaryName": "Metoprolol Tartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20080724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078085",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "METOPROLOL TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250916",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol tartrate Injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.",
"Description": "Metoprolol tartrate Injection, USP, is a selective beta 1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol (2:1) dextro-tartrate salt, and its structural formula is:. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.83. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether."
},
{
"NDCCode": "84549-781-05",
"PackageDescription": "1 mL in 1 VIAL, SINGLE-USE (84549-781-05) ",
"NDC11Code": "84549-0781-05",
"ProductNDC": "84549-781",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRA-ARTERIAL; INTRAMUSCULAR",
"StartMarketingDate": "20220502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213543",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250908",
"SamplePackage": "N",
"IndicationAndUsage": "Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular useas follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders:Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases:To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders:Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous:Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases:For the palliative management of leukemias and lymphomas. Nervous system:Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders:As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol."
},
{
"NDCCode": "29300-399-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (29300-399-05) ",
"NDC11Code": "29300-0399-05",
"ProductNDC": "29300-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210811",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213359",
"LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210811",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white crystals or white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.62. It is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone, and in methylene chloride. The pKa of metformin hydrochloride is 2.8 and 11.5. The pH of a 5% aqueous solution of metformin hydrochloride is between 6 and 7. Metformin hydrochloride extended-release tablets, USP contain 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin hydrochloride extended-release tablets, USP 500 mg and 750 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Meets USP Dissolution Test 22."
},
{
"NDCCode": "42961-399-05",
"PackageDescription": "250 PACKET in 1 BOX (42961-399-05) / 2 TABLET in 1 PACKET (42961-399-01) ",
"NDC11Code": "42961-0399-05",
"ProductNDC": "42961-399",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Xpect Acetaminophen",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210330",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Cintas Corporation",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210330",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: headache, the common cold, backache, minor pain of arthritis, toothache, muscular aches, premenstrual and menstrual cramps. temporarily reduces fever ."
},
{
"NDCCode": "43602-399-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-399-05) ",
"NDC11Code": "43602-0399-05",
"ProductNDC": "43602-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Citrate",
"NonProprietaryName": "Potassium Citrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214420",
"LabelerName": "Ascent Pharmaceuticals Inc",
"SubstanceName": "POTASSIUM CITRATE",
"StrengthNumber": "5",
"StrengthUnit": "meq/1",
"Pharm_Classes": "Acidifying Activity [MoA], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210215",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium Citrate extended-release tablets are a citrate salt of potassium indicated for the management of: 1 Renal tubular acidosis (RTA) with calcium stones (1.1), 2 Hypocitraturic calcium oxalate nephrolithiasis of any etiology (1.2), 3 Uric acid lithiasis with or without calcium stones (1.3).",
"Description": "Potassium Citrate extended release tablets are a citrate salt of potassium. Its empirical formula is K3C6H5O7 H2O, and it has the following chemical structure. Potassium Citrate extended release tablets are off white to tan yellowish, oral wax-matrix tablets, contain 5 mEq (540 mg) potassium citrate, 10 mEq (1080 mg) potassium citrate and 15 mEq (1620 mg) potassium citrate each. Inactive ingredients include carnauba wax, silicon dioxide and magnesium stearate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "49643-399-05",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49643-399-05) ",
"NDC11Code": "49643-0399-05",
"ProductNDC": "49643-399",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Black Cottonwood Pollen",
"NonProprietaryName": "Populus Trichocarpa",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "POPULUS TRICHOCARPA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "55111-399-05",
"PackageDescription": "500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (55111-399-05) ",
"NDC11Code": "55111-0399-05",
"ProductNDC": "55111-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20101015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091269",
"LabelerName": "Dr.Reddy's Laboratories Ltd.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-05-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101015",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release capsule is a proton pump inhibitor (PPIs) indicated for the:. Treatment of active duodenal ulcer in adults. (1.1). Eradication of H. pylori to reduce the risk of duodenal ulcer. recurrence in adults. (1.2). Maintenance of healed duodenal ulcers in adults. (1.3). Treatment of active benign gastric ulcer in adults. (1.4). Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5). Risk reduction of NSAID-associated gastric ulcer in adults. (1.6). Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older.(1.7). Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8). Maintenance of healing of EE in adults. (1.9). Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release capsules USP is lansoprazole USP, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl] methyl] sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole USP has the following structure:. Lansoprazole USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole USP is freely soluble in dimethylformamide and practically insoluble in water. Lansoprazole USP is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole USP is supplied as delayed-release capsules for oral adminsitration. The delayed-release capsules are available in two dosage strengths: 15 mg and 30 mg of lansoprazole USP per capsule. Each delayed-release capsule contains enteric-coated granules consisting of 15 mg or 30 mg of lansoprazole USP (active ingredient) and the following inactive ingredients: ammonium hydroxide, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, propylene glycol, shellac, simethicone, starch, sucrose, sugar spheres, talc, and titanium dioxide. Components of the gelatin capsule include gelatin, iron oxide red, iron oxide yellow, FD&C Blue 2, sodium lauryl sulphate and titanium dioxide for 15 mg capsules and gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulphate and titanium dioxide for 30 mg capsules."
},
{
"NDCCode": "63730-399-05",
"PackageDescription": "100 mL in 1 CARTON (63730-399-05)",
"NDC11Code": "63730-0399-05",
"ProductNDC": "63730-399",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "The Cure Sheer Cream",
"NonProprietaryName": "Octinoxate, Titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170308",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Natura Bisse International",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "2; 4",
"StrengthUnit": "mg/50mL; g/50mL",
"Status": "Deprecated",
"LastUpdate": "2019-06-18",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "68428-399-05",
"PackageDescription": "150 PELLET in 1 VIAL, GLASS (68428-399-05) ",
"NDC11Code": "68428-0399-05",
"ProductNDC": "68428-399",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Galphimia Glauca",
"NonProprietaryName": "Galphimia Glauca Flowering Top",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100215",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "GALPHIMIA GLAUCA FLOWERING TOP",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20100215",
"SamplePackage": "N",
"IndicationAndUsage": "Indications. GALPHIMIA Sneezing."
