RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>85766-191-33</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BLISTER PACK (85766-191-33) </PackageDescription>
    <NDC11Code>85766-0191-33</NDC11Code>
    <ProductNDC>85766-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090836</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria.  To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD &amp; C Blue No. 1, D &amp; C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD &amp; C Red No. 40; 333 mg and 750 mg Capsules contains FD &amp; C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>43744-191-33</NDCCode>
    <PackageDescription>75 g in 1 DRUM (43744-191-33)</PackageDescription>
    <NDC11Code>43744-0191-33</NDC11Code>
    <ProductNDC>43744-191</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Cidofovir Dihydrate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20110901</StartMarketingDate>
    <EndMarketingDate>20130624</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>CBSCHEM LIMITED</LabelerName>
    <SubstanceName>CIDOFOVIR</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>55505-191-33</NDCCode>
    <PackageDescription>125 mL in 1 BOTTLE (55505-191-33) </PackageDescription>
    <NDC11Code>55505-0191-33</NDC11Code>
    <ProductNDC>55505-191</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nizoral</ProprietaryName>
    <NonProprietaryName>Ketoconazole</NonProprietaryName>
    <DosageFormName>SHAMPOO</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190107</StartMarketingDate>
    <EndMarketingDate>20210801</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020310</ApplicationNumber>
    <LabelerName>Kramer Laboratories</LabelerName>
    <SubstanceName>KETOCONAZOLE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2021-08-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20190107</StartMarketingDatePackage>
    <EndMarketingDatePackage>20210801</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>85766-191-14</NDCCode>
    <PackageDescription>14 CAPSULE in 1 BOTTLE, PLASTIC (85766-191-14) </PackageDescription>
    <NDC11Code>85766-0191-14</NDC11Code>
    <ProductNDC>85766-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090836</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260321</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria.  To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD &amp; C Blue No. 1, D &amp; C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD &amp; C Red No. 40; 333 mg and 750 mg Capsules contains FD &amp; C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-191-20</NDCCode>
    <PackageDescription>20 CAPSULE in 1 BOTTLE, PLASTIC (85766-191-20) </PackageDescription>
    <NDC11Code>85766-0191-20</NDC11Code>
    <ProductNDC>85766-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090836</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210408</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria.  To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD &amp; C Blue No. 1, D &amp; C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD &amp; C Red No. 40; 333 mg and 750 mg Capsules contains FD &amp; C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-191-21</NDCCode>
    <PackageDescription>21 CAPSULE in 1 BOTTLE, PLASTIC (85766-191-21) </PackageDescription>
    <NDC11Code>85766-0191-21</NDC11Code>
    <ProductNDC>85766-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090836</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria.  To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD &amp; C Blue No. 1, D &amp; C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD &amp; C Red No. 40; 333 mg and 750 mg Capsules contains FD &amp; C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-191-28</NDCCode>
    <PackageDescription>28 CAPSULE in 1 BOTTLE, PLASTIC (85766-191-28) </PackageDescription>
    <NDC11Code>85766-0191-28</NDC11Code>
    <ProductNDC>85766-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090836</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211122</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria.  To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD &amp; C Blue No. 1, D &amp; C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD &amp; C Red No. 40; 333 mg and 750 mg Capsules contains FD &amp; C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-191-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (85766-191-30) </PackageDescription>
    <NDC11Code>85766-0191-30</NDC11Code>
    <ProductNDC>85766-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090836</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211014</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria.  To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
    <Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD &amp; C Blue No. 1, D &amp; C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD &amp; C Red No. 40; 333 mg and 750 mg Capsules contains FD &amp; C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-103-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-103-30) </PackageDescription>
    <NDC11Code>31722-0103-30</NDC11Code>
    <ProductNDC>31722-103</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:  Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis  Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2)  Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-103-31</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (31722-103-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0103-31</NDC11Code>
    <ProductNDC>31722-103</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:  Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis  Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2)  Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-104-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-104-30) </PackageDescription>
    <NDC11Code>31722-0104-30</NDC11Code>
    <ProductNDC>31722-104</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:  Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis  Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2)  Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-104-31</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (31722-104-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0104-31</NDC11Code>
    <ProductNDC>31722-104</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:  Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis  Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2)  Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-105-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-105-30) </PackageDescription>
    <NDC11Code>31722-0105-30</NDC11Code>
    <ProductNDC>31722-105</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:  Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis  Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2)  Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-105-31</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (31722-105-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0105-31</NDC11Code>
    <ProductNDC>31722-105</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201007</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-10-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:  Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (1.1) Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis  Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (1.2)  Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C22H22F3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>57665-101-41</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (57665-101-41)  / 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>57665-0101-41</NDC11Code>
    <ProductNDC>57665-101</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Abelcet</ProprietaryName>
    <NonProprietaryName>Amphotericin B, Dimyristoylphosphatidylcholine, Dl- And Dimyristoylphosphatidylglycerol, Dl-</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20101018</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050724</ApplicationNumber>
    <LabelerName>Leadiant Biosciences, Inc.</LabelerName>
    <SubstanceName>AMPHOTERICIN B; DIMYRISTOYLPHOSPHATIDYLCHOLINE, DL-; DIMYRISTOYLPHOSPHATIDYLGLYCEROL, DL-</SubstanceName>
    <StrengthNumber>5; 3.4; 1.5</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Lipid-based Polyene Antifungal [EPC], Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101018</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ABELCET ®is indicated for the treatment of invasive fungal infections in patients who are refractory to or intolerant of conventional amphotericin B therapy. This is based on open-label treatment of patients judged by their physicians to be intolerant to or failing conventional amphotericin B therapy (See DESCRIPTION OF CLINICAL STUDIES). DESCRIPTION OF CLINICAL STUDIES. Fungal Infections. Data from 473 patients were pooled from three open-label studies in which ABELCET ®was provided for the treatment of patients with invasive fungal infections who were judged by their physicians to be refractory to or intolerant of conventional amphotericin B, or who had preexisting nephrotoxicity. Results of these studies demonstrated effectiveness of ABELCET ®in the treatment of invasive fungal infections as a second line therapy. Patients were defined by their individual physician as being refractory to or failing conventional amphotericin B therapy based on overall clinical judgement after receiving a minimum total dose of 500 mg of amphotericin B. Nephrotoxicity was defined as a serum creatinine that had increased to &gt;2.5 mg/dL in adults and &gt;1.5 mg/dL in pediatric patients, or a creatinine clearance of &lt;25 mL/min while receiving conventional amphotericin B therapy. Of the 473 patients, four were enrolled more than once; each enrollment contributed separately to the denominator. The median age was 39 years (range of &lt;1 to 93 years); 307 patients were male and 166 female. Patients were Caucasian (381, 81%), African-American (41, 9%), Hispanic (27, 6%), Asian (10, 2%), and various other races (14, 3%). The median baseline neutrophil count was 4,000 PMN/mm3; of these, 101 (21%) had a baseline neutrophil count &lt;500/mm 3. Two-hundred eighty-two patients of the 473 patients were considered evaluable for response to therapy; the other 191 patients were excluded on the basis of unconfirmed diagnosis, confounding factors, concomitant systemic antifungal therapy, or receiving 4 doses or less of ABELCET ®. For evaluable patients, the following fungal infections were treated (n=282): aspergillosis (n=111), candidiasis (n=87), zygomycosis (n=25), cryptococcosis (n=16), and fusariosis (n=11). There were fewer than 10 evaluable patients for each of several other fungal species treated. For each type of fungal infection listed above there were some patients successfully treated. However, in the absence of controlled studies it is unknown how response would have compared to either continuing conventional amphotericin B therapy or the use of alternative antifungal agents. Renal Function:Patients with aspergillosis who initiated treatment with ABELCET ®when serum creatinine was above 2.5 mg/dL experienced a decline in serum creatinine during treatment (Figure 1). Serum creatinine levels were also lower during treatment with ABELCET ®when compared to the serum creatinine levels of patients treated with conventional amphotericin B in a retrospective historical control study. Meaningful statistical testing of the differences between these two groups is precluded since these data were obtained from two separate studies. [ ]= Number of patients at each time point. Note: These curves do not represent the clinical course of a given patient, but that of an open-label cohort of patients. [ ]= Number of patients at each time point. Note: These curves do not represent the clinical course of a given patient, but that of an open-label cohort of patients. In a randomized study of ABELCET ®for the treatment of invasive candidiasis in patients with normal baseline renal function, the incidence of nephrotoxicity was significantly less for ABELCET ®at a dose of 5 mg/kg/day than for conventional amphotericin B at a dose of 0.7 mg/kg/day. Despite generally less nephrotoxicity of ABELCET ®observed at a dose of 5 mg/kg/day compared with conventional amphotericin B therapy at a dose range of 0.6-1 mg/kg/day, dose-limiting renal toxicity may still be observed with ABELCET ®. Renal toxicity of doses greater than 5 mg/kg/day of ABELCET ®has not been formally studied.</IndicationAndUsage>
    <Description>ABELCET ®is a sterile, pyrogen-free suspension for intravenous infusion. ABELCET ®consists of amphotericin B complexed with two phospholipids in a 1:1 drug-to-lipid molar ratio. The two phospholipids, l-α-dimyristoylphosphatidylcholine (DMPC) and l-α-dimyristoylphosphatidylglycerol (DMPG), are present in a 7:3 molar ratio. ABELCET ®is yellow and opaque in appearance, with a pH of 5 - 7. NOTE: Liposomal encapsulation or incorporation in a lipid complex can substantially affect a drug’s functional properties relative to those of the unencapsulated or nonlipid-associated drug. In addition, different liposomal or lipid-complexed products with a common active ingredient may vary from one another in the chemical composition and physical form of the lipid component. Such differences may affect functional properties of these drug products. Amphotericin B is a polyene, antifungal antibiotic produced from a strain of Streptomyces nodosus. Amphotericin B is designated chemically as [1R-(1R*, 3S*, 5R*, 6R*, 9R*, 11R*, 15S*, 16R*, 17R*, 18S*, 19E, 21E, 23E, 25E, 27E, 29E, 31E, 33R*, 35S*, 36R*, 37S*)]-33-[(3-Amino-3, 6-dideoxy- β-D-mannopyranosyl) oxy]-1,3,5,6,9,11,17,37-octahydroxy-15,16,18-trimethyl-13-oxo-14,39-dioxabicyclo[33.3.1] nonatriaconta-19, 21, 23, 25, 27, 29, 31-heptaene-36-carboxylic acid. It has a molecular weight of 924.09 and a molecular formula of C 47H 73NO 17. The structural formula is:. ABELCET ®is provided as a sterile, opaque suspension in 20 mL glass, single-use vials. Each 20 mL vial contains 100 mg of amphotericin B in 20 mL of suspension (see DOSAGE AND ADMINISTRATION), and each mL of ABELCET ®contains:. Amphotericin B USP 5.0 mg. l-α-dimyristoylphosphatidylcholine (DMPC) 3.4 mg. l-α-dimyristoylphosphatidylglycerol (DMPG) 1.5 mg. Sodium Chloride USP 9.0 mg. Water for Injection USP, q.s. 1.0 mL. MICROBIOLOGY. Mechanism of Action. The active component of ABELCET ®, amphotericin B, acts by binding to sterols in the cell membrane of susceptible fungi, with a resultant change in the permeability of the membrane. Mammalian cell membranes also contain sterols, and damage to human cells is believed to occur through the same mechanism of action. Activity in vitroand in vivo. ABELCET ®shows in vitro activity against Aspergillussp. (n=3) and Candidasp. (n=10), with MICs generally &lt;1 μg/mL. Depending upon the species and strain of Aspergillusand Candidatested, significant in vitrodifferences in susceptibility to amphotericin B have been reported (MICs ranging from 0.1 to &gt;10 μg/mL). ABELCET ®is active in animal models against Aspergillus fumigatus, Candida albicans, C. guillermondii, C. stellatoideae, and C. tropicalis, Cryptococcussp., Coccidioidomycessp., Histoplasmasp., and Blastomycessp. in which end-points were clearance of microorganisms from target organ(s) and/or prolonged survival of infected animals. Drug Resistance. Fungal species with decreased susceptibility to amphotericin B have been isolated after serial passage in culture media containing the drug, and from some patients receiving prolonged therapy. Although the relevance of drug resistance to clinical outcome has not been established, fungal species which are resistant to amphotericin B may also be resistant to ABELCET ®. Susceptibility Testing. For specific information regarding susceptibility test interpretive criteria, and associated test methods and quality control standards recognized by FDA for this drug, please see: https://www.fda.gov/STIC.</Description>
  </NDC>
  <NDC>
    <NDCCode>72205-191-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (72205-191-25)  / 2 mL in 1 VIAL (72205-191-01) </PackageDescription>
    <NDC11Code>72205-0191-25</NDC11Code>
    <ProductNDC>72205-191</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Chlorpromazine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20260126</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216092</ApplicationNumber>
    <LabelerName>Novadoz Pharmaceuticals LLC</LabelerName>
    <SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of schizophrenia; to control nausea and vomiting; for relief of restlessness and apprehension before surgery; for acute intermittent porphyria; as an adjunct in the treatment of tetanus; to control the manifestations of the manic type of manic-depressive illness; for relief of intractable hiccups; for the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyper excitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance.</IndicationAndUsage>
    <Description>Chlorpromazine Hydrochloride, USP is chemically designated as 2-chloro-10-[3-(dimethylamino) propyl]phenothiazine monohydrochloride and has the following structural formula. C17H19ClN2S  HCl                  MW 355.33 Chlorpromazine Hydrochloride Injection, USP is a sterile, clear, colorless to slight yellow solution intended for deep intramuscular use. Each mL contains chlorpromazine hydrochloride 25 mg, ascorbic acid 2 mg, sodium metabisulfite 1 mg, sodium sulfite 1 mg and sodium chloride 6 mg in Water for Injection. pH is 3.4 to 5.4.</Description>
  </NDC>
  <NDC>
    <NDCCode>72865-150-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (72865-150-30) </PackageDescription>
    <NDC11Code>72865-0150-30</NDC11Code>
    <ProductNDC>72865-150</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:    Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (   1.1)   Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis    Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (   1.2)    Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (   1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C 22H 22F 3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula:. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>72865-150-31</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (72865-150-31)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>72865-0150-31</NDC11Code>
    <ProductNDC>72865-150</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:    Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (   1.1)   Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis    Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (   1.2)    Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (   1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C 22H 22F 3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula:. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>72865-151-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (72865-151-30) </PackageDescription>
    <NDC11Code>72865-0151-30</NDC11Code>
    <ProductNDC>72865-151</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:    Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (   1.1)   Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis    Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (   1.2)    Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (   1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C 22H 22F 3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula:. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>72865-151-31</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (72865-151-31)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>72865-0151-31</NDC11Code>
    <ProductNDC>72865-151</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:    Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (   1.1)   Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis    Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (   1.2)    Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (   1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C 22H 22F 3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula:. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>72865-152-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (72865-152-30) </PackageDescription>
    <NDC11Code>72865-0152-30</NDC11Code>
    <ProductNDC>72865-152</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:    Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (   1.1)   Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis    Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (   1.2)    Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (   1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C 22H 22F 3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula:. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>72865-152-31</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (72865-152-31)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>72865-0152-31</NDC11Code>
    <ProductNDC>72865-152</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cinacalcet</ProprietaryName>
    <NonProprietaryName>Cinacalcet</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209403</ApplicationNumber>
    <LabelerName>XLCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CINACALCET HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>90</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium-sensing Receptor Agonist [EPC], Increased Calcium-sensing Receptor Sensitivity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cinacalcet is a positive modulator of the calcium sensing receptor indicated for:    Secondary Hyperparathyroidism (HPT) in adult patients with chronic kidney disease (CKD) on dialysis. (   1.1)   Limitations of Use: Cinacalcet tablets are not indicated for use in patients with CKD who are not on dialysis    Hypercalcemia in adult patients with Parathyroid Carcinoma (PC). (   1.2)    Severe hypercalcemia in adult patients with primary HPT who are unable to undergo parathyroidectomy. (   1.3).</IndicationAndUsage>
    <Description>Cinacalcet tablets contain the hydrochloride salt of the active ingredient cinacalcet, a positive modulator of the calcium sensing receptor. The empirical formula of cinacalcet is C 22H 22F 3N⋅HCl with a molecular mass of 393.87. It has one chiral center having an R-absolute configuration. The R-enantiomer is the more potent enantiomer and has been shown to be responsible for pharmacodynamic activity. The hydrochloride salt of cinacalcet is a white to off-white powder that is freely soluble in methanol and in ethanol. The hydrochloride salt of cinacalcet is described chemically as (R)-N-(3-(3-(trifluoromethyl) phenyl] propyl]-1-(1-naphthyl) ethylamine hydrochloride and has the following structural formula:. Cinacalcet tablets are formulated as light-green, oval, biconvex, film coated tablets for oral administration in strengths of 30 mg, 60 mg, and 90 mg of cinacalcet as the free base equivalent (33.064 mg, 66.127 mg and 99.191 mg as the hydrochloride salt, respectively). Inactive Ingredients The following are the inactive ingredients in cinacalcet tablets: crospovidone, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc. The coating material contains hypromellose, lactose monohydrate, titanium dioxide, triacetin, FD&amp;C blue #2/indigo carmine AL, iron oxide yellow, polyethylene glycol. The botanical source for pregelatinized starch is corn starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-069-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (85766-069-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0069-01</NDC11Code>
    <ProductNDC>85766-069</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20170630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203702</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for injection, USP and other antibacterial drugs, Ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONScaused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilisor Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIAcaused by Streptococcuspneumoniae,Haemophilus influenzae(including beta-lactamase producing strains) or Moraxella catarrhalis(including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONScaused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,*Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis*or Peptostreptococcusspecies. URINARY TRACT INFECTIONS (complicated and uncomplicated)caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganiior Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal)caused by Neisseria gonorrhoeae,including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASEcaused by Neisseria gonorrhoeae.Ceftriaxone for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatisis one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIAcaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzaeor Klebsiella pneumoniae. BONE AND JOINT INFECTIONScaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniaeor Enterobacterspecies. INTRA-ABDOMINAL INFECTIONScaused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridiumspecies (Note: most strains of Clostridium difficileare resistant) or Peptostreptococcusspecies. MENINGITIScaused by Haemophilus influenzae, Neisseria meningitidisor Streptococcus pneumoniae.Ceftriaxone for injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis*and Escherichia coli.*. * Efficacy for this organism in this organ system was studied in fewer than ten infections..</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.59 and the following structural formula:. Ceftriaxone for injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 1 g of ceftriaxone activity. Ceftriaxone for injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-069-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (85766-069-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0069-10</NDC11Code>
    <ProductNDC>85766-069</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20170630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203702</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251001</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for injection, USP and other antibacterial drugs, Ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONScaused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilisor Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIAcaused by Streptococcuspneumoniae,Haemophilus influenzae(including beta-lactamase producing strains) or Moraxella catarrhalis(including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONScaused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,*Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis*or Peptostreptococcusspecies. URINARY TRACT INFECTIONS (complicated and uncomplicated)caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganiior Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal)caused by Neisseria gonorrhoeae,including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASEcaused by Neisseria gonorrhoeae.Ceftriaxone for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatisis one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIAcaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzaeor Klebsiella pneumoniae. BONE AND JOINT INFECTIONScaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniaeor Enterobacterspecies. INTRA-ABDOMINAL INFECTIONScaused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridiumspecies (Note: most strains of Clostridium difficileare resistant) or Peptostreptococcusspecies. MENINGITIScaused by Haemophilus influenzae, Neisseria meningitidisor Streptococcus pneumoniae.Ceftriaxone for injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis*and Escherichia coli.*. * Efficacy for this organism in this organ system was studied in fewer than ten infections..</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.59 and the following structural formula:. Ceftriaxone for injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 1 g of ceftriaxone activity. Ceftriaxone for injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-128-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (85766-128-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0128-01</NDC11Code>
    <ProductNDC>85766-128</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20170630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203702</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for injection, USP and other antibacterial drugs, Ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONScaused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilisor Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIAcaused by Streptococcuspneumoniae,Haemophilus influenzae(including beta-lactamase producing strains) or Moraxella catarrhalis(including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONScaused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,*Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis*or Peptostreptococcusspecies. URINARY TRACT INFECTIONS (complicated and uncomplicated)caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganiior Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal)caused by Neisseria gonorrhoeae,including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASEcaused by Neisseria gonorrhoeae.Ceftriaxone for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatisis one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIAcaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzaeor Klebsiella pneumoniae. BONE AND JOINT INFECTIONScaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniaeor Enterobacterspecies. INTRA-ABDOMINAL INFECTIONScaused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridiumspecies (Note: most strains of Clostridium difficileare resistant) or Peptostreptococcusspecies. MENINGITIScaused by Haemophilus influenzae, Neisseria meningitidisor Streptococcus pneumoniae.Ceftriaxone for injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis*and Escherichia coli.*. * Efficacy for this organism in this organ system was studied in fewer than ten infections..</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.59 and the following structural formula:. Ceftriaxone for injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 500 mg of ceftriaxone activity. Ceftriaxone for injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-128-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (85766-128-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0128-10</NDC11Code>
    <ProductNDC>85766-128</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20170630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203702</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for injection, USP and other antibacterial drugs, Ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms. LOWER RESPIRATORY TRACT INFECTIONScaused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilisor Serratia marcescens. ACUTE BACTERIAL OTITIS MEDIAcaused by Streptococcuspneumoniae,Haemophilus influenzae(including beta-lactamase producing strains) or Moraxella catarrhalis(including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). SKIN AND SKIN STRUCTURE INFECTIONScaused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,*Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis*or Peptostreptococcusspecies. URINARY TRACT INFECTIONS (complicated and uncomplicated)caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganiior Klebsiella pneumoniae. UNCOMPLICATED GONORRHEA (cervical/urethral and rectal)caused by Neisseria gonorrhoeae,including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. PELVIC INFLAMMATORY DISEASEcaused by Neisseria gonorrhoeae.Ceftriaxone for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatisis one of the suspected pathogens, appropriate antichlamydial coverage should be added. BACTERIAL SEPTICEMIAcaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzaeor Klebsiella pneumoniae. BONE AND JOINT INFECTIONScaused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniaeor Enterobacterspecies. INTRA-ABDOMINAL INFECTIONScaused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridiumspecies (Note: most strains of Clostridium difficileare resistant) or Peptostreptococcusspecies. MENINGITIScaused by Haemophilus influenzae, Neisseria meningitidisor Streptococcus pneumoniae.Ceftriaxone for injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis*and Escherichia coli.*. * Efficacy for this organism in this organ system was studied in fewer than ten infections..</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.59 and the following structural formula:. Ceftriaxone for injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 500 mg of ceftriaxone activity. Ceftriaxone for injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-208-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (85766-208-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0208-01</NDC11Code>
    <ProductNDC>85766-208</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20050509</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065169</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260723</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6 R, 7 R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo- as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-( Z)-( O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, or 1 gram of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-208-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (85766-208-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0208-10</NDC11Code>
    <ProductNDC>85766-208</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20050509</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065169</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260723</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6 R, 7 R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo- as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-( Z)-( O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, or 1 gram of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-209-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (85766-209-01)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0209-01</NDC11Code>
    <ProductNDC>85766-209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20050509</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065169</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260723</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6 R, 7 R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo- as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-( Z)-( O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, or 1 gram of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>85766-209-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (85766-209-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>85766-0209-10</NDC11Code>
    <ProductNDC>85766-209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone Sodium</ProprietaryName>
    <NonProprietaryName>Ceftriaxone Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20050509</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065169</ApplicationNumber>
    <LabelerName>Sportpharm LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260723</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection, USP and other antibacterial drugs, ceftriaxone for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms.</IndicationAndUsage>
    <Description>Ceftriaxone for injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6 R, 7 R)-7-[2-(2-Amino-4-thiazolyl) glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo- as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 7 2-( Z)-( O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C 18H 16N 8Na 2O 7S 33.5H 2O. It has a calculated molecular weight of 661.60 and the following structural formula:. Ceftriaxone sodium is a white to yellowish crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone sodium solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, or 1 gram of ceftriaxone activity. Ceftriaxone sodium contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
</NDCList>