{
"NDC": [
{
"NDCCode": "87063-178-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-178-60) ",
"NDC11Code": "87063-0178-60",
"ProductNDC": "87063-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213136",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260519",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate."
},
{
"NDCCode": "87063-178-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (87063-178-01) ",
"NDC11Code": "87063-0178-01",
"ProductNDC": "87063-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213136",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260519",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate."
},
{
"NDCCode": "87063-178-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (87063-178-30) ",
"NDC11Code": "87063-0178-30",
"ProductNDC": "87063-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213136",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260519",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate."
},
{
"NDCCode": "87063-178-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (87063-178-90) ",
"NDC11Code": "87063-0178-90",
"ProductNDC": "87063-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213136",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260519",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate."
},
{
"NDCCode": "13734-178-60",
"PackageDescription": "1 TUBE in 1 BOX (13734-178-60) / 50 mL in 1 TUBE",
"NDC11Code": "13734-0178-60",
"ProductNDC": "13734-178",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nars Pure Radiant Tinted Moisturizer",
"ProprietaryNameSuffix": "St. Moritz",
"NonProprietaryName": "Octinoxate, Titanium Dioxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "NARS Cosmetics",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "4.044; 3.996",
"StrengthUnit": "g/50mL; g/50mL",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251217",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunbun. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "16590-178-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (16590-178-60)",
"NDC11Code": "16590-0178-60",
"ProductNDC": "16590-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxaprozin",
"NonProprietaryName": "Oxaprozin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075855",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "OXAPROZIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of oxaprozin tablets and other treatment options before deciding to use oxaprozin tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Oxaprozin tablets are indicated: : 1 For relief of the signs and symptoms of osteoarthritis· , 2 For relief of the signs and symptoms of rheumatoid arthritis· , 3 For relief of the signs and symptoms of juvenile rheumatoid arthritis.",
"Description": "Oxaprozin is a nonsteroidal anti-inflammatory drug (NSAID), chemically designated as 4,5-diphenyl-2-oxazole-propionic acid, and has the following chemical structure. The empirical formula for oxaprozin is C18H15NO3, and the molecular weight is 293. Oxaprozin is a white to yellowish-white crystalline powder with a melting point of 162°C to 163°C. It is sparingly soluble in methanol and in ethanol, slightly soluble in ether and practically insoluble in water, with an octanol/water partition coefficient of 4.8 at physiologic pH (7.4). The pKa in water is 4.3. Oxaprozin oral tablets contain 600 mg of oxaprozin. Inactive ingredients in oxaprozin oral tablets are corn starch, D and C Yellow No. 10, FD and C Yellow No. 6, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, methylcellulose, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "42806-178-60",
"PackageDescription": "60 g in 1 BOTTLE (42806-178-60) ",
"NDC11Code": "42806-0178-60",
"ProductNDC": "42806-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nystatin Topical Powder",
"NonProprietaryName": "Nystatin Topical Powder",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210532",
"LabelerName": "Epic Pharma, LLC",
"SubstanceName": "NYSTATIN",
"StrengthNumber": "100000",
"StrengthUnit": "U/g",
"Pharm_Classes": "Polyene Antifungal [EPC], Polyenes [CS]",
"Status": "Active",
"LastUpdate": "2018-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180502",
"SamplePackage": "N",
"IndicationAndUsage": "Nystatin topical powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. Nystatin topical powder is not indicated for systemic, oral, intravaginal or ophthalmic use.",
"Description": "Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.09. Structural formula. Nystatin topical powder is for dermatologic use. Nystatin topical powder contains 100,000 USP nystatin units per gram dispersed in talc."
},
{
"NDCCode": "43353-178-53",
"PackageDescription": "60 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (43353-178-53)",
"NDC11Code": "43353-0178-53",
"ProductNDC": "43353-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prograf",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19940408",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050708",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Prograf is a calcineurin-inhibitor immunosuppressant indicated for: 1 Prophylaxis of organ rejection in patients receiving allogeneic liver, kidney or heart transplants (1.1, 1.2, 1.3), 2 Use concomitantly with adrenal corticosteroids; in kidney and heart transplant, use in conjunction with azathioprine or mycophenolate mofetil (MMF) (1.1, 1.2, 1.3), 3 Limitations of Use (1.4):∘Do not use simultaneously with cyclosporine∘Intravenous use reserved for patients who can not tolerate capsules orally ∘Use with sirolimus is not recommended in liver and heart transplant; use with sirolimus in kidney transplant has not been established.",
"Description": "Prograf is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose monohydrate NF, hypromellose USP, croscarmellose sodium NF, and magnesium stearate NF. The 0.5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF. Prograf is also available as a sterile solution (tacrolimus injection) containing the equivalent of 5 mg anhydrous tacrolimus USP in 1 mL for administration by intravenous infusion only. Each mL contains polyoxyl 60 hydrogenated castor oil (HCO-60), 200 mg, and dehydrated alcohol, USP, 80.0% v/v. Prograf injection must be diluted with 0.9% Sodium Chloride Injection or 5% Dextrose Injection before use. Tacrolimus, previously known as FK506, is the active ingredient in Prograf. Tacrolimus is a macrolide immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]] -5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform."
},
{
"NDCCode": "43353-178-60",
"PackageDescription": "90 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (43353-178-60)",
"NDC11Code": "43353-0178-60",
"ProductNDC": "43353-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prograf",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19940408",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050708",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Prograf is a calcineurin-inhibitor immunosuppressant indicated for: 1 Prophylaxis of organ rejection in patients receiving allogeneic liver, kidney or heart transplants (1.1, 1.2, 1.3), 2 Use concomitantly with adrenal corticosteroids; in kidney and heart transplant, use in conjunction with azathioprine or mycophenolate mofetil (MMF) (1.1, 1.2, 1.3), 3 Limitations of Use (1.4):∘Do not use simultaneously with cyclosporine∘Intravenous use reserved for patients who can not tolerate capsules orally ∘Use with sirolimus is not recommended in liver and heart transplant; use with sirolimus in kidney transplant has not been established.",
"Description": "Prograf is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose monohydrate NF, hypromellose USP, croscarmellose sodium NF, and magnesium stearate NF. The 0.5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF. Prograf is also available as a sterile solution (tacrolimus injection) containing the equivalent of 5 mg anhydrous tacrolimus USP in 1 mL for administration by intravenous infusion only. Each mL contains polyoxyl 60 hydrogenated castor oil (HCO-60), 200 mg, and dehydrated alcohol, USP, 80.0% v/v. Prograf injection must be diluted with 0.9% Sodium Chloride Injection or 5% Dextrose Injection before use. Tacrolimus, previously known as FK506, is the active ingredient in Prograf. Tacrolimus is a macrolide immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]] -5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform."
},
{
"NDCCode": "46122-178-72",
"PackageDescription": "1 BOTTLE in 1 BOX (46122-178-72) > 60 TABLET in 1 BOTTLE",
"NDC11Code": "46122-0178-72",
"ProductNDC": "46122-178",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pain Reliever",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111108",
"EndMarketingDate": "20180131",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "AmerisourceBergen (Good Neighbor Pharmacy) 46122",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "49999-178-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (49999-178-60)",
"NDC11Code": "49999-0178-60",
"ProductNDC": "49999-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19910917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073026",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-06-08",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "58133-959-60",
"PackageDescription": "178 mL in 1 BOTTLE, PUMP (58133-959-60) ",
"NDC11Code": "58133-0959-60",
"ProductNDC": "58133-959",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "AEROSOL, SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210830",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Cosmetic Specialty Labs, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20210830",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria on the skin."
},
{
"NDCCode": "61919-178-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (61919-178-60) ",
"NDC11Code": "61919-0178-60",
"ProductNDC": "61919-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxaprozin",
"NonProprietaryName": "Oxaprozin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075844",
"LabelerName": "DIRECT RX",
"SubstanceName": "OXAPROZIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150101",
"SamplePackage": "N",
"IndicationAndUsage": "Oxaprozin is indicated. For relief of the signs and symptoms of osteoarthritis For relief of the signs and symptoms of rheumatoid arthritis For relief of the signs and symptoms of juvenile rheumatoid arthritis.",
"Description": "Oxaprozin, USP is a nonsteroidal anti-inflammatory drug (NSAID), chemically designated as 4,5-diphenyl-2-oxazole-propionic acid, and has the following chemical structure. The empirical formula for oxaprozin, USP is C18H15NO3, and the molecular weight is 293. Oxaprozin, USP is a white to off-white powder with a slight odor and a melting point of 162°C to 163°C. It is slightly soluble in alcohol and insoluble in water, with an octanol/water partition coefficient of 4.8 at physiologic pH (7.4). The pKa in water is 4.3. Oxaprozin oral tablets contain 600 mg of oxaprozin, USP. Inactive ingredients in oxaprozin tablets, USP are microcrystalline cellulose, methylcellulose, magnesium stearate, starch, sodium starch glycolate, polyethylene glycol, polysorbate 80 and titanium dioxide."
},
{
"NDCCode": "63187-178-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63187-178-60) ",
"NDC11Code": "63187-0178-60",
"ProductNDC": "63187-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20100408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078866",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140501",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder.The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY).A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation.The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablet (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100 mg, 150 mg and 200 mg white to off white, film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: hydroxypropyl cellulose, saccharin, anhydrous lactose, colloidal silicon dioxide, talc, stearic acid, polyvinyl alcohol, titanium dioxide and polyethylene glycol 3350.For 100 mg strength-It meets USP dissolution test 7. For 150 mg and 200 mg strengths-It meets USP dissolution test 2."
},
{
"NDCCode": "64380-178-01",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (64380-178-01) ",
"NDC11Code": "64380-0178-01",
"ProductNDC": "64380-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Accolate",
"NonProprietaryName": "Zafirlukast",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020547",
"LabelerName": "Strides Pharma Science Limited",
"SubstanceName": "ZAFIRLUKAST",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C9 Inhibitors [MoA], Leukotriene Receptor Antagonist [EPC], Leukotriene Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230102",
"SamplePackage": "N",
"IndicationAndUsage": "ACCOLATE is indicated for the prophylaxis and chronic treatment of asthma in adults and children 5 years of age and older.",
"Description": "Zafirlukast is a synthetic, selective peptide leukotriene receptor antagonist (LTRA), with the chemical name 4-(5-cyclopentyloxy-carbonylamino-1-methyl-indol-3-ylmethyl)-3-methoxy-N-o-tolylsulfonylbenzamide. The molecular weight of zafirlukast is 575.7 and the structural formula is. The empirical formula is: C31H33N3O6S. Zafirlukast, a fine white to pale yellow amorphous powder, is practically insoluble in water. It is slightly soluble in methanol and freely soluble in tetrahydrofuran, dimethylsulfoxide, and acetone. ACCOLATE is supplied as 10 and 20 mg tablets for oral administration. Inactive Ingredients: Film-coated tablets containing croscarmellose sodium, lactose, magnesium stearate, microcrystalline cellulose, povidone, hypromellose, and titanium dioxide."
},
{
"NDCCode": "68382-178-14",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (68382-178-14) ",
"NDC11Code": "68382-0178-14",
"ProductNDC": "68382-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Galantamine",
"NonProprietaryName": "Galantamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20111010",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078898",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "GALANTAMINE HYDROBROMIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20111010",
"SamplePackage": "N",
"IndicationAndUsage": "Galantamine is a cholinesterase inhibitor indicated for the treatment of mild to moderate dementia of the Alzheimer's type (1).",
"Description": "Galantamine tablets, USP are galantamine hydrobromide, a reversible, competitive acetylcholinesterase inhibitor. Galantamine hydrobromide is known chemically as (4aS, 6R, 8aS)-4a, 5, 9, 10, 11, 12-hexahydro-3-methoxy-11-methyl-6H-benzofuro[3a, 3, 2- ef][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C17H21NO3HBr and a molecular weight of 368.27. Galantamine hydrobromide, USP is a white to almost white powder and is soluble in 0.1 N sodium hydroxide, sparingly soluble in water, very slightly soluble in alcohol and insoluble in n-propanol. The structural formula for galantamine hydrobromide is:. Galantamine Tablets USP, for oral use are available as round, biconvex, filmcoated immediate release tablets of 4 mg (light-pink), 8 mg (off-white), and 12 mg (off-white). Each 4, 8, and 12 mg (base equivalent) tablet contains 5.126, 10.252, and 15.378 mg of galantamine hydrobromide, respectively. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, propylene glycol and titanium dioxide. Additionally each 4 mg tablet contains iron oxide red and each 8 mg and 12 mg tablet contains iron oxide yellow."
},
{
"NDCCode": "71205-178-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (71205-178-60) ",
"NDC11Code": "71205-0178-60",
"ProductNDC": "71205-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20020129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076001",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020129",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of: : 1 Acute and maintenance treatment of Major Depressive Disorder [see Clinical Studies (14.1)]. , 2 Acute and maintenance treatment of obsessions and compulsions in patients with Obsessive Compulsive Disorder (OCD) [see Clinical Studies (14.2)]. , 3 Acute and maintenance treatment of binge-eating and vomiting behaviors in patients with moderate to severe Bulimia Nervosa [see Clinical Studies (14.3)]. , 4 Acute treatment of Panic Disorder, with or without agoraphobia [see Clinical Studies (14.4)]. .",
"Description": "Fluoxetine Capsules USP are a selective serotonin reuptake inhibitor for oral administration. They are also marketed for the treatment of premenstrual dysphoric disorder (Sarafem®, fluoxetine hydrochloride). It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the following structural formula. C17H18F3NOHCl M.W. 345.79. Fluoxetine hydrochloride, USP is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride, USP equivalent to 10 mg (32.3 µmol) or 20 mg (64.7 µmol) of fluoxetine. In addition, the capsules also contain the following inactive ingredients: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, gelatin, magnesium stearate, pregelatinized corn starch, propylene glycol, shellac, and titanium dioxide."
},
{
"NDCCode": "71610-178-53",
"PackageDescription": "60 TABLET in 1 BOTTLE (71610-178-53) ",
"NDC11Code": "71610-0178-53",
"ProductNDC": "71610-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078203",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2018-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181024",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each Lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are lactose anhydrous, microcrystalline cellulose, polacrilin potassium and magnesium stearate."
},
{
"NDCCode": "71610-178-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (71610-178-60) ",
"NDC11Code": "71610-0178-60",
"ProductNDC": "71610-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078203",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2018-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181024",
"SamplePackage": "N",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each Lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are lactose anhydrous, microcrystalline cellulose, polacrilin potassium and magnesium stearate."
},
{
"NDCCode": "84025-178-01",
"PackageDescription": "60 g in 1 BOTTLE (84025-178-01) ",
"NDC11Code": "84025-0178-01",
"ProductNDC": "84025-178",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Face Cream",
"NonProprietaryName": "Face Cream",
"DosageFormName": "CREAM",
"RouteName": "CUTANEOUS",
"StartMarketingDate": "20240902",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Guangzhou Yanxi Biotechnology Co.. Ltd",
"SubstanceName": "CETEARYL OLIVATE; NIACINAMIDE",
"StrengthNumber": "3; 5",
"StrengthUnit": "mg/60g; mg/60g",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240902",
"SamplePackage": "N",
"IndicationAndUsage": "For daily skin care."
},
{
"NDCCode": "87063-014-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-014-60) ",
"NDC11Code": "87063-0014-60",
"ProductNDC": "87063-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040596",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine Hydrochloride, is useful orally for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17H 20N 2S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate."
},
{
"NDCCode": "87063-015-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-015-60) ",
"NDC11Code": "87063-0015-60",
"ProductNDC": "87063-015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040596",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine Hydrochloride, is useful orally for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17H 20N 2S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate."
},
{
"NDCCode": "87063-016-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-016-60) ",
"NDC11Code": "87063-0016-60",
"ProductNDC": "87063-016",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040596",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251017",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine Hydrochloride, is useful orally for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17H 20N 2S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate."
},
{
"NDCCode": "87063-031-60",
"PackageDescription": "2 POUCH in 1 CARTON (87063-031-60) / 30 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "87063-0031-60",
"ProductNDC": "87063-031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol Sulfate",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19970917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074880",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251107",
"SamplePackage": "N",
"IndicationAndUsage": "Albuterol inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.",
"Description": "Albuterol inhalation solution, USP is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGYsection below). Albuterol sulfate USP, the racemic form of albuterol, has the chemical name α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α′-diol sulfate (2:1) (salt) and the following structural formula:. Albuterol sulfate has a molecular weight of 576.7, and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization’s recommended name for albuterol base is salbutamol. Albuterol inhalation solution, USP 0.083% requires no dilution before administration. Each mL of albuterol inhalation solution, USP (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate USP) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol inhalation solution, USP (0.083%) contains no sulfiting agents. Albuterol inhalation solution, USP is a clear, colorless to light yellow solution."
},
{
"NDCCode": "87063-032-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-032-60) ",
"NDC11Code": "87063-0032-60",
"ProductNDC": "87063-032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207510",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251125",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia. Oxycodone and Acetaminophen Tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg. Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg. Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg. Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2and the molecular weight is 151.17. It may be represented by the following structural formula:."
},
{
"NDCCode": "87063-033-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-033-60) ",
"NDC11Code": "87063-0033-60",
"ProductNDC": "87063-033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207510",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251125",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia. Oxycodone and Acetaminophen Tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg. Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg. Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg. Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2and the molecular weight is 151.17. It may be represented by the following structural formula:."
},
{
"NDCCode": "87063-034-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (87063-034-60) ",
"NDC11Code": "87063-0034-60",
"ProductNDC": "87063-034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207510",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN",
"StrengthNumber": "10; 325",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251125",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia. Oxycodone and Acetaminophen Tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.",
"Description": "Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg. Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg. Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg. Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2and the molecular weight is 151.17. It may be represented by the following structural formula:."
},
{
"NDCCode": "87063-037-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (87063-037-60) ",
"NDC11Code": "87063-0037-60",
"ProductNDC": "87063-037",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091123",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019892",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251204",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C 17H 19NO 3∙HCl, and it has the following chemical structure:. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye."
},
{
"NDCCode": "87063-038-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (87063-038-60) ",
"NDC11Code": "87063-0038-60",
"ProductNDC": "87063-038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091123",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019892",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251204",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C 17H 19NO 3∙HCl, and it has the following chemical structure:. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye."
},
{
"NDCCode": "87063-039-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (87063-039-60) ",
"NDC11Code": "87063-0039-60",
"ProductNDC": "87063-039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091123",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019892",
"LabelerName": "ASCLEMED USA INC.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251204",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C 17H 19NO 3∙HCl, and it has the following chemical structure:. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>87063-178-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-178-60) </PackageDescription>
<NDC11Code>87063-0178-60</NDC11Code>
<ProductNDC>87063-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213136</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>87063-178-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (87063-178-01) </PackageDescription>
<NDC11Code>87063-0178-01</NDC11Code>
<ProductNDC>87063-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213136</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>87063-178-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (87063-178-30) </PackageDescription>
<NDC11Code>87063-0178-30</NDC11Code>
<ProductNDC>87063-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213136</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>87063-178-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (87063-178-90) </PackageDescription>
<NDC11Code>87063-0178-90</NDC11Code>
<ProductNDC>87063-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213136</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>13734-178-60</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13734-178-60) / 50 mL in 1 TUBE</PackageDescription>
<NDC11Code>13734-0178-60</NDC11Code>
<ProductNDC>13734-178</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nars Pure Radiant Tinted Moisturizer</ProprietaryName>
<ProprietaryNameSuffix>St. Moritz</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Titanium Dioxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>NARS Cosmetics</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>4.044; 3.996</StrengthNumber>
<StrengthUnit>g/50mL; g/50mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunbun. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16590-178-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (16590-178-60)</PackageDescription>
<NDC11Code>16590-0178-60</NDC11Code>
<ProductNDC>16590-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxaprozin</ProprietaryName>
<NonProprietaryName>Oxaprozin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075855</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>OXAPROZIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of oxaprozin tablets and other treatment options before deciding to use oxaprozin tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Oxaprozin tablets are indicated: : 1 For relief of the signs and symptoms of osteoarthritis· , 2 For relief of the signs and symptoms of rheumatoid arthritis· , 3 For relief of the signs and symptoms of juvenile rheumatoid arthritis.</IndicationAndUsage>
<Description>Oxaprozin is a nonsteroidal anti-inflammatory drug (NSAID), chemically designated as 4,5-diphenyl-2-oxazole-propionic acid, and has the following chemical structure. The empirical formula for oxaprozin is C18H15NO3, and the molecular weight is 293. Oxaprozin is a white to yellowish-white crystalline powder with a melting point of 162°C to 163°C. It is sparingly soluble in methanol and in ethanol, slightly soluble in ether and practically insoluble in water, with an octanol/water partition coefficient of 4.8 at physiologic pH (7.4). The pKa in water is 4.3. Oxaprozin oral tablets contain 600 mg of oxaprozin. Inactive ingredients in oxaprozin oral tablets are corn starch, D and C Yellow No. 10, FD and C Yellow No. 6, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, methylcellulose, microcrystalline cellulose, polydextrose, polyethylene glycol, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>42806-178-60</NDCCode>
<PackageDescription>60 g in 1 BOTTLE (42806-178-60) </PackageDescription>
<NDC11Code>42806-0178-60</NDC11Code>
<ProductNDC>42806-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nystatin Topical Powder</ProprietaryName>
<NonProprietaryName>Nystatin Topical Powder</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210532</ApplicationNumber>
<LabelerName>Epic Pharma, LLC</LabelerName>
<SubstanceName>NYSTATIN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>U/g</StrengthUnit>
<Pharm_Classes>Polyene Antifungal [EPC], Polyenes [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180502</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nystatin topical powder is indicated in the treatment of cutaneous or mucocutaneous mycotic infections caused by Candida albicans and other susceptible Candida species. Nystatin topical powder is not indicated for systemic, oral, intravaginal or ophthalmic use.</IndicationAndUsage>
<Description>Nystatin is a polyene antifungal antibiotic obtained from Streptomyces noursei. The molecular formula for Nystatin is C47H75NO17. The molecular weight of Nystatin is 926.09. Structural formula. Nystatin topical powder is for dermatologic use. Nystatin topical powder contains 100,000 USP nystatin units per gram dispersed in talc.</Description>
</NDC>
<NDC>
<NDCCode>43353-178-53</NDCCode>
<PackageDescription>60 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (43353-178-53)</PackageDescription>
<NDC11Code>43353-0178-53</NDC11Code>
<ProductNDC>43353-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prograf</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19940408</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050708</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prograf is a calcineurin-inhibitor immunosuppressant indicated for: 1 Prophylaxis of organ rejection in patients receiving allogeneic liver, kidney or heart transplants (1.1, 1.2, 1.3), 2 Use concomitantly with adrenal corticosteroids; in kidney and heart transplant, use in conjunction with azathioprine or mycophenolate mofetil (MMF) (1.1, 1.2, 1.3), 3 Limitations of Use (1.4):∘Do not use simultaneously with cyclosporine∘Intravenous use reserved for patients who can not tolerate capsules orally ∘Use with sirolimus is not recommended in liver and heart transplant; use with sirolimus in kidney transplant has not been established.</IndicationAndUsage>
<Description>Prograf is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose monohydrate NF, hypromellose USP, croscarmellose sodium NF, and magnesium stearate NF. The 0.5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF. Prograf is also available as a sterile solution (tacrolimus injection) containing the equivalent of 5 mg anhydrous tacrolimus USP in 1 mL for administration by intravenous infusion only. Each mL contains polyoxyl 60 hydrogenated castor oil (HCO-60), 200 mg, and dehydrated alcohol, USP, 80.0% v/v. Prograf injection must be diluted with 0.9% Sodium Chloride Injection or 5% Dextrose Injection before use. Tacrolimus, previously known as FK506, is the active ingredient in Prograf. Tacrolimus is a macrolide immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]] -5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform.</Description>
</NDC>
<NDC>
<NDCCode>43353-178-60</NDCCode>
<PackageDescription>90 CAPSULE, GELATIN COATED in 1 BOTTLE, PLASTIC (43353-178-60)</PackageDescription>
<NDC11Code>43353-0178-60</NDC11Code>
<ProductNDC>43353-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prograf</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19940408</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050708</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC],Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prograf is a calcineurin-inhibitor immunosuppressant indicated for: 1 Prophylaxis of organ rejection in patients receiving allogeneic liver, kidney or heart transplants (1.1, 1.2, 1.3), 2 Use concomitantly with adrenal corticosteroids; in kidney and heart transplant, use in conjunction with azathioprine or mycophenolate mofetil (MMF) (1.1, 1.2, 1.3), 3 Limitations of Use (1.4):∘Do not use simultaneously with cyclosporine∘Intravenous use reserved for patients who can not tolerate capsules orally ∘Use with sirolimus is not recommended in liver and heart transplant; use with sirolimus in kidney transplant has not been established.</IndicationAndUsage>
<Description>Prograf is available for oral administration as capsules (tacrolimus capsules USP) containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus USP. Inactive ingredients include lactose monohydrate NF, hypromellose USP, croscarmellose sodium NF, and magnesium stearate NF. The 0.5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF, the 1 mg capsule shell contains gelatin NF and titanium dioxide USP, and the 5 mg capsule shell contains gelatin NF, titanium dioxide USP and ferric oxide NF. Prograf is also available as a sterile solution (tacrolimus injection) containing the equivalent of 5 mg anhydrous tacrolimus USP in 1 mL for administration by intravenous infusion only. Each mL contains polyoxyl 60 hydrogenated castor oil (HCO-60), 200 mg, and dehydrated alcohol, USP, 80.0% v/v. Prograf injection must be diluted with 0.9% Sodium Chloride Injection or 5% Dextrose Injection before use. Tacrolimus, previously known as FK506, is the active ingredient in Prograf. Tacrolimus is a macrolide immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)], 4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]] -5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4] oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. The chemical structure of tacrolimus is. Tacrolimus has an empirical formula of C44H69NO12H2O and a formula weight of 822.03. Tacrolimus appears as white crystals or crystalline powder. It is practically insoluble in water, freely soluble in ethanol, and very soluble in methanol and chloroform.</Description>
</NDC>
<NDC>
<NDCCode>46122-178-72</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (46122-178-72) > 60 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>46122-0178-72</NDC11Code>
<ProductNDC>46122-178</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pain Reliever</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111108</StartMarketingDate>
<EndMarketingDate>20180131</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>AmerisourceBergen (Good Neighbor Pharmacy) 46122</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>49999-178-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (49999-178-60)</PackageDescription>
<NDC11Code>49999-0178-60</NDC11Code>
<ProductNDC>49999-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19910917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073026</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-06-08</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>58133-959-60</NDCCode>
<PackageDescription>178 mL in 1 BOTTLE, PUMP (58133-959-60) </PackageDescription>
<NDC11Code>58133-0959-60</NDC11Code>
<ProductNDC>58133-959</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>AEROSOL, SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210830</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Cosmetic Specialty Labs, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210830</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>61919-178-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (61919-178-60) </PackageDescription>
<NDC11Code>61919-0178-60</NDC11Code>
<ProductNDC>61919-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxaprozin</ProprietaryName>
<NonProprietaryName>Oxaprozin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075844</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>OXAPROZIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxaprozin is indicated. For relief of the signs and symptoms of osteoarthritis For relief of the signs and symptoms of rheumatoid arthritis For relief of the signs and symptoms of juvenile rheumatoid arthritis.</IndicationAndUsage>
<Description>Oxaprozin, USP is a nonsteroidal anti-inflammatory drug (NSAID), chemically designated as 4,5-diphenyl-2-oxazole-propionic acid, and has the following chemical structure. The empirical formula for oxaprozin, USP is C18H15NO3, and the molecular weight is 293. Oxaprozin, USP is a white to off-white powder with a slight odor and a melting point of 162°C to 163°C. It is slightly soluble in alcohol and insoluble in water, with an octanol/water partition coefficient of 4.8 at physiologic pH (7.4). The pKa in water is 4.3. Oxaprozin oral tablets contain 600 mg of oxaprozin, USP. Inactive ingredients in oxaprozin tablets, USP are microcrystalline cellulose, methylcellulose, magnesium stearate, starch, sodium starch glycolate, polyethylene glycol, polysorbate 80 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63187-178-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63187-178-60) </PackageDescription>
<NDC11Code>63187-0178-60</NDC11Code>
<ProductNDC>63187-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078866</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder.The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY).A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation.The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablet (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100 mg, 150 mg and 200 mg white to off white, film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: hydroxypropyl cellulose, saccharin, anhydrous lactose, colloidal silicon dioxide, talc, stearic acid, polyvinyl alcohol, titanium dioxide and polyethylene glycol 3350.For 100 mg strength-It meets USP dissolution test 7. For 150 mg and 200 mg strengths-It meets USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>64380-178-01</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (64380-178-01) </PackageDescription>
<NDC11Code>64380-0178-01</NDC11Code>
<ProductNDC>64380-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Accolate</ProprietaryName>
<NonProprietaryName>Zafirlukast</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020547</ApplicationNumber>
<LabelerName>Strides Pharma Science Limited</LabelerName>
<SubstanceName>ZAFIRLUKAST</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C9 Inhibitors [MoA], Leukotriene Receptor Antagonist [EPC], Leukotriene Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ACCOLATE is indicated for the prophylaxis and chronic treatment of asthma in adults and children 5 years of age and older.</IndicationAndUsage>
<Description>Zafirlukast is a synthetic, selective peptide leukotriene receptor antagonist (LTRA), with the chemical name 4-(5-cyclopentyloxy-carbonylamino-1-methyl-indol-3-ylmethyl)-3-methoxy-N-o-tolylsulfonylbenzamide. The molecular weight of zafirlukast is 575.7 and the structural formula is. The empirical formula is: C31H33N3O6S. Zafirlukast, a fine white to pale yellow amorphous powder, is practically insoluble in water. It is slightly soluble in methanol and freely soluble in tetrahydrofuran, dimethylsulfoxide, and acetone. ACCOLATE is supplied as 10 and 20 mg tablets for oral administration. Inactive Ingredients: Film-coated tablets containing croscarmellose sodium, lactose, magnesium stearate, microcrystalline cellulose, povidone, hypromellose, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68382-178-14</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (68382-178-14) </PackageDescription>
<NDC11Code>68382-0178-14</NDC11Code>
<ProductNDC>68382-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Galantamine</ProprietaryName>
<NonProprietaryName>Galantamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111010</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078898</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Galantamine is a cholinesterase inhibitor indicated for the treatment of mild to moderate dementia of the Alzheimer's type (1).</IndicationAndUsage>
<Description>Galantamine tablets, USP are galantamine hydrobromide, a reversible, competitive acetylcholinesterase inhibitor. Galantamine hydrobromide is known chemically as (4aS, 6R, 8aS)-4a, 5, 9, 10, 11, 12-hexahydro-3-methoxy-11-methyl-6H-benzofuro[3a, 3, 2- ef][2]benzazepin-6-ol hydrobromide. It has a molecular formula of C17H21NO3HBr and a molecular weight of 368.27. Galantamine hydrobromide, USP is a white to almost white powder and is soluble in 0.1 N sodium hydroxide, sparingly soluble in water, very slightly soluble in alcohol and insoluble in n-propanol. The structural formula for galantamine hydrobromide is:. Galantamine Tablets USP, for oral use are available as round, biconvex, filmcoated immediate release tablets of 4 mg (light-pink), 8 mg (off-white), and 12 mg (off-white). Each 4, 8, and 12 mg (base equivalent) tablet contains 5.126, 10.252, and 15.378 mg of galantamine hydrobromide, respectively. Inactive ingredients include colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, propylene glycol and titanium dioxide. Additionally each 4 mg tablet contains iron oxide red and each 8 mg and 12 mg tablet contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>71205-178-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (71205-178-60) </PackageDescription>
<NDC11Code>71205-0178-60</NDC11Code>
<ProductNDC>71205-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076001</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of: : 1 Acute and maintenance treatment of Major Depressive Disorder [see Clinical Studies (14.1)]. , 2 Acute and maintenance treatment of obsessions and compulsions in patients with Obsessive Compulsive Disorder (OCD) [see Clinical Studies (14.2)]. , 3 Acute and maintenance treatment of binge-eating and vomiting behaviors in patients with moderate to severe Bulimia Nervosa [see Clinical Studies (14.3)]. , 4 Acute treatment of Panic Disorder, with or without agoraphobia [see Clinical Studies (14.4)]. .</IndicationAndUsage>
<Description>Fluoxetine Capsules USP are a selective serotonin reuptake inhibitor for oral administration. They are also marketed for the treatment of premenstrual dysphoric disorder (Sarafem®, fluoxetine hydrochloride). It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the following structural formula. C17H18F3NOHCl M.W. 345.79. Fluoxetine hydrochloride, USP is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride, USP equivalent to 10 mg (32.3 µmol) or 20 mg (64.7 µmol) of fluoxetine. In addition, the capsules also contain the following inactive ingredients: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, gelatin, magnesium stearate, pregelatinized corn starch, propylene glycol, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71610-178-53</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71610-178-53) </PackageDescription>
<NDC11Code>71610-0178-53</NDC11Code>
<ProductNDC>71610-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078203</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2018-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each Lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are lactose anhydrous, microcrystalline cellulose, polacrilin potassium and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>71610-178-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71610-178-60) </PackageDescription>
<NDC11Code>71610-0178-60</NDC11Code>
<ProductNDC>71610-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078203</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2018-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each Lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are lactose anhydrous, microcrystalline cellulose, polacrilin potassium and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>84025-178-01</NDCCode>
<PackageDescription>60 g in 1 BOTTLE (84025-178-01) </PackageDescription>
<NDC11Code>84025-0178-01</NDC11Code>
<ProductNDC>84025-178</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Face Cream</ProprietaryName>
<NonProprietaryName>Face Cream</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>CUTANEOUS</RouteName>
<StartMarketingDate>20240902</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Guangzhou Yanxi Biotechnology Co.. Ltd</LabelerName>
<SubstanceName>CETEARYL OLIVATE; NIACINAMIDE</SubstanceName>
<StrengthNumber>3; 5</StrengthNumber>
<StrengthUnit>mg/60g; mg/60g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240902</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For daily skin care.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>87063-014-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-014-60) </PackageDescription>
<NDC11Code>87063-0014-60</NDC11Code>
<ProductNDC>87063-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040596</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine Hydrochloride, is useful orally for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17H 20N 2S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate.</Description>
</NDC>
<NDC>
<NDCCode>87063-015-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-015-60) </PackageDescription>
<NDC11Code>87063-0015-60</NDC11Code>
<ProductNDC>87063-015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040596</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine Hydrochloride, is useful orally for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17H 20N 2S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate.</Description>
</NDC>
<NDC>
<NDCCode>87063-016-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-016-60) </PackageDescription>
<NDC11Code>87063-0016-60</NDC11Code>
<ProductNDC>87063-016</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040596</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine Hydrochloride, is useful orally for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Each tablet of promethazine hydrochloride contains 12.5 mg, 25 mg, or 50 mg promethazine hydrochloride. The inactive ingredients present are hydroxypropyl cellulose, lactose monohydrate, low-substituted hydroxypropyl cellulose and magnesium stearate. Promethazine hydrochloride is a racemic compound; the molecular formula is C 17H 20N 2S HCl and its molecular weight is 320.88. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water, in hot dehydrated alcohol, and in chloroform; practically insoluble in ether, in acetone and in ethyl acetate.</Description>
</NDC>
<NDC>
<NDCCode>87063-031-60</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (87063-031-60) / 30 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>87063-0031-60</NDC11Code>
<ProductNDC>87063-031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19970917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074880</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albuterol inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.</IndicationAndUsage>
<Description>Albuterol inhalation solution, USP is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGYsection below). Albuterol sulfate USP, the racemic form of albuterol, has the chemical name α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α′-diol sulfate (2:1) (salt) and the following structural formula:. Albuterol sulfate has a molecular weight of 576.7, and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate, USP is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization’s recommended name for albuterol base is salbutamol. Albuterol inhalation solution, USP 0.083% requires no dilution before administration. Each mL of albuterol inhalation solution, USP (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate USP) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol inhalation solution, USP (0.083%) contains no sulfiting agents. Albuterol inhalation solution, USP is a clear, colorless to light yellow solution.</Description>
</NDC>
<NDC>
<NDCCode>87063-032-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-032-60) </PackageDescription>
<NDC11Code>87063-0032-60</NDC11Code>
<ProductNDC>87063-032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207510</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia. Oxycodone and Acetaminophen Tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg. Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg. Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg. Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2and the molecular weight is 151.17. It may be represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>87063-033-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-033-60) </PackageDescription>
<NDC11Code>87063-0033-60</NDC11Code>
<ProductNDC>87063-033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207510</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia. Oxycodone and Acetaminophen Tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg. Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg. Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg. Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2and the molecular weight is 151.17. It may be represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>87063-034-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (87063-034-60) </PackageDescription>
<NDC11Code>87063-0034-60</NDC11Code>
<ProductNDC>87063-034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207510</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>10; 325</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets, is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets, for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated, or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia. Oxycodone and Acetaminophen Tablets should not be used for an extended period of time unless the pain remains severe enough to require an opioid analgesic and for which alternative treatment options continue to be inadequate.</IndicationAndUsage>
<Description>Oxycodone and Acetaminophen Tablets, USP is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone hydrochloride USP 5 mg* (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg Oxycodone) Acetaminophen USP................................................. 325 mg. Oxycodone hydrochloride, USP 7.5 mg* (*7.5 mg oxycodone HCl is equivalent to 6.7228 mg of oxycodone) Acetaminophen USP.............................................……....... 325 mg. Oxycodone hydrochloride, USP 10 mg* (*10 mg oxycodone HCl is equivalent to 8.9637 mg of oxycodone) Acetaminophen USP...................................................…..... 325 mg. Inactive Ingredients. The tablets contain: Colloidal silicon dioxide, pregelatinized starch, crospovidone, croscarmellose sodium, microcrystalline cellulose, stearic acid and magnesium stearate. In addition, the 5 mg/325 mg strength contains FD&C Blue # 1 Aluminum Lake and the 7.5 mg/325 mg strength contains FD&C Red # 40 Aluminum Lake. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, 4'-hydroxyacetanilie, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder. The molecular formula for acetaminophen is C 8H 9NO 2and the molecular weight is 151.17. It may be represented by the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>87063-037-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (87063-037-60) </PackageDescription>
<NDC11Code>87063-0037-60</NDC11Code>
<ProductNDC>87063-037</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091123</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019892</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C 17H 19NO 3∙HCl, and it has the following chemical structure:. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye.</Description>
</NDC>
<NDC>
<NDCCode>87063-038-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (87063-038-60) </PackageDescription>
<NDC11Code>87063-0038-60</NDC11Code>
<ProductNDC>87063-038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091123</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019892</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C 17H 19NO 3∙HCl, and it has the following chemical structure:. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye.</Description>
</NDC>
<NDC>
<NDCCode>87063-039-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (87063-039-60) </PackageDescription>
<NDC11Code>87063-0039-60</NDC11Code>
<ProductNDC>87063-039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091123</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019892</ApplicationNumber>
<LabelerName>ASCLEMED USA INC.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone hydrochloride oral solution and hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular Weight is 321.80. Its molecular formula is C 17H 19NO 3∙HCl, and it has the following chemical structure:. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. Hydromorphone hydrochloride tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye.</Description>
</NDC>
</NDCList>