},
{
"NDCCode": "69837-399-05",
"PackageDescription": "1 TUBE in 1 CARTON (69837-399-05) > 150 mL in 1 TUBE",
"NDC11Code": "69837-0399-05",
"ProductNDC": "69837-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202027",
"LabelerName": "International Brand Management, LLC",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "16.05",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Active ingredient: diclofenac sodium 16.05 mg. Excipients: alcohol (11.3%), dimethyl sulfoxide. glycerin, propylene glycol, purified water."
},
{
"NDCCode": "69837-500-05",
"PackageDescription": "1 KIT in 1 KIT (69837-500-05) * 1 TUBE in 1 KIT (69837-399-05) > 150 mL in 1 TUBE * 1 CARTON in 1 KIT > 118 g in 1 CARTON (69837-210-10)",
"NDC11Code": "69837-0500-05",
"ProductNDC": "69837-500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sure Result Dss Premium Pak",
"NonProprietaryName": "Diclofenac Sodium, Capsaicin",
"DosageFormName": "KIT",
"StartMarketingDate": "20160210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202027",
"LabelerName": "International Brand Management, LLC",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "84525-399-05",
"PackageDescription": "100 mL in 1 BOTTLE (84525-399-05) ",
"NDC11Code": "84525-0399-05",
"ProductNDC": "84525-399",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "The Organic Avocado Anti Wrinkle Essence",
"NonProprietaryName": "The Organic Avocado Anti Wrinkle Essence",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250111",
"EndMarketingDate": "20310111",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Ziqiu Import Export Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250111",
"EndMarketingDatePackage": "20310111",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "84756-399-05",
"PackageDescription": "100 g in 1 BOX (84756-399-05) ",
"NDC11Code": "84756-0399-05",
"ProductNDC": "84756-399",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Trstay Moisturizing Smoothes Wrinkles",
"NonProprietaryName": "Trstay Moisturizing Smoothes Wrinkles",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241122",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "Yiwu Luoxin E �Commerce Co Ltd",
"SubstanceName": "MINOXIDIL",
"StrengthNumber": "5",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241122",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "84827-399-05",
"PackageDescription": "100 mL in 1 BOX (84827-399-05) ",
"NDC11Code": "84827-0399-05",
"ProductNDC": "84827-399",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Beard Oil Softening With Argan Oil",
"NonProprietaryName": "Beard Oil Softening With Argan Oil",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241104",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "Yiwu Ziqiu Import Export Co Ltd",
"SubstanceName": "MINOXIDIL",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241104",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "84549-003-67",
"PackageDescription": "60 mL in 1 VIAL, GLASS (84549-003-67) ",
"NDC11Code": "84549-0003-67",
"ProductNDC": "84549-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Revonto",
"NonProprietaryName": "Dantrolene Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078378",
"LabelerName": "ProPharma Distribution",
"SubstanceName": "DANTROLENE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/60mL",
"Pharm_Classes": "Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250915",
"SamplePackage": "N",
"IndicationAndUsage": "Revonto(dantrolene sodium for injection) is indicated, along with appropriate supportive measures, for the management of the fulminant hypermetabolism of skeletal muscle characteristic of malignant hyperthermia crises in patients of all ages. Revontoshould be administered by continuous rapid intravenous push as soon as the malignant hyperthermia reaction is recognized (i.e., tachycardia, tachypnea, central venous desaturation, hypercarbia, metabolic acidosis, skeletal muscle rigidity, increased utilization of anesthesia circuit carbon dioxide absorber, cyanosis and mottling of the skin, and, in many cases, fever). Revontois also indicated preoperatively, and sometimes postoperatively, to prevent or attenuate the development of clinical and laboratory signs of malignant hyperthermia in individuals judged to be malignant hyperthermia susceptible.",
"Description": "Revontois a sterile, non-pyrogenic, lyophilized formulation of dantrolene sodium for injection. Revontois supplied in 65 mL vials containing 20 mg dantrolene sodium, 3000 mg mannitol, and sufficient sodium hydroxide to yield a pH of approximately 9.5 when reconstituted with 60 ml sterile water for injection USP (without a bacteriostatic agent). Dantrolene sodium is classified as a direct-acting skeletal muscle relaxant. Chemically, dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl] methylene] amino]-2,4- imidazolidinedione sodium salt. The structural formula for the hydrated salt is. The hydrated salt contains approximately 15% water (3.5 moles) and has a molecular weight of 399. The anhydrous salt (dantrolene) has a molecular weight of 336."
},
{
"NDCCode": "13310-119-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (13310-119-05)",
"NDC11Code": "13310-0119-05",
"ProductNDC": "13310-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colcrys",
"NonProprietaryName": "Colchicine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022352",
"LabelerName": "AR Scientific Inc.",
"SubstanceName": "COLCHICINE",
"StrengthNumber": ".6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Interactions [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "COLCRYS (colchicine, USP) tablets are an alkaloid indicated for: 1 Prophylaxis and Treatment of Gout Flares in adults (1.1)., 2 Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).",
"Description": "Colchicine is an alkaloid chemically described as (S)N- (5,6,7,9-tetrahydro- 1,2,3, 10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine occurs as a pale yellow powder that is soluble in water. COLCRYS® (colchicine, USP) tablets are supplied for oral administration as purple, film-coated, capsule-shaped tablets (0.1575\" × 0.3030\"), debossed with 'AR 374' on one side and scored on the other, containing 0.6 mg of the active ingredient colchicine USP. Inactive ingredients: carnauba wax, FD&C blue #2, FD&C red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide, and triacetin."
},
{
"NDCCode": "16714-399-01",
"PackageDescription": "50 TABLET, FILM COATED in 1 BOTTLE (16714-399-01) ",
"NDC11Code": "16714-0399-01",
"ProductNDC": "16714-399",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefprozil",
"NonProprietaryName": "Cefprozil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065340",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "CEFPROZIL",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-05-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070524",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefprozil and other antibacterial drugs, cefprozil should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefprozil tablets are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below:UPPER RESPIRATORY TRACT Pharyngitis/tonsillitis caused by Streptococcus pyogenes. NOTE: The usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever, is penicillin given by the intramuscular route. Cefprozil is generally effective in the eradication of Streptococcus pyogenes from the nasopharynx; however, substantial data establishing the efficacy of cefprozil in the subsequent prevention of rheumatic fever are not available at present. Otitis Media caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). (See CLINICAL STUDIES.) NOTE: In the treatment of otitis media due to β-lactamase producing organisms, cefprozil had bacteriologic eradication rates somewhat lower than those observed with a product containing a specific β-lactamase inhibitor. In considering the use of cefprozil, lower overall eradication rates should be balanced against the susceptibility patterns of the common microbes in a given geographic area and the increased potential for toxicity with products containing β-lactamase inhibitors. Acute Sinusitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). LOWER RESPIRATORY TRACT Acute Bacterial Exacerbation of Chronic Bronchitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). SKIN AND SKIN STRUCTURE Uncomplicated Skin and Skin-Structure Infections caused by Staphylococcus aureus (including penicillinase-producing strains) and Streptococcus pyogenes. Abscesses usually require surgical drainage.",
"Description": "Cefprozil is a semi-synthetic broad-spectrum cephalosporin antibiotic.Cefprozil is a cis and trans isomeric mixture (≥90% cis). The chemical name for the monohydrate is (6R,7R)-7-[(R)-2-Amino-2-(p-hydroxyphenyl) acetamido]-8-oxo-3-propenyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid monohydrate, and the structural formula is. Cefprozil USP is a white to yellowish powder with a molecular formula for the monohydrate of C18H19N3O5SH2O and a molecular weight of 407.45. Cefprozil tablets USP are intended for oral administration.Cefprozil tablets USP contain cefprozil USP equivalent to 250 mg or 500 mg of anhydrous cefprozil. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, magnesium stearate, hypromellose, polyethylene glycol, polysorbate 80, and titanium dioxide. The 250 mg tablets also contain FD&C Yellow #6 aluminum lake. The tablets are imprinted with edible ink containing shellac glaze, black iron oxide, propylene glycol and ammonium hydroxide."
},
{
"NDCCode": "16729-549-10",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (16729-549-10) ",
"NDC11Code": "16729-0549-10",
"ProductNDC": "16729-549",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate",
"NonProprietaryName": "Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20200901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209069",
"LabelerName": "Accord Healthcare, Inc",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "2; .5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2023-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and naloxone sublingual tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and naloxone sublingual tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and Naloxone Sublingual Tablets, USP are uncoated white to off-white, round biconvex tablets, debossed with an alpha-numeric imprint identifying the product and strength on one side, and plain on the other. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). They are intended for sublingual administration and are available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains citric acid anhydrous, crospovidone, lactose monohydrate, magnesium stearate, mannitol, corn syrup solids, modified food starch, natural lemon flavor, pregelatinized starch (maize), povidone, sodium citrate dihydrate, and sucralose. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4HCl2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "16729-550-10",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (16729-550-10) ",
"NDC11Code": "16729-0550-10",
"ProductNDC": "16729-550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate",
"NonProprietaryName": "Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20200901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209069",
"LabelerName": "Accord Healthcare, Inc",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2023-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and naloxone sublingual tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and naloxone sublingual tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and Naloxone Sublingual Tablets, USP are uncoated white to off-white, round biconvex tablets, debossed with an alpha-numeric imprint identifying the product and strength on one side, and plain on the other. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). They are intended for sublingual administration and are available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains citric acid anhydrous, crospovidone, lactose monohydrate, magnesium stearate, mannitol, corn syrup solids, modified food starch, natural lemon flavor, pregelatinized starch (maize), povidone, sodium citrate dihydrate, and sucralose. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4HCl2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "31722-479-30",
"PackageDescription": "30 POUCH in 1 CARTON (31722-479-30) / 1 FILM, SOLUBLE in 1 POUCH (31722-479-31) ",
"NDC11Code": "31722-0479-30",
"ProductNDC": "31722-479",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine And Naloxone",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "FILM, SOLUBLE",
"RouteName": "BUCCAL; SUBLINGUAL",
"StartMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219850",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE",
"StrengthNumber": "2; .5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium, citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "31722-480-30",
"PackageDescription": "30 POUCH in 1 CARTON (31722-480-30) / 1 FILM, SOLUBLE in 1 POUCH (31722-480-31) ",
"NDC11Code": "31722-0480-30",
"ProductNDC": "31722-480",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine And Naloxone",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "FILM, SOLUBLE",
"RouteName": "BUCCAL; SUBLINGUAL",
"StartMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219850",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE",
"StrengthNumber": "4; 1",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium, citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "31722-481-30",
"PackageDescription": "30 POUCH in 1 CARTON (31722-481-30) / 1 FILM, SOLUBLE in 1 POUCH (31722-481-31) ",
"NDC11Code": "31722-0481-30",
"ProductNDC": "31722-481",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine And Naloxone",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "FILM, SOLUBLE",
"RouteName": "BUCCAL; SUBLINGUAL",
"StartMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219850",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium, citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>84549-399-05</NDCCode>
<PackageDescription>10 mL in 1 SYRINGE (84549-399-05) </PackageDescription>
<NDC11Code>84549-0399-05</NDC11Code>
<ProductNDC>84549-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procainamide Hydrochloride</ProprietaryName>
<NonProprietaryName>Procainamide Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20161221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088636</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>PROCAINAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Procainamide hydrochloride injection is indicated for the treatment of documented ventricular arrhythmias, such as sustained ventricular tachycardia, that, in the judgement of the physician, are life-threatening. Because of the proarrhythmic effects of procainamide, its use with lesser arrhythmias is generally not recommended. Treatment of patients with asymptomatic ventricular premature contractions should be avoided. Initiation of procainamide treatment, as with other antiarrhythmic agents used to treat life-threatening arrhythmias, should be carried out in the hospital. Antiarrhythmic drugs have not been shown to enhance survival in patients with ventricular arrhythmias. Because procainamide has the potential to produce serious hematological disorders (0.5 percent) particularly leukopenia or agranulocytosis (sometimes fatal), its use should be reserved for patients in whom, in the opinion of the physician, the benefits of treatment clearly outweigh the risks. (see WARNINGSand Boxed Warning.).</IndicationAndUsage>
<Description>Procainamide Hydrochloride Injection, USP, is a sterile, nonpyrogenic solution of procainamide hydrochloride in Water for Injection. It is available in 100 mg per mL concentration. The 100 mg per mL potency contains 0.9% w/v benzyl alcohol and 0.09% sodium bisulfite as preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.0 (4.0 to 6.0). Headspace nitrogen gassed. Procainamide hydrochloride, a Group 1A cardiac antiarrhythmic drug, is ρ-amino-N-[2-(diethylamino) ethyl] benzamide mono-hydrochloride. It has the following structural formula. M.W. 271.79. *(locus for acetylation to N-acetyl procainamide). It differs from procaine which is the p-aminobenzoyl ester of 2-(diethylamino)-ethanol. Procainamide as the free base has a pK aof 9.23; the monohydrochloride is very soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>84549-066-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL, SINGLE-DOSE (84549-066-05) </PackageDescription>
<NDC11Code>84549-0066-05</NDC11Code>
<ProductNDC>84549-066</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20050907</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040078</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine HCl injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine hydrochloride has the chemical name of acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-,monohydrochloride and has the molecular weight of 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Each single-dose vial contains Lidocaine Hydrochloride Injection, USP, which is a sterile nonpyrogenic aqueous solution intended for parenteral administration as a local anesthetic agent. See INDICATIONS AND USAGEfor special uses. Each mL contains 20 mg lidocaine hydrochloride and 6 mg sodium chloride, in Water for Injection. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH between 5.0 and 7.0.</Description>
</NDC>
<NDC>
<NDCCode>84549-130-05</NDCCode>
<PackageDescription>2 mL in 1 VIAL, SINGLE-USE (84549-130-05) </PackageDescription>
<NDC11Code>84549-0130-05</NDC11Code>
<ProductNDC>84549-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203711</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron Injection is a 5-HT 3receptor antagonist indicated for the prevention of: : 1 nausea and vomiting associated with initial and repeat courses of emetogenic cancer chemotherapy. ( 1.1) , 2 postoperative nausea and/or vomiting. ( 1.2) .</IndicationAndUsage>
<Description>The active ingredient of Ondansetron Injection, USP is ondansetron hydrochloride, a selective blocking agent of the serotonin 5-HT 3receptor type. Its chemical name is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula:. The empirical formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.9 g/mol. Ondansetron HCl is a white to off-white powder that is soluble in water and normal saline. Each 1 mL of aqueous solution in the 2-mL single-dose vial contains 2 mg of ondansetron as the hydrochloride dihydrate; 9.0 mg of sodium chloride, USP; 0.5 mg of citric acid monohydrate, USP and 0.25 mg of sodium citrate dihydrate, USP as buffers in Water for Injection. Ondansetron Injection, USP is a clear, colorless, nonpyrogenic, sterile solution for intravenous use. The pH of the injection solution is 3.3 to 4.0.</Description>
</NDC>
<NDC>
<NDCCode>84549-137-05</NDCCode>
<PackageDescription>5 mL in 1 SYRINGE, PLASTIC (84549-137-05) </PackageDescription>
<NDC11Code>84549-0137-05</NDC11Code>
<ProductNDC>84549-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20050706</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040302</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection administered intravenously or intramuscularly, is specifically indicated in the acute management of ventricular arrhythmias such as those occurring in relation to acute myocardial infarction, or during cardiac manipulation, such as cardiac surgery.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C 14H 22N 2O HCl H 2O. The molecular weight is 288.82. It has the following structural formula:. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material.</Description>
</NDC>
<NDC>
<NDCCode>84549-142-05</NDCCode>
<PackageDescription>1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (84549-142-05) </PackageDescription>
<NDC11Code>84549-0142-05</NDC11Code>
<ProductNDC>84549-142</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin</ProprietaryName>
<NonProprietaryName>Cefazolin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20170630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203661</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefazolin for Injection, USP is indicated in the treatment of the following serious infections due to susceptible organisms. Respiratory Tract Infections:Due to S. pneumoniae, Klebsiellaspecies , H. influenzae, S. aureus(penicillin-sensitive and penicillin-resistant), and group A beta-hemolytic streptococci . Injectable benzathine penicillin is considered to be the drug of choice in treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cefazolin for Injection, USP is effective in the eradication of streptococci from the nasopharynx; however, data establishing the efficacy of Cefazolin for Injection, USP in the subsequent prevention of rheumatic fever are not available at present. Urinary Tract Infections:Due to E. coli, P. mirabilis, Klebsiellaspecies, and some strains of enterobacter and enterococci . Skin and Skin Structure Infections: Due to S. aureus(penicillin-sensitive and penicillin-resistant), group A beta-hemolytic streptococci, and other strains of streptococci. Biliary Tract Infections:Due to E. coli,various strains of streptococci, P. mirabilis, Klebsiellaspecies, and S. aureus. Bone and Joint Infections:Due to S. aureus. Genital Infections:(i.e., prostatitis, epididymitis) due to E. coli, P. mirabilis, Klebsiellaspecies, and some strains of enterococci . Septicemia: Due to S. pneumoniae, S. aureus(penicillin-sensitive and penicillin-resistant), P. mirabilis, E. coli,and Klebsiellaspecies. Endocarditis: Due to S. aureus(penicillin-sensitive and penicillin-resistant) and group A beta-hemolytic streptococci . Perioperative Prophylaxis:The prophylactic administration of Cefazolin for Injection, USP preoperatively, intraoperatively, and postoperatively may reduce the incidence of certain postoperative infections in patients undergoing surgical procedures which are classified as contaminated or potentially contaminated (e.g., vaginal hysterectomy, and cholecystectomy in high-risk patients such as those older than 70 years, with acute cholecystitis, obstructive jaundice, or common duct bile stones). The perioperative use of Cefazolin for Injection, USP may also be effective in surgical patients in whom infection at the operative site would present a serious risk (e.g., during open-heart surgery and prosthetic arthroplasty). The prophylactic administration of Cefazolin for Injection, USP should usually be discontinued within a 24-hour period after the surgical procedure. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection, USP may be continued for 3 to 5 days following the completion of surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism so that appropriate therapy may be instituted. (See DOSAGE AND ADMINISTRATION.). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cefazolin for Injection, USP and other antibacterial drugs, Cefazolin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cefazolin for Injection, USP is a semi-synthetic cephalosporin for parenteral administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl) acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. Structural Formula. The sodium content is 48 mg (2 mEq sodium ion) per 1 gram of cefazolin. Cefazolin for Injection, USP is a sterile white or off-white powder or crystalline powder containing Cefazolin Sodium USP supplied in vials equivalent to 1 gram，2 grams or 3 grams of cefazolin.</Description>
</NDC>
<NDC>
<NDCCode>84549-319-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL (84549-319-05) </PackageDescription>
<NDC11Code>84549-0319-05</NDC11Code>
<ProductNDC>84549-319</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074617</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250918</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride injection is indicated for the following.</IndicationAndUsage>
<Description>Diltiazem Hydrochloride Injection is a calcium ion influx inhibitor (slow channel blocker or calcium channel antagonist). Chemically, diltiazem hydrochloride is 1,5-benzothiazepin-4(5 H)one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)- cis-. The structural formula is:. Diltiazem hydrochloride is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Diltiazem hydrochloride injection is a clear, colorless, sterile, nonpyrogenic solution. It has a pH range of 3.7 to 4.1. Diltiazem Hydrochloride Injection is for direct intravenous bolus injection and continuous intravenous infusion. Each mL contains 5 mg of diltiazem hydrochloride, 0.75 mg citric acid (hydrous), USP, 0.65 mg sodium citrate dihydrate, USP, 71.4 mg sorbitol solution, USP, and water for injection, USP. Sodium hydroxide or hydrochloric acid is used for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>84549-323-05</NDCCode>
<PackageDescription>5 mL in 1 SYRINGE, PLASTIC (84549-323-05) </PackageDescription>
<NDC11Code>84549-0323-05</NDC11Code>
<ProductNDC>84549-323</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040302</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection administered intravenously or intramuscularly, is specifically indicated in the acute management of ventricular arrhythmias such as those occurring in relation to acute myocardial infarction, or during cardiac manipulation, such as cardiac surgery.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic solution of an antiarrhythmic agent administered intravenously by either direct injection or continuous infusion. It is available in various concentrations with the following characteristics. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Injections containing 10 mg/mL (1%) contain sodium chloride 7 mg and injections containing 20 mg/mL (2%) lidocaine hydrochloride contain sodium chloride 6 mg to adjust tonicity. Single-dose solutions contain no preservative and unused portions must be discarded after use. Lidocaine Hydrochloride, USP is chemically designated 2-(Diethylamino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. The molecular formula is C 14H 22N 2O HCl H 2O. The molecular weight is 288.82. It has the following structural formula:. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material.</Description>
</NDC>
<NDC>
<NDCCode>84549-687-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL (84549-687-05) </PackageDescription>
<NDC11Code>84549-0687-05</NDC11Code>
<ProductNDC>84549-687</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rocuronium Bromide</ProprietaryName>
<NonProprietaryName>Rocuronium Bromide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205656</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>ROCURONIUM BROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rocuronium bromide injection is indicated for inpatients and outpatients as an adjunct to general anesthesia to facilitate both rapid sequence and routine tracheal intubation, and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Rocuronium bromide injection is a nondepolarizing neuromuscular blocking agent with a rapid to intermediate onset depending on dose and intermediate duration. Rocuronium bromide is chemically designated as 1-[17β-(acetyloxy)-3α-hydroxy-2β-(4-morpholinyl)-5α-androstan-16β-yl]-1-(2-propenyl)pyrrolidinium bromide. The structural formula is. The chemical formula is C 32H 53BrN 2O 4with a molecular weight of 609.70. The partition coefficient of rocuronium bromide in n-octanol/water is 0.5 at 20°C. Rocuronium bromide is supplied as a sterile, nonpyrogenic, isotonic solution that is clear, colorless to yellow/orange, for intravenous injection only. Each mL contains 10 mg rocuronium bromide and 2 mg sodium acetate. The aqueous solution is adjusted to isotonicity with sodium chloride and to a pH of 4 with acetic acid and/or sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>84549-778-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL, SINGLE-DOSE (84549-778-05) </PackageDescription>
<NDC11Code>84549-0778-05</NDC11Code>
<ProductNDC>84549-778</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Tartrate</ProprietaryName>
<NonProprietaryName>Metoprolol Tartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20080724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078085</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>METOPROLOL TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250916</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol tartrate Injection is indicated in the treatment of definite or suspected acute myocardial infarction in hemodynamically stable patients to reduce cardiovascular mortality when used in conjunction with oral metoprolol maintenance therapy.</IndicationAndUsage>
<Description>Metoprolol tartrate Injection, USP, is a selective beta 1-adrenoreceptor blocking agent, available in 5 mL vials for intravenous administration. Each vial contains a sterile solution of metoprolol tartrate USP, 5 mg, and sodium chloride USP, 45 mg. Metoprolol tartrate USP is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol (2:1) dextro-tartrate salt, and its structural formula is:. Metoprolol tartrate USP is a white, practically odorless, crystalline powder with a molecular weight of 684.83. It is very soluble in water; freely soluble in methylene chloride, in chloroform, and in alcohol; slightly soluble in acetone; and insoluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>84549-781-05</NDCCode>
<PackageDescription>1 mL in 1 VIAL, SINGLE-USE (84549-781-05) </PackageDescription>
<NDC11Code>84549-0781-05</NDC11Code>
<ProductNDC>84549-781</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTERIAL; INTRAMUSCULAR</RouteName>
<StartMarketingDate>20220502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213543</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension, USP is indicated for intramuscular useas follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders:Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases:To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders:Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous:Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases:For the palliative management of leukemias and lymphomas. Nervous system:Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases:Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases:To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases:Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders:As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THIS FORMULATION IS SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THIS FORMULATION IS NOT FOR INTRADERMAL INJECTION. Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, with 0.66% sodium chloride for isotonicity, 0.99% (w/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen. The chemical name for triamcinolone acetonide is 9-Fluoro-11β, 16α,17,21-tetrahydroxypregna-1,4-diene- 3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. MW 434.50. Triamcinolone acetonide occurs as a white to cream-colored, crystalline powder having not more than a slight odor and is practically insoluble in water and very soluble in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>29300-399-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (29300-399-05) </PackageDescription>
<NDC11Code>29300-0399-05</NDC11Code>
<ProductNDC>29300-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210811</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213359</ApplicationNumber>
<LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210811</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white crystals or white crystalline powder with a molecular formula of C4H11N5 HCl and a molecular weight of 165.62. It is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone, and in methylene chloride. The pKa of metformin hydrochloride is 2.8 and 11.5. The pH of a 5% aqueous solution of metformin hydrochloride is between 6 and 7. Metformin hydrochloride extended-release tablets, USP contain 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin hydrochloride extended-release tablets, USP 500 mg and 750 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Meets USP Dissolution Test 22.</Description>
</NDC>
<NDC>
<NDCCode>42961-399-05</NDCCode>
<PackageDescription>250 PACKET in 1 BOX (42961-399-05) / 2 TABLET in 1 PACKET (42961-399-01) </PackageDescription>
<NDC11Code>42961-0399-05</NDC11Code>
<ProductNDC>42961-399</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Xpect Acetaminophen</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Cintas Corporation</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: headache, the common cold, backache, minor pain of arthritis, toothache, muscular aches, premenstrual and menstrual cramps. temporarily reduces fever .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43602-399-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-399-05) </PackageDescription>
<NDC11Code>43602-0399-05</NDC11Code>
<ProductNDC>43602-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Citrate</ProprietaryName>
<NonProprietaryName>Potassium Citrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214420</ApplicationNumber>
<LabelerName>Ascent Pharmaceuticals Inc</LabelerName>
<SubstanceName>POTASSIUM CITRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>meq/1</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium Citrate extended-release tablets are a citrate salt of potassium indicated for the management of: 1 Renal tubular acidosis (RTA) with calcium stones (1.1), 2 Hypocitraturic calcium oxalate nephrolithiasis of any etiology (1.2), 3 Uric acid lithiasis with or without calcium stones (1.3).</IndicationAndUsage>
<Description>Potassium Citrate extended release tablets are a citrate salt of potassium. Its empirical formula is K3C6H5O7 H2O, and it has the following chemical structure. Potassium Citrate extended release tablets are off white to tan yellowish, oral wax-matrix tablets, contain 5 mEq (540 mg) potassium citrate, 10 mEq (1080 mg) potassium citrate and 15 mEq (1620 mg) potassium citrate each. Inactive ingredients include carnauba wax, silicon dioxide and magnesium stearate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>49643-399-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-399-05) </PackageDescription>
<NDC11Code>49643-0399-05</NDC11Code>
<ProductNDC>49643-399</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Black Cottonwood Pollen</ProprietaryName>
<NonProprietaryName>Populus Trichocarpa</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>POPULUS TRICHOCARPA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>55111-399-05</NDCCode>
<PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (55111-399-05) </PackageDescription>
<NDC11Code>55111-0399-05</NDC11Code>
<ProductNDC>55111-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091269</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Ltd.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-05-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release capsule is a proton pump inhibitor (PPIs) indicated for the:. Treatment of active duodenal ulcer in adults. (1.1). Eradication of H. pylori to reduce the risk of duodenal ulcer. recurrence in adults. (1.2). Maintenance of healed duodenal ulcers in adults. (1.3). Treatment of active benign gastric ulcer in adults. (1.4). Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5). Risk reduction of NSAID-associated gastric ulcer in adults. (1.6). Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older.(1.7). Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8). Maintenance of healing of EE in adults. (1.9). Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release capsules USP is lansoprazole USP, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl] methyl] sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole USP has the following structure:. Lansoprazole USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole USP is freely soluble in dimethylformamide and practically insoluble in water. Lansoprazole USP is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole USP is supplied as delayed-release capsules for oral adminsitration. The delayed-release capsules are available in two dosage strengths: 15 mg and 30 mg of lansoprazole USP per capsule. Each delayed-release capsule contains enteric-coated granules consisting of 15 mg or 30 mg of lansoprazole USP (active ingredient) and the following inactive ingredients: ammonium hydroxide, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, propylene glycol, shellac, simethicone, starch, sucrose, sugar spheres, talc, and titanium dioxide. Components of the gelatin capsule include gelatin, iron oxide red, iron oxide yellow, FD&C Blue 2, sodium lauryl sulphate and titanium dioxide for 15 mg capsules and gelatin, iron oxide black, iron oxide red, iron oxide yellow, sodium lauryl sulphate and titanium dioxide for 30 mg capsules.</Description>
</NDC>
<NDC>
<NDCCode>63730-399-05</NDCCode>
<PackageDescription>100 mL in 1 CARTON (63730-399-05)</PackageDescription>
<NDC11Code>63730-0399-05</NDC11Code>
<ProductNDC>63730-399</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>The Cure Sheer Cream</ProprietaryName>
<NonProprietaryName>Octinoxate, Titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170308</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Natura Bisse International</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>2; 4</StrengthNumber>
<StrengthUnit>mg/50mL; g/50mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-06-18</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>68428-399-05</NDCCode>
<PackageDescription>150 PELLET in 1 VIAL, GLASS (68428-399-05) </PackageDescription>
<NDC11Code>68428-0399-05</NDC11Code>
<ProductNDC>68428-399</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Galphimia Glauca</ProprietaryName>
<NonProprietaryName>Galphimia Glauca Flowering Top</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100215</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>GALPHIMIA GLAUCA FLOWERING TOP</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications. GALPHIMIA Sneezing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69837-399-05</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (69837-399-05) > 150 mL in 1 TUBE</PackageDescription>
<NDC11Code>69837-0399-05</NDC11Code>
<ProductNDC>69837-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202027</ApplicationNumber>
<LabelerName>International Brand Management, LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>16.05</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Active ingredient: diclofenac sodium 16.05 mg. Excipients: alcohol (11.3%), dimethyl sulfoxide. glycerin, propylene glycol, purified water.</Description>
</NDC>
<NDC>
<NDCCode>69837-500-05</NDCCode>
<PackageDescription>1 KIT in 1 KIT (69837-500-05) * 1 TUBE in 1 KIT (69837-399-05) > 150 mL in 1 TUBE * 1 CARTON in 1 KIT > 118 g in 1 CARTON (69837-210-10)</PackageDescription>
<NDC11Code>69837-0500-05</NDC11Code>
<ProductNDC>69837-500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sure Result Dss Premium Pak</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium, Capsaicin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20160210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202027</ApplicationNumber>
<LabelerName>International Brand Management, LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>84525-399-05</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (84525-399-05) </PackageDescription>
<NDC11Code>84525-0399-05</NDC11Code>
<ProductNDC>84525-399</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>The Organic Avocado Anti Wrinkle Essence</ProprietaryName>
<NonProprietaryName>The Organic Avocado Anti Wrinkle Essence</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250111</StartMarketingDate>
<EndMarketingDate>20310111</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250111</StartMarketingDatePackage>
<EndMarketingDatePackage>20310111</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84756-399-05</NDCCode>
<PackageDescription>100 g in 1 BOX (84756-399-05) </PackageDescription>
<NDC11Code>84756-0399-05</NDC11Code>
<ProductNDC>84756-399</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Trstay Moisturizing Smoothes Wrinkles</ProprietaryName>
<NonProprietaryName>Trstay Moisturizing Smoothes Wrinkles</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241122</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>Yiwu Luoxin E �Commerce Co Ltd</LabelerName>
<SubstanceName>MINOXIDIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84827-399-05</NDCCode>
<PackageDescription>100 mL in 1 BOX (84827-399-05) </PackageDescription>
<NDC11Code>84827-0399-05</NDC11Code>
<ProductNDC>84827-399</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Beard Oil Softening With Argan Oil</ProprietaryName>
<NonProprietaryName>Beard Oil Softening With Argan Oil</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241104</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
<SubstanceName>MINOXIDIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84549-003-67</NDCCode>
<PackageDescription>60 mL in 1 VIAL, GLASS (84549-003-67) </PackageDescription>
<NDC11Code>84549-0003-67</NDC11Code>
<ProductNDC>84549-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Revonto</ProprietaryName>
<NonProprietaryName>Dantrolene Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078378</ApplicationNumber>
<LabelerName>ProPharma Distribution</LabelerName>
<SubstanceName>DANTROLENE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/60mL</StrengthUnit>
<Pharm_Classes>Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Revonto(dantrolene sodium for injection) is indicated, along with appropriate supportive measures, for the management of the fulminant hypermetabolism of skeletal muscle characteristic of malignant hyperthermia crises in patients of all ages. Revontoshould be administered by continuous rapid intravenous push as soon as the malignant hyperthermia reaction is recognized (i.e., tachycardia, tachypnea, central venous desaturation, hypercarbia, metabolic acidosis, skeletal muscle rigidity, increased utilization of anesthesia circuit carbon dioxide absorber, cyanosis and mottling of the skin, and, in many cases, fever). Revontois also indicated preoperatively, and sometimes postoperatively, to prevent or attenuate the development of clinical and laboratory signs of malignant hyperthermia in individuals judged to be malignant hyperthermia susceptible.</IndicationAndUsage>
<Description>Revontois a sterile, non-pyrogenic, lyophilized formulation of dantrolene sodium for injection. Revontois supplied in 65 mL vials containing 20 mg dantrolene sodium, 3000 mg mannitol, and sufficient sodium hydroxide to yield a pH of approximately 9.5 when reconstituted with 60 ml sterile water for injection USP (without a bacteriostatic agent). Dantrolene sodium is classified as a direct-acting skeletal muscle relaxant. Chemically, dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl] methylene] amino]-2,4- imidazolidinedione sodium salt. The structural formula for the hydrated salt is. The hydrated salt contains approximately 15% water (3.5 moles) and has a molecular weight of 399. The anhydrous salt (dantrolene) has a molecular weight of 336.</Description>
</NDC>
<NDC>
<NDCCode>13310-119-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (13310-119-05)</PackageDescription>
<NDC11Code>13310-0119-05</NDC11Code>
<ProductNDC>13310-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colcrys</ProprietaryName>
<NonProprietaryName>Colchicine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022352</ApplicationNumber>
<LabelerName>AR Scientific Inc.</LabelerName>
<SubstanceName>COLCHICINE</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Interactions [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>COLCRYS (colchicine, USP) tablets are an alkaloid indicated for: 1 Prophylaxis and Treatment of Gout Flares in adults (1.1)., 2 Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).</IndicationAndUsage>
<Description>Colchicine is an alkaloid chemically described as (S)N- (5,6,7,9-tetrahydro- 1,2,3, 10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine occurs as a pale yellow powder that is soluble in water. COLCRYS® (colchicine, USP) tablets are supplied for oral administration as purple, film-coated, capsule-shaped tablets (0.1575" × 0.3030"), debossed with 'AR 374' on one side and scored on the other, containing 0.6 mg of the active ingredient colchicine USP. Inactive ingredients: carnauba wax, FD&C blue #2, FD&C red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>16714-399-01</NDCCode>
<PackageDescription>50 TABLET, FILM COATED in 1 BOTTLE (16714-399-01) </PackageDescription>
<NDC11Code>16714-0399-01</NDC11Code>
<ProductNDC>16714-399</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefprozil</ProprietaryName>
<NonProprietaryName>Cefprozil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065340</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>CEFPROZIL</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-05-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefprozil and other antibacterial drugs, cefprozil should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefprozil tablets are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below:UPPER RESPIRATORY TRACT Pharyngitis/tonsillitis caused by Streptococcus pyogenes. NOTE: The usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever, is penicillin given by the intramuscular route. Cefprozil is generally effective in the eradication of Streptococcus pyogenes from the nasopharynx; however, substantial data establishing the efficacy of cefprozil in the subsequent prevention of rheumatic fever are not available at present. Otitis Media caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). (See CLINICAL STUDIES.) NOTE: In the treatment of otitis media due to β-lactamase producing organisms, cefprozil had bacteriologic eradication rates somewhat lower than those observed with a product containing a specific β-lactamase inhibitor. In considering the use of cefprozil, lower overall eradication rates should be balanced against the susceptibility patterns of the common microbes in a given geographic area and the increased potential for toxicity with products containing β-lactamase inhibitors. Acute Sinusitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). LOWER RESPIRATORY TRACT Acute Bacterial Exacerbation of Chronic Bronchitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including β-lactamase-producing strains), and Moraxella (Branhamella) catarrhalis (including β-lactamase-producing strains). SKIN AND SKIN STRUCTURE Uncomplicated Skin and Skin-Structure Infections caused by Staphylococcus aureus (including penicillinase-producing strains) and Streptococcus pyogenes. Abscesses usually require surgical drainage.</IndicationAndUsage>
<Description>Cefprozil is a semi-synthetic broad-spectrum cephalosporin antibiotic.Cefprozil is a cis and trans isomeric mixture (≥90% cis). The chemical name for the monohydrate is (6R,7R)-7-[(R)-2-Amino-2-(p-hydroxyphenyl) acetamido]-8-oxo-3-propenyl-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid monohydrate, and the structural formula is. Cefprozil USP is a white to yellowish powder with a molecular formula for the monohydrate of C18H19N3O5SH2O and a molecular weight of 407.45. Cefprozil tablets USP are intended for oral administration.Cefprozil tablets USP contain cefprozil USP equivalent to 250 mg or 500 mg of anhydrous cefprozil. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, magnesium stearate, hypromellose, polyethylene glycol, polysorbate 80, and titanium dioxide. The 250 mg tablets also contain FD&C Yellow #6 aluminum lake. The tablets are imprinted with edible ink containing shellac glaze, black iron oxide, propylene glycol and ammonium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>16729-549-10</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (16729-549-10) </PackageDescription>
<NDC11Code>16729-0549-10</NDC11Code>
<ProductNDC>16729-549</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate</ProprietaryName>
<NonProprietaryName>Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20200901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209069</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>2; .5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and naloxone sublingual tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and naloxone sublingual tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and Naloxone Sublingual Tablets, USP are uncoated white to off-white, round biconvex tablets, debossed with an alpha-numeric imprint identifying the product and strength on one side, and plain on the other. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). They are intended for sublingual administration and are available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains citric acid anhydrous, crospovidone, lactose monohydrate, magnesium stearate, mannitol, corn syrup solids, modified food starch, natural lemon flavor, pregelatinized starch (maize), povidone, sodium citrate dihydrate, and sucralose. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4HCl2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>16729-550-10</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (16729-550-10) </PackageDescription>
<NDC11Code>16729-0550-10</NDC11Code>
<ProductNDC>16729-550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate</ProprietaryName>
<NonProprietaryName>Buprenorphine Hydrochloride And Naloxone Hydrochloride Dihydrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20200901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209069</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2023-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and naloxone sublingual tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and naloxone sublingual tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and Naloxone Sublingual Tablets, USP are uncoated white to off-white, round biconvex tablets, debossed with an alpha-numeric imprint identifying the product and strength on one side, and plain on the other. They contain buprenorphine HCl, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). They are intended for sublingual administration and are available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains citric acid anhydrous, crospovidone, lactose monohydrate, magnesium stearate, mannitol, corn syrup solids, modified food starch, natural lemon flavor, pregelatinized starch (maize), povidone, sodium citrate dihydrate, and sucralose. Chemically, buprenorphine HCl is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy- 6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure. Buprenorphine HCl has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure. Naloxone hydrochloride dihydrate has the molecular formula C19H21NO4HCl2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>31722-479-30</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (31722-479-30) / 1 FILM, SOLUBLE in 1 POUCH (31722-479-31) </PackageDescription>
<NDC11Code>31722-0479-30</NDC11Code>
<ProductNDC>31722-479</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine And Naloxone</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>FILM, SOLUBLE</DosageFormName>
<RouteName>BUCCAL; SUBLINGUAL</RouteName>
<StartMarketingDate>20260501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219850</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2; .5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium, citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>31722-480-30</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (31722-480-30) / 1 FILM, SOLUBLE in 1 POUCH (31722-480-31) </PackageDescription>
<NDC11Code>31722-0480-30</NDC11Code>
<ProductNDC>31722-480</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine And Naloxone</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>FILM, SOLUBLE</DosageFormName>
<RouteName>BUCCAL; SUBLINGUAL</RouteName>
<StartMarketingDate>20260501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219850</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4; 1</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium, citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>31722-481-30</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (31722-481-30) / 1 FILM, SOLUBLE in 1 POUCH (31722-481-31) </PackageDescription>
<NDC11Code>31722-0481-30</NDC11Code>
<ProductNDC>31722-481</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine And Naloxone</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>FILM, SOLUBLE</DosageFormName>
<RouteName>BUCCAL; SUBLINGUAL</RouteName>
<StartMarketingDate>20260501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219850</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium, citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
</NDCList>