{
"NDC": [
{
"NDCCode": "85766-218-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (85766-218-10) ",
"NDC11Code": "85766-0218-10",
"ProductNDC": "85766-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213794",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide."
},
{
"NDCCode": "85766-218-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (85766-218-01) ",
"NDC11Code": "85766-0218-01",
"ProductNDC": "85766-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213794",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide."
},
{
"NDCCode": "85766-218-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (85766-218-20) ",
"NDC11Code": "85766-0218-20",
"ProductNDC": "85766-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213794",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide."
},
{
"NDCCode": "85766-218-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (85766-218-30) ",
"NDC11Code": "85766-0218-30",
"ProductNDC": "85766-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213794",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide."
},
{
"NDCCode": "85766-218-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (85766-218-60) ",
"NDC11Code": "85766-0218-60",
"ProductNDC": "85766-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213794",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide."
},
{
"NDCCode": "85766-218-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (85766-218-90) ",
"NDC11Code": "85766-0218-90",
"ProductNDC": "85766-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200508",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213794",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250625",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.",
"Description": "Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide."
},
{
"NDCCode": "16729-218-10",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16729-218-10) ",
"NDC11Code": "16729-0218-10",
"ProductNDC": "16729-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel",
"NonProprietaryName": "Clopidogrel",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20131121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202925",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20140128",
"SamplePackage": "N",
"IndicationAndUsage": "Clopidogrel tablets are a P2Y 12 platelet inhibitor indicated for: : 1 Acute coronary syndrome .",
"Description": "Clopidogrel is a thienopyridine class inhibitor of P2Y 12 ADP platelet receptors. Chemically it is methyl (+)-( S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4 H)-acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C 16 H 16ClNO 2SH 2SO 4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate is a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablets USP for oral administration is provided as either pink colored, round, biconvex, film coated tablets debossed with “CI” on one side and plain on other side containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent of 75 mg of clopidogrel base or pink colored, oval, biconvex, beveled edged, film coated tablets debossed with “CL” on one side and plain on other side containing 391.5 mg of clopidogrel bisulfate which is the molar equivalent of 300 mg of clopidogrel base. Each tablet contains colloidal anhydrous silica, hydrogenated castor oil, low substituted hydroxypropyl cellulose, lactose monohydrate and microcrystalline cellulose as inactive ingredients. The pink film coating contains hydroxy propylmethyl cellulose, iron oxide red, lactose monohydrate, titanium dioxide and triacetin."
},
{
"NDCCode": "23155-218-41",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (23155-218-41) > 8 mL in 1 VIAL, GLASS",
"NDC11Code": "23155-0218-41",
"ProductNDC": "23155-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202275",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/8mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC],Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20131115",
"SamplePackage": "N"
},
{
"NDCCode": "31722-218-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (31722-218-10)",
"NDC11Code": "31722-0218-10",
"ProductNDC": "31722-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benztropine Mesylate",
"NonProprietaryName": "Benztropine Mesylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090294",
"LabelerName": "Camber Pharmaceutical, Inc.",
"SubstanceName": "BENZTROPINE MESYLATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).",
"Description": "Benztropine Mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate USP. Each tab let contains the fo llowing inactive ingredients: lactose anhydrous, microcrystalline cellulose, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate."
},
{
"NDCCode": "42669-218-10",
"PackageDescription": "283 g in 1 BOTTLE (42669-218-10) ",
"NDC11Code": "42669-0218-10",
"ProductNDC": "42669-218",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "H-e-b Medicated Corn Starch Foot Powder",
"NonProprietaryName": "Menthol",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180822",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Davion, Inc",
"SubstanceName": "MENTHOL",
"StrengthNumber": "1",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180822",
"SamplePackage": "N",
"IndicationAndUsage": "Temporary relief of pain and itch associate with: 1 Minor Cuts, 2 Sunburn, 3 Insect Bites, 4 Scrapes, 5 Minor Burns, 6 Minor Skin Irritations."
},
{
"NDCCode": "43744-218-10",
"PackageDescription": "1 g in 1 DRUM (43744-218-10)",
"NDC11Code": "43744-0218-10",
"ProductNDC": "43744-218",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Clorsulon",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130110",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "CLORSULON",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "43744-218-15",
"PackageDescription": "10 g in 1 DRUM (43744-218-15)",
"NDC11Code": "43744-0218-15",
"ProductNDC": "43744-218",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Clorsulon",
"DosageFormName": "POWDER",
"StartMarketingDate": "20130110",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "CLORSULON",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "47682-218-12",
"PackageDescription": "10 PACKET in 1 BOX (47682-218-12) / 1 CLOTH in 1 PACKET (47682-218-99) ",
"NDC11Code": "47682-0218-12",
"ProductNDC": "47682-218",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medi-first Alcohol Wipes",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220103",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Unifirst First Aid Corporation",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/1",
"Status": "Active",
"LastUpdate": "2025-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220103",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 for preparation of the skin prior to injection, 2 first aid to help prevent infection in minor cuts, scrapes and burns."
},
{
"NDCCode": "51991-218-98",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (51991-218-98) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "51991-0218-98",
"ProductNDC": "51991-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxaliplatin",
"NonProprietaryName": "Oxaliplatin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170901",
"EndMarketingDate": "20201031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204616",
"LabelerName": "Breckenridge Pharmaceutical, Inc.",
"SubstanceName": "OXALIPLATIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Platinum-based Drug [EPC],Platinum-containing Compounds [EXT]",
"Status": "Deprecated",
"LastUpdate": "2020-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170901",
"EndMarketingDatePackage": "20201031",
"SamplePackage": "N"
},
{
"NDCCode": "53746-218-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (53746-218-10) ",
"NDC11Code": "53746-0218-10",
"ProductNDC": "53746-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077880",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2024-04-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121217",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. Metformin hydrochloride Tablets, USP contains 500 mg, 850 mg, or 1,000 mg of metformin HCl, USP. Each tablet contains the inactive ingredients povidone, microcrystalline cellulose, croscarmellose sodium and magnesium stearate. In addition, the coating for the 500 mg, 850 mg, and 1,000 mg tablets contain polyethylene glycol, polyvinyl alcohol, titanium dioxide, talc, gum acacia, maltodextrin, propylene glycol and natural flavors."
},
{
"NDCCode": "54575-218-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-218-10)",
"NDC11Code": "54575-0218-10",
"ProductNDC": "54575-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rhodotorula Mucilaginosa",
"NonProprietaryName": "Rhodotorula Mucilaginosa",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "RHODOTORULA MUCILAGINOSA",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "55312-218-10",
"PackageDescription": "1 BOTTLE in 1 BOX (55312-218-10) > 100 TABLET in 1 BOTTLE",
"NDC11Code": "55312-0218-10",
"ProductNDC": "55312-218",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079174",
"LabelerName": "Western Family Foods, Inc.",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:Headachemuscular achesminor pain of arthritistoothachebackachethe common coldmenstrual crampstemporarily reduces fever."
},
{
"NDCCode": "57687-218-10",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (57687-218-10) > 10 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "57687-0218-10",
"ProductNDC": "57687-218",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bach Original Flower Remedies Larch",
"NonProprietaryName": "Larix Decidua Flowering Top",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20220920",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Nelson Bach USA Limited",
"SubstanceName": "LARIX DECIDUA FLOWERING TOP",
"StrengthNumber": "5",
"StrengthUnit": "[hp_X]/.095mL",
"Status": "Active",
"LastUpdate": "2022-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220920",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of naturally occuring simple nervous tension."
},
{
"NDCCode": "58411-218-30",
"PackageDescription": "1 TRAY in 1 CARTON (58411-218-30) > 10 g in 1 TRAY",
"NDC11Code": "58411-0218-30",
"ProductNDC": "58411-218",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido Sheer And Perfect Compact (refill)",
"ProprietaryNameSuffix": "O20",
"NonProprietaryName": "Octinoxate, Octocrylene, And Titanium Dioxide",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140901",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "OCTINOXATE; OCTOCRYLENE; TITANIUM DIOXIDE",
"StrengthNumber": "290; 200; 620",
"StrengthUnit": "mg/10g; mg/10g; mg/10g",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20140901",
"SamplePackage": "N"
},
{
"NDCCode": "61748-218-10",
"PackageDescription": "1 CAN in 1 CARTON (61748-218-10) > 100 g in 1 CAN",
"NDC11Code": "61748-0218-10",
"ProductNDC": "61748-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207094",
"LabelerName": "Versapharm Incorporated",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": ".147",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20170501",
"SamplePackage": "N"
},
{
"NDCCode": "61919-218-10",
"PackageDescription": "10 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (61919-218-10)",
"NDC11Code": "61919-0218-10",
"ProductNDC": "61919-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078050",
"LabelerName": "DIRECT RX",
"SubstanceName": "ONDANSETRON",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prevention of nausea and vomiting associated with highly emetogenic cancer chemotherapy, including cisplatin ≥ 50 mg/m 2. Prevention of nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy. Prevention of nausea and vomiting associated with radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Prevention of postoperative nausea and/or vomiting. As with other antiemetics, routine prophylaxis is not recommended for patients in whom there is little expectation that nausea and/or vomiting will occur postoperatively. In patients where nausea and/or vomiting must be avoided postoperatively, ondansetron hydrochloride tablets, ondansetron orally disintegrating tablets, and ondansetron hydrochloride oral solution are recommended even where the incidence of postoperative nausea and/or vomiting is low. Close.",
"Description": "The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron, and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1 H-imidazol- 1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula. The molecular formula is C18H19N3O representing a molecular weight of 293.4. USP disintegration test pending. Each ondansetron orally disintegrating tablet, USP intended for oral administration contains 4 mg or 8 mg of ondansetron base. In addition, each ondansetron orally disintegrating tablet, USP contains the following inactive ingredients: aspartame, calcium stearate, colloidal silicon dioxide, mannitol, microcrystalline cellulose, polacrilin potassium, sodium starch glycolate, strawberry flavor and talc. Ondansetron orally disintegrating tablets, USP are a orally administered formulation of ondansetron which rapidly disintegrates on the tongue and does not require water to aid dissolution or swallowing."
},
{
"NDCCode": "64950-218-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (64950-218-10) ",
"NDC11Code": "64950-0218-10",
"ProductNDC": "64950-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flurbiprofen",
"NonProprietaryName": "Flurbiprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074431",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "FLURBIPROFEN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241101",
"SamplePackage": "N",
"IndicationAndUsage": "Flurbiprofen tablets are indicated: 1 For relief of the signs and symptoms of rheumatoid arthritis., 2 For relief of the signs and symptoms of osteoarthritis.",
"Description": "Flurbiprofen Tablets, USP are a member of the phenylalkanoic acid derivative group of nonsteroidal anti-inflammatory drug. Flurbiprofen Tablets, USP are round, blue, film-coated debossed \"NH\" – \"100\" tablets for oral administration. Flurbiprofen, USP is a racemic mixture of (+)S- and (-)R- enantiomers. Flurbiprofen, USP is a white or slightly yellow crystalline powder. It is slightly soluble in water at pH 7.0 and readily soluble in most polar solvents. The chemical name is [1,1'-biphenyl]-4-acetic acid, 2-fluoro-α-methyl-, (±)-. It has the following structural formula. Each tablet, for oral administration, contains 100 mg flurbiprofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and FD&C Blue #1 aluminum lake."
},
{
"NDCCode": "65162-218-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (65162-218-10) ",
"NDC11Code": "65162-0218-10",
"ProductNDC": "65162-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121217",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077880",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20121217",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. Metformin hydrochloride Tablets, USP contains 500 mg, 850 mg, or 1,000 mg of metformin HCl, USP. Each tablet contains the inactive ingredients povidone, microcrystalline cellulose, croscarmellose sodium and magnesium stearate. In addition, the coating for the 500 mg, 850 mg, and 1,000 mg tablets contain polyethylene glycol, polyvinyl alcohol, titanium dioxide, talc, gum acacia, maltodextrin, propylene glycol and natural flavors."
},
{
"NDCCode": "66794-218-41",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (66794-218-41) > 20 mL in 1 VIAL, SINGLE-USE (66794-218-02) ",
"NDC11Code": "66794-0218-41",
"ProductNDC": "66794-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Piperacillin And Tazobactam",
"NonProprietaryName": "Piperacillin And Tazobactam",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212287",
"LabelerName": "Piramal Critical Care Inc",
"SubstanceName": "PIPERACILLIN SODIUM; TAZOBACTAM SODIUM",
"StrengthNumber": "4; .5",
"StrengthUnit": "g/20mL; g/20mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200316",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Intra-abdominal Infections Piperacillin and Tazobactam for Injection is indicated in adults and pediatric patients (2 months of age and older) for the treatment of appendicitis (complicated by rupture or abscess) and peritonitis caused by beta-lactamase producing isolates of Escherichia coli or the following members of the Bacteroides fragilis group: B. fragilis, B. ovatus, B. thetaiotaomicron, or B. vulgatus. 1.2 Nosocomial Pneumonia Piperacillin and Tazobactam for Injection is indicated in adults and pediatric patients (2 months of age and older) for the treatment of nosocomial pneumonia (moderate to severe) caused by beta-lactamase producing isolates of Staphylococcus aureus and by piperacillin/tazobactam-susceptible Acinetobacter baumannii, Haemophilus influenzae, Klebsiella pneumoniae, and Pseudomonas aeruginosa ( Nosocomial pneumonia caused by P. aeruginosa should be treated in combination with an aminoglycoside) [see Dosage and Administration ( 2)]. 1.3 Skin and Skin Structure Infections Piperacillin and Tazobactam for Injection is indicated in adults for the treatment of uncomplicated and complicated skin and skin structure infections, including cellulitis, cutaneous abscesses and ischemic/diabetic foot infections caused by beta-lactamase producing isolates of Staphylococcus aureus. 1.4 Female Pelvic Infections Piperacillin and Tazobactam for Injection is indicated in adults for the treatment of postpartum endometritis or pelvic inflammatory disease caused by beta-lactamase producing isolates of Escherichia coli. 1.5 Community-acquired Pneumonia Piperacillin and Tazobactam for Injection is indicated in adults for the treatment of community-acquired pneumonia (moderate severity only) caused by beta-lactamase producing isolates of Haemophilus influenzae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Piperacillin and Tazobactam for Injection and other antibacterial drugs, Piperacillin and Tazobactam for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine- carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2- carboxylate. The chemical formula is C 23H 26N 5NaO 7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1- azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10H 11N 4NaO 5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP, is a white to off-white sterile, powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. Each piperacillin and tazobactam for injection, USP 2.25 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 gram of tazobactam. Each piperacillin and tazobactam for injection, USP 3.375 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 gram of tazobactam. Each piperacillin and tazobactam for injection, USP 4.5 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 gram of tazobactam. Piperacillin and tazobactam for injection, USP is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product."
},
{
"NDCCode": "67457-218-10",
"PackageDescription": "1 VIAL in 1 CARTON (67457-218-10) > 10 mL in 1 VIAL",
"NDC11Code": "67457-0218-10",
"ProductNDC": "67457-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duraclon",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "19970126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020615",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2021-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970126",
"SamplePackage": "N",
"IndicationAndUsage": "Duraclon is indicated in combination with opiates for the treatment of severe pain in cancer patients that is not adequately relieved by opioid analgesics alone. Epidural clonidine is more likely to be effective in patients with neuropathic pain than somatic or visceral pain (see Clinical Trials). The safety of this drug product has only been established in a highly selected group of cancer patients, and only after an adequate trial of opioid analgesia. Other use is of unproven safety and is not recommended. In a rare patient, the potential benefits may outweigh the known risks (see WARNINGS).",
"Description": "Duraclon (clonidine hydrochloride injection, USP) is a centrally-acting analgesic solution for use in continuous epidural infusion devices. Clonidine Hydrochloride, USP, is an imidazoline derivative and exists as a mesomeric compound. The chemical names are Benzenamine,2,6-dichloro-N-2-imidazolidinylidene-,monohydrochloride and 2-[(2,6-dichlorophenyl)imino]imidazolidine monohydrochloride. The following is the structural formula. Duraclon (clonidine hydrochloride injection, USP) is supplied as a clear, colorless, preservative-free, pyrogen-free, aqueous sterile solution (pH 5 to 7) in single-dose, 10 mL vials. Each mL of the 100 mcg/mL (0.1 mg/mL) concentration contains 100 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride, USP in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 1 mg (1000 mcg) of clonidine hydrochloride."
},
{
"NDCCode": "67777-218-01",
"PackageDescription": "1000 BOX in 1 CASE (67777-218-01) / 10 PACKET in 1 BOX (67777-218-02) / .9 g in 1 PACKET",
"NDC11Code": "67777-0218-01",
"ProductNDC": "67777-218",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neomycin",
"NonProprietaryName": "Neomycin Ointment",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240130",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M004",
"LabelerName": "Dynarex Corporation",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2024-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240130",
"SamplePackage": "N",
"IndicationAndUsage": "First aid to help prevent infection in minor cuts, scrapes, and burns."
},
{
"NDCCode": "67877-218-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (67877-218-10) ",
"NDC11Code": "67877-0218-10",
"ProductNDC": "67877-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091184",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "850",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110131",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. Metformin hydrochloride extended-release tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets and metformin hydrochloride extended-release tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets USP contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride USP. Each tablet contains the inactive ingredients corn starch, povidone and magnesium stearate. In addition, the coating for each tablet contains hypromellose, talc, titanium dioxide, polyethylene glycol, and propylene glycol. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride as the active ingredient. Metformin hydrochloride extended-release tablets USP, 500 mg and 750 mg contain the inactive ingredients sodium carboxymethyl cellulose, hypromellose, microcrystalline cellulose, magnesium stearate and copovidone. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "67877-218-38",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (67877-218-38) / 10 TABLET, FILM COATED in 1 BLISTER PACK (67877-218-33) ",
"NDC11Code": "67877-0218-38",
"ProductNDC": "67877-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091184",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "850",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110131",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. Metformin hydrochloride extended-release tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets and metformin hydrochloride extended-release tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets USP contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride USP. Each tablet contains the inactive ingredients corn starch, povidone and magnesium stearate. In addition, the coating for each tablet contains hypromellose, talc, titanium dioxide, polyethylene glycol, and propylene glycol. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride as the active ingredient. Metformin hydrochloride extended-release tablets USP, 500 mg and 750 mg contain the inactive ingredients sodium carboxymethyl cellulose, hypromellose, microcrystalline cellulose, magnesium stearate and copovidone. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68382-218-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (68382-218-10) ",
"NDC11Code": "68382-0218-10",
"ProductNDC": "68382-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atomoxetine",
"NonProprietaryName": "Atomoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079017",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATOMOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Reuptake Inhibitor [EPC], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170612",
"SamplePackage": "N",
"IndicationAndUsage": "Atomoxetine is a selective norepinephrine reuptake inhibitor indicated for the treatment of Attention-Deficit/Hyperactivity Disorder (ADHD). (1.1).",
"Description": "Atomoxetine is a selective norepinephrine reuptake inhibitor. Atomoxetine hydrochloride is the R(-) isomer as determined by x-ray diffraction. The chemical designation is (-)-N-Methyl-3-phenyl-3-(o-tolyloxy)-propylamine hydrochloride. The molecular formula is C17H21NOHCl, which corresponds to a molecular weight of 291.82. The chemical structure is. Atomoxetine hydrochloride is a white to practically white solid, which has a solubility of 27.8 mg/mL in water. Each atomoxetine capsule intended for oral administration contains atomoxetine hydrochloride, USP equivalent to atomoxetine 10 mg or 18 mg or 25 mg or 40 mg or 60 mg or 80 mg or 100 mg. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, gelatin, pregelatinized starch, sodium lauryl sulfate and titanium dioxide. Additionally each 18 mg capsule shell contains: iron oxide yellow, each 25 mg and 40 mg capsule shell contains: FD & C blue # 2, each 60 mg capsule shell contains: FD & C blue # 2 and iron oxide yellow and each 80 mg and 100 mg capsule shell contains: iron oxide red and iron oxide yellow. The capsule is printed with black pharmaceutical ink which contains following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "68382-218-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68382-218-77) / 10 CAPSULE in 1 BLISTER PACK (68382-218-30) ",
"NDC11Code": "68382-0218-77",
"ProductNDC": "68382-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atomoxetine",
"NonProprietaryName": "Atomoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20170612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079017",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "ATOMOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Reuptake Inhibitor [EPC], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170612",
"SamplePackage": "N",
"IndicationAndUsage": "Atomoxetine is a selective norepinephrine reuptake inhibitor indicated for the treatment of Attention-Deficit/Hyperactivity Disorder (ADHD). (1.1).",
"Description": "Atomoxetine is a selective norepinephrine reuptake inhibitor. Atomoxetine hydrochloride is the R(-) isomer as determined by x-ray diffraction. The chemical designation is (-)-N-Methyl-3-phenyl-3-(o-tolyloxy)-propylamine hydrochloride. The molecular formula is C17H21NOHCl, which corresponds to a molecular weight of 291.82. The chemical structure is. Atomoxetine hydrochloride is a white to practically white solid, which has a solubility of 27.8 mg/mL in water. Each atomoxetine capsule intended for oral administration contains atomoxetine hydrochloride, USP equivalent to atomoxetine 10 mg or 18 mg or 25 mg or 40 mg or 60 mg or 80 mg or 100 mg. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, gelatin, pregelatinized starch, sodium lauryl sulfate and titanium dioxide. Additionally each 18 mg capsule shell contains: iron oxide yellow, each 25 mg and 40 mg capsule shell contains: FD & C blue # 2, each 60 mg capsule shell contains: FD & C blue # 2 and iron oxide yellow and each 80 mg and 100 mg capsule shell contains: iron oxide red and iron oxide yellow. The capsule is printed with black pharmaceutical ink which contains following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>85766-218-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (85766-218-10) </PackageDescription>
<NDC11Code>85766-0218-10</NDC11Code>
<ProductNDC>85766-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213794</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>85766-218-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (85766-218-01) </PackageDescription>
<NDC11Code>85766-0218-01</NDC11Code>
<ProductNDC>85766-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213794</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>85766-218-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (85766-218-20) </PackageDescription>
<NDC11Code>85766-0218-20</NDC11Code>
<ProductNDC>85766-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213794</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>85766-218-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (85766-218-30) </PackageDescription>
<NDC11Code>85766-0218-30</NDC11Code>
<ProductNDC>85766-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213794</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>85766-218-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (85766-218-60) </PackageDescription>
<NDC11Code>85766-0218-60</NDC11Code>
<ProductNDC>85766-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213794</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>85766-218-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (85766-218-90) </PackageDescription>
<NDC11Code>85766-0218-90</NDC11Code>
<ProductNDC>85766-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200508</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213794</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ibuprofen tablets and other treatment options before deciding to use ibuprofen. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen tablets are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen tablets are indicated for relief of mild to moderate pain. Ibuprofen tablets are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of ibuprofen tablets in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen tablets USP contain the active ingredient ibuprofen, which is (±) - 2 - ( p -isobutylphenyl) propionic acid. Ibuprofen is a white to off-white, crystalline powder with a melting point of 74 to 77°C and is very soluble in alcohol, in methanol, in acetone and in chloroform, slightly soluble in ethyl acetate, practically insoluble in water. The structural formula is represented below:. Ibuprofen tablets USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol-part. hydrolyzed, povidone, stearic acid, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16729-218-10</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16729-218-10) </PackageDescription>
<NDC11Code>16729-0218-10</NDC11Code>
<ProductNDC>16729-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel</ProprietaryName>
<NonProprietaryName>Clopidogrel</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202925</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C8 Inhibitors [MoA], Decreased Platelet Aggregation [PE], P2Y12 Platelet Inhibitor [EPC], P2Y12 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clopidogrel tablets are a P2Y 12 platelet inhibitor indicated for: : 1 Acute coronary syndrome .</IndicationAndUsage>
<Description>Clopidogrel is a thienopyridine class inhibitor of P2Y 12 ADP platelet receptors. Chemically it is methyl (+)-( S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4 H)-acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C 16 H 16ClNO 2SH 2SO 4 and its molecular weight is 419.9. The structural formula is as follows. Clopidogrel bisulfate is a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablets USP for oral administration is provided as either pink colored, round, biconvex, film coated tablets debossed with “CI” on one side and plain on other side containing 97.875 mg of clopidogrel bisulfate which is the molar equivalent of 75 mg of clopidogrel base or pink colored, oval, biconvex, beveled edged, film coated tablets debossed with “CL” on one side and plain on other side containing 391.5 mg of clopidogrel bisulfate which is the molar equivalent of 300 mg of clopidogrel base. Each tablet contains colloidal anhydrous silica, hydrogenated castor oil, low substituted hydroxypropyl cellulose, lactose monohydrate and microcrystalline cellulose as inactive ingredients. The pink film coating contains hydroxy propylmethyl cellulose, iron oxide red, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>23155-218-41</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (23155-218-41) > 8 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>23155-0218-41</NDC11Code>
<ProductNDC>23155-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202275</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/8mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC],Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>31722-218-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (31722-218-10)</PackageDescription>
<NDC11Code>31722-0218-10</NDC11Code>
<ProductNDC>31722-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benztropine Mesylate</ProprietaryName>
<NonProprietaryName>Benztropine Mesylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090294</ApplicationNumber>
<LabelerName>Camber Pharmaceutical, Inc.</LabelerName>
<SubstanceName>BENZTROPINE MESYLATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Antihistamine [EPC],Cholinergic Antagonists [MoA],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For use as an adjunct in the therapy of all forms of parkinsonism. Useful also in the control of extrapyramidal disorders (except tardive dyskinesia – see PRECAUTIONS) due to neuroleptic drugs (e.g., phenothiazines).</IndicationAndUsage>
<Description>Benztropine Mesylate is a synthetic compound containing structural features found in atropine and diphenhydramine. It is a crystalline white powder, very soluble in water, designated as 3α-(Diphenylmethoxy)-1αH, 5αH-tropane methanesulfonate, with the following structural formula. Each tablet, for oral administration, contains 0.5 mg, 1 mg or 2 mg of benztropine mesylate USP. Each tab let contains the fo llowing inactive ingredients: lactose anhydrous, microcrystalline cellulose, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>42669-218-10</NDCCode>
<PackageDescription>283 g in 1 BOTTLE (42669-218-10) </PackageDescription>
<NDC11Code>42669-0218-10</NDC11Code>
<ProductNDC>42669-218</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>H-e-b Medicated Corn Starch Foot Powder</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180822</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Davion, Inc</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporary relief of pain and itch associate with: 1 Minor Cuts, 2 Sunburn, 3 Insect Bites, 4 Scrapes, 5 Minor Burns, 6 Minor Skin Irritations.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43744-218-10</NDCCode>
<PackageDescription>1 g in 1 DRUM (43744-218-10)</PackageDescription>
<NDC11Code>43744-0218-10</NDC11Code>
<ProductNDC>43744-218</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Clorsulon</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130110</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>CLORSULON</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-218-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-218-15)</PackageDescription>
<NDC11Code>43744-0218-15</NDC11Code>
<ProductNDC>43744-218</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Clorsulon</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20130110</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>CLORSULON</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>47682-218-12</NDCCode>
<PackageDescription>10 PACKET in 1 BOX (47682-218-12) / 1 CLOTH in 1 PACKET (47682-218-99) </PackageDescription>
<NDC11Code>47682-0218-12</NDC11Code>
<ProductNDC>47682-218</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medi-first Alcohol Wipes</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220103</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Unifirst First Aid Corporation</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 for preparation of the skin prior to injection, 2 first aid to help prevent infection in minor cuts, scrapes and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51991-218-98</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (51991-218-98) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>51991-0218-98</NDC11Code>
<ProductNDC>51991-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxaliplatin</ProprietaryName>
<NonProprietaryName>Oxaliplatin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170901</StartMarketingDate>
<EndMarketingDate>20201031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204616</ApplicationNumber>
<LabelerName>Breckenridge Pharmaceutical, Inc.</LabelerName>
<SubstanceName>OXALIPLATIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC],Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170901</StartMarketingDatePackage>
<EndMarketingDatePackage>20201031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53746-218-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (53746-218-10) </PackageDescription>
<NDC11Code>53746-0218-10</NDC11Code>
<ProductNDC>53746-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077880</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. Metformin hydrochloride Tablets, USP contains 500 mg, 850 mg, or 1,000 mg of metformin HCl, USP. Each tablet contains the inactive ingredients povidone, microcrystalline cellulose, croscarmellose sodium and magnesium stearate. In addition, the coating for the 500 mg, 850 mg, and 1,000 mg tablets contain polyethylene glycol, polyvinyl alcohol, titanium dioxide, talc, gum acacia, maltodextrin, propylene glycol and natural flavors.</Description>
</NDC>
<NDC>
<NDCCode>54575-218-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-218-10)</PackageDescription>
<NDC11Code>54575-0218-10</NDC11Code>
<ProductNDC>54575-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rhodotorula Mucilaginosa</ProprietaryName>
<NonProprietaryName>Rhodotorula Mucilaginosa</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>RHODOTORULA MUCILAGINOSA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>55312-218-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (55312-218-10) > 100 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>55312-0218-10</NDC11Code>
<ProductNDC>55312-218</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079174</ApplicationNumber>
<LabelerName>Western Family Foods, Inc.</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:Headachemuscular achesminor pain of arthritistoothachebackachethe common coldmenstrual crampstemporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>57687-218-10</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (57687-218-10) > 10 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>57687-0218-10</NDC11Code>
<ProductNDC>57687-218</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bach Original Flower Remedies Larch</ProprietaryName>
<NonProprietaryName>Larix Decidua Flowering Top</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220920</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Nelson Bach USA Limited</LabelerName>
<SubstanceName>LARIX DECIDUA FLOWERING TOP</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[hp_X]/.095mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of naturally occuring simple nervous tension.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58411-218-30</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (58411-218-30) > 10 g in 1 TRAY</PackageDescription>
<NDC11Code>58411-0218-30</NDC11Code>
<ProductNDC>58411-218</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido Sheer And Perfect Compact (refill)</ProprietaryName>
<ProprietaryNameSuffix>O20</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Octocrylene, And Titanium Dioxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>OCTINOXATE; OCTOCRYLENE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>290; 200; 620</StrengthNumber>
<StrengthUnit>mg/10g; mg/10g; mg/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61748-218-10</NDCCode>
<PackageDescription>1 CAN in 1 CARTON (61748-218-10) > 100 g in 1 CAN</PackageDescription>
<NDC11Code>61748-0218-10</NDC11Code>
<ProductNDC>61748-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207094</ApplicationNumber>
<LabelerName>Versapharm Incorporated</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>.147</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61919-218-10</NDCCode>
<PackageDescription>10 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (61919-218-10)</PackageDescription>
<NDC11Code>61919-0218-10</NDC11Code>
<ProductNDC>61919-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078050</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>ONDANSETRON</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prevention of nausea and vomiting associated with highly emetogenic cancer chemotherapy, including cisplatin ≥ 50 mg/m 2. Prevention of nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy. Prevention of nausea and vomiting associated with radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Prevention of postoperative nausea and/or vomiting. As with other antiemetics, routine prophylaxis is not recommended for patients in whom there is little expectation that nausea and/or vomiting will occur postoperatively. In patients where nausea and/or vomiting must be avoided postoperatively, ondansetron hydrochloride tablets, ondansetron orally disintegrating tablets, and ondansetron hydrochloride oral solution are recommended even where the incidence of postoperative nausea and/or vomiting is low. Close.</IndicationAndUsage>
<Description>The active ingredient in ondansetron orally disintegrating tablets, USP is ondansetron base, the racemic form of ondansetron, and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1 H-imidazol- 1-yl)methyl]-4H-carbazol-4-one. It has the following structural formula. The molecular formula is C18H19N3O representing a molecular weight of 293.4. USP disintegration test pending. Each ondansetron orally disintegrating tablet, USP intended for oral administration contains 4 mg or 8 mg of ondansetron base. In addition, each ondansetron orally disintegrating tablet, USP contains the following inactive ingredients: aspartame, calcium stearate, colloidal silicon dioxide, mannitol, microcrystalline cellulose, polacrilin potassium, sodium starch glycolate, strawberry flavor and talc. Ondansetron orally disintegrating tablets, USP are a orally administered formulation of ondansetron which rapidly disintegrates on the tongue and does not require water to aid dissolution or swallowing.</Description>
</NDC>
<NDC>
<NDCCode>64950-218-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64950-218-10) </PackageDescription>
<NDC11Code>64950-0218-10</NDC11Code>
<ProductNDC>64950-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flurbiprofen</ProprietaryName>
<NonProprietaryName>Flurbiprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074431</ApplicationNumber>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>FLURBIPROFEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Flurbiprofen tablets are indicated: 1 For relief of the signs and symptoms of rheumatoid arthritis., 2 For relief of the signs and symptoms of osteoarthritis.</IndicationAndUsage>
<Description>Flurbiprofen Tablets, USP are a member of the phenylalkanoic acid derivative group of nonsteroidal anti-inflammatory drug. Flurbiprofen Tablets, USP are round, blue, film-coated debossed "NH" – "100" tablets for oral administration. Flurbiprofen, USP is a racemic mixture of (+)S- and (-)R- enantiomers. Flurbiprofen, USP is a white or slightly yellow crystalline powder. It is slightly soluble in water at pH 7.0 and readily soluble in most polar solvents. The chemical name is [1,1'-biphenyl]-4-acetic acid, 2-fluoro-α-methyl-, (±)-. It has the following structural formula. Each tablet, for oral administration, contains 100 mg flurbiprofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and FD&C Blue #1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>65162-218-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (65162-218-10) </PackageDescription>
<NDC11Code>65162-0218-10</NDC11Code>
<ProductNDC>65162-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121217</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077880</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.62. Metformin hydrochloride, USP is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride, USP is 6.68. Metformin hydrochloride Tablets, USP contains 500 mg, 850 mg, or 1,000 mg of metformin HCl, USP. Each tablet contains the inactive ingredients povidone, microcrystalline cellulose, croscarmellose sodium and magnesium stearate. In addition, the coating for the 500 mg, 850 mg, and 1,000 mg tablets contain polyethylene glycol, polyvinyl alcohol, titanium dioxide, talc, gum acacia, maltodextrin, propylene glycol and natural flavors.</Description>
</NDC>
<NDC>
<NDCCode>66794-218-41</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (66794-218-41) > 20 mL in 1 VIAL, SINGLE-USE (66794-218-02) </PackageDescription>
<NDC11Code>66794-0218-41</NDC11Code>
<ProductNDC>66794-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Piperacillin And Tazobactam</ProprietaryName>
<NonProprietaryName>Piperacillin And Tazobactam</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212287</ApplicationNumber>
<LabelerName>Piramal Critical Care Inc</LabelerName>
<SubstanceName>PIPERACILLIN SODIUM; TAZOBACTAM SODIUM</SubstanceName>
<StrengthNumber>4; .5</StrengthNumber>
<StrengthUnit>g/20mL; g/20mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Intra-abdominal Infections Piperacillin and Tazobactam for Injection is indicated in adults and pediatric patients (2 months of age and older) for the treatment of appendicitis (complicated by rupture or abscess) and peritonitis caused by beta-lactamase producing isolates of Escherichia coli or the following members of the Bacteroides fragilis group: B. fragilis, B. ovatus, B. thetaiotaomicron, or B. vulgatus. 1.2 Nosocomial Pneumonia Piperacillin and Tazobactam for Injection is indicated in adults and pediatric patients (2 months of age and older) for the treatment of nosocomial pneumonia (moderate to severe) caused by beta-lactamase producing isolates of Staphylococcus aureus and by piperacillin/tazobactam-susceptible Acinetobacter baumannii, Haemophilus influenzae, Klebsiella pneumoniae, and Pseudomonas aeruginosa ( Nosocomial pneumonia caused by P. aeruginosa should be treated in combination with an aminoglycoside) [see Dosage and Administration ( 2)]. 1.3 Skin and Skin Structure Infections Piperacillin and Tazobactam for Injection is indicated in adults for the treatment of uncomplicated and complicated skin and skin structure infections, including cellulitis, cutaneous abscesses and ischemic/diabetic foot infections caused by beta-lactamase producing isolates of Staphylococcus aureus. 1.4 Female Pelvic Infections Piperacillin and Tazobactam for Injection is indicated in adults for the treatment of postpartum endometritis or pelvic inflammatory disease caused by beta-lactamase producing isolates of Escherichia coli. 1.5 Community-acquired Pneumonia Piperacillin and Tazobactam for Injection is indicated in adults for the treatment of community-acquired pneumonia (moderate severity only) caused by beta-lactamase producing isolates of Haemophilus influenzae. 1.6 Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Piperacillin and Tazobactam for Injection and other antibacterial drugs, Piperacillin and Tazobactam for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Piperacillin and tazobactam for injection, USP is an injectable antibacterial combination product consisting of the semisynthetic antibacterial piperacillin sodium and the beta-lactamase inhibitor tazobactam sodium for intravenous administration. Piperacillin sodium is derived from D(-)-α-aminobenzyl-penicillin. The chemical name of piperacillin sodium is sodium (2S,5R,6R)-6-[(R)-2-(4-ethyl-2,3-dioxo-1-piperazine- carboxamido)-2-phenylacetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2- carboxylate. The chemical formula is C 23H 26N 5NaO 7S and the molecular weight is 539.5. The chemical structure of piperacillin sodium is:. Tazobactam sodium, a derivative of the penicillin nucleus, is a penicillanic acid sulfone. Its chemical name is sodium (2S,3S,5R)-3-methyl-7-oxo-3-(1H-1,2,3-triazol-1-ylmethyl)-4-thia-1- azabicyclo[3.2.0]heptane-2-carboxylate-4,4-dioxide. The chemical formula is C 10H 11N 4NaO 5S and the molecular weight is 322.3. The chemical structure of tazobactam sodium is:. Piperacillin and tazobactam for injection, USP, is a white to off-white sterile, powder consisting of piperacillin and tazobactam as their sodium salts packaged in glass vials. Each piperacillin and tazobactam for injection, USP 2.25 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 2 grams of piperacillin and tazobactam sodium equivalent to 0.25 gram of tazobactam. Each piperacillin and tazobactam for injection, USP 3.375 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 3 grams of piperacillin and tazobactam sodium equivalent to 0.375 gram of tazobactam. Each piperacillin and tazobactam for injection, USP 4.5 gram single-dose vial contains an amount of drug sufficient for withdrawal of piperacillin sodium equivalent to 4 grams of piperacillin and tazobactam sodium equivalent to 0.5 gram of tazobactam. Piperacillin and tazobactam for injection, USP is a monosodium salt of piperacillin and a monosodium salt of tazobactam containing a total of 2.35 mEq (54 mg) of sodium (Na+) per gram of piperacillin in the combination product.</Description>
</NDC>
<NDC>
<NDCCode>67457-218-10</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (67457-218-10) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>67457-0218-10</NDC11Code>
<ProductNDC>67457-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duraclon</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>19970126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020615</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duraclon is indicated in combination with opiates for the treatment of severe pain in cancer patients that is not adequately relieved by opioid analgesics alone. Epidural clonidine is more likely to be effective in patients with neuropathic pain than somatic or visceral pain (see Clinical Trials). The safety of this drug product has only been established in a highly selected group of cancer patients, and only after an adequate trial of opioid analgesia. Other use is of unproven safety and is not recommended. In a rare patient, the potential benefits may outweigh the known risks (see WARNINGS).</IndicationAndUsage>
<Description>Duraclon (clonidine hydrochloride injection, USP) is a centrally-acting analgesic solution for use in continuous epidural infusion devices. Clonidine Hydrochloride, USP, is an imidazoline derivative and exists as a mesomeric compound. The chemical names are Benzenamine,2,6-dichloro-N-2-imidazolidinylidene-,monohydrochloride and 2-[(2,6-dichlorophenyl)imino]imidazolidine monohydrochloride. The following is the structural formula. Duraclon (clonidine hydrochloride injection, USP) is supplied as a clear, colorless, preservative-free, pyrogen-free, aqueous sterile solution (pH 5 to 7) in single-dose, 10 mL vials. Each mL of the 100 mcg/mL (0.1 mg/mL) concentration contains 100 mcg of Clonidine Hydrochloride, USP and 9 mg Sodium Chloride, USP in Water for Injection, USP. Hydrochloric Acid and/or Sodium Hydroxide may have been added for pH adjustment. Each 10 mL vial contains 1 mg (1000 mcg) of clonidine hydrochloride.</Description>
</NDC>
<NDC>
<NDCCode>67777-218-01</NDCCode>
<PackageDescription>1000 BOX in 1 CASE (67777-218-01) / 10 PACKET in 1 BOX (67777-218-02) / .9 g in 1 PACKET</PackageDescription>
<NDC11Code>67777-0218-01</NDC11Code>
<ProductNDC>67777-218</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neomycin</ProprietaryName>
<NonProprietaryName>Neomycin Ointment</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240130</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M004</ApplicationNumber>
<LabelerName>Dynarex Corporation</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid to help prevent infection in minor cuts, scrapes, and burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67877-218-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (67877-218-10) </PackageDescription>
<NDC11Code>67877-0218-10</NDC11Code>
<ProductNDC>67877-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091184</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. Metformin hydrochloride extended-release tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets and metformin hydrochloride extended-release tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets USP contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride USP. Each tablet contains the inactive ingredients corn starch, povidone and magnesium stearate. In addition, the coating for each tablet contains hypromellose, talc, titanium dioxide, polyethylene glycol, and propylene glycol. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride as the active ingredient. Metformin hydrochloride extended-release tablets USP, 500 mg and 750 mg contain the inactive ingredients sodium carboxymethyl cellulose, hypromellose, microcrystalline cellulose, magnesium stearate and copovidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>67877-218-38</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (67877-218-38) / 10 TABLET, FILM COATED in 1 BLISTER PACK (67877-218-33) </PackageDescription>
<NDC11Code>67877-0218-38</NDC11Code>
<ProductNDC>67877-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091184</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. Metformin hydrochloride extended-release tablets is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets and metformin hydrochloride extended-release tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets USP contain 500 mg, 850 mg, or 1,000 mg of metformin hydrochloride USP. Each tablet contains the inactive ingredients corn starch, povidone and magnesium stearate. In addition, the coating for each tablet contains hypromellose, talc, titanium dioxide, polyethylene glycol, and propylene glycol. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride as the active ingredient. Metformin hydrochloride extended-release tablets USP, 500 mg and 750 mg contain the inactive ingredients sodium carboxymethyl cellulose, hypromellose, microcrystalline cellulose, magnesium stearate and copovidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68382-218-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (68382-218-10) </PackageDescription>
<NDC11Code>68382-0218-10</NDC11Code>
<ProductNDC>68382-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atomoxetine</ProprietaryName>
<NonProprietaryName>Atomoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079017</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATOMOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Reuptake Inhibitor [EPC], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atomoxetine is a selective norepinephrine reuptake inhibitor indicated for the treatment of Attention-Deficit/Hyperactivity Disorder (ADHD). (1.1).</IndicationAndUsage>
<Description>Atomoxetine is a selective norepinephrine reuptake inhibitor. Atomoxetine hydrochloride is the R(-) isomer as determined by x-ray diffraction. The chemical designation is (-)-N-Methyl-3-phenyl-3-(o-tolyloxy)-propylamine hydrochloride. The molecular formula is C17H21NOHCl, which corresponds to a molecular weight of 291.82. The chemical structure is. Atomoxetine hydrochloride is a white to practically white solid, which has a solubility of 27.8 mg/mL in water. Each atomoxetine capsule intended for oral administration contains atomoxetine hydrochloride, USP equivalent to atomoxetine 10 mg or 18 mg or 25 mg or 40 mg or 60 mg or 80 mg or 100 mg. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, gelatin, pregelatinized starch, sodium lauryl sulfate and titanium dioxide. Additionally each 18 mg capsule shell contains: iron oxide yellow, each 25 mg and 40 mg capsule shell contains: FD & C blue # 2, each 60 mg capsule shell contains: FD & C blue # 2 and iron oxide yellow and each 80 mg and 100 mg capsule shell contains: iron oxide red and iron oxide yellow. The capsule is printed with black pharmaceutical ink which contains following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68382-218-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68382-218-77) / 10 CAPSULE in 1 BLISTER PACK (68382-218-30) </PackageDescription>
<NDC11Code>68382-0218-77</NDC11Code>
<ProductNDC>68382-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atomoxetine</ProprietaryName>
<NonProprietaryName>Atomoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079017</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>ATOMOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Reuptake Inhibitor [EPC], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atomoxetine is a selective norepinephrine reuptake inhibitor indicated for the treatment of Attention-Deficit/Hyperactivity Disorder (ADHD). (1.1).</IndicationAndUsage>
<Description>Atomoxetine is a selective norepinephrine reuptake inhibitor. Atomoxetine hydrochloride is the R(-) isomer as determined by x-ray diffraction. The chemical designation is (-)-N-Methyl-3-phenyl-3-(o-tolyloxy)-propylamine hydrochloride. The molecular formula is C17H21NOHCl, which corresponds to a molecular weight of 291.82. The chemical structure is. Atomoxetine hydrochloride is a white to practically white solid, which has a solubility of 27.8 mg/mL in water. Each atomoxetine capsule intended for oral administration contains atomoxetine hydrochloride, USP equivalent to atomoxetine 10 mg or 18 mg or 25 mg or 40 mg or 60 mg or 80 mg or 100 mg. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, gelatin, pregelatinized starch, sodium lauryl sulfate and titanium dioxide. Additionally each 18 mg capsule shell contains: iron oxide yellow, each 25 mg and 40 mg capsule shell contains: FD & C blue # 2, each 60 mg capsule shell contains: FD & C blue # 2 and iron oxide yellow and each 80 mg and 100 mg capsule shell contains: iron oxide red and iron oxide yellow. The capsule is printed with black pharmaceutical ink which contains following ingredients: black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
</NDCList